Rolls-Royce Archives
| Identifier | Entry | ||
| scan0001 | Letter from Marconi-Ekco Instruments Ltd. proposing the development of a 'Riding Comfort Meter'. | ||
| View original record | 1306 MARCONI-EKCO INSTRUMENTS LTD. DIRECTORS: RT. HON. LORD INVERFORTH. P.C., (CHAIRMAN) W. S. VERRELLS H. A. WHITE E. K. COLE E. WILSHAW. J.P., F.C.I.S. H. R. C. VAN DE VELDE ELECTRA HOUSE VICTORIA… | ||
| scan0002 | Need for more practical limits for chassis road springs. | ||
| View original record | [Handwritten]: 1306 To Rm. from Hs. [Handwritten, struck through]: c. to RHC. [Handwritten]: Kes. Please let me have your recommendation [Handwritten Initials]: Rm Chassis Road Springs. We should be… | ||
| scan0003 | List of obsolete road springs giving quantities, piece numbers, and poundage values. | ||
| View original record | C O P Y. (handwritten: 130/b) Roy/Dn. G/Mt4/MB.19.1136. Herewith please receive List of Obsolete Road Springs giving poundage, etc. as per your request:- (Handwritten note in left margin: 14 lbs) Qty.… | ||
| scan0004 | Les' recommendations for chassis road springs and a noted misunderstanding. | ||
| View original record | To Hs. from Rm. c. to RHC. File x576 x346 1306 Rm.17/AP.20.11.36. CHASSIS ROAD SPRINGS. Herewith Les,' recommendations. I think RHC. must have been misinformed somewhat, but a talk should clear the… | ||
| scan0005 | Chassis road spring poundage, specifications, and ordering procedures for various models. | ||
| View original record | 1306 To Hs. from Rm/Les. c.c. to RHC. Rm/Les.18/AP.20.11.36. CHASSIS ROAD SPRINGS. Re. No.8/KW.18.11.36. The chassis held up for road springs is 3-AX-87. This chassis has been re-allotted and is now… | ||
| scan0006 | Table of deflection, buffer clearance, and car height variations for Bentley, 30.HP, and Phantom III models. | ||
| View original record | -2- Rm/Les.18/AP.20.11.36. If the ideal poundage figures on the Erection Card were correct, the following would result from a ± 50 lbs. limit for spring selection. This gives a variation of 100 lbs. |… | ||
| scan0007 | Letter to Marconi-Ekco Instruments Ltd. regarding instruments for measuring riding comfort and shock absorbers. | ||
| View original record | 1306 Experimental Department Rm/Les.14/AP. 23rd November 1936. Messrs Marconi-Ekco Instruments Ltd., Electra House, Victoria Embankment, LONDON W.C.2. For the attention of Mr.H.E.Perkins. Dear Sirs,… | ||
| scan0008 | Clarifying a misunderstanding regarding the fitting of different weight road springs due to availability. | ||
| View original record | 1306 RHC. C.H.H. C.Rm. RHC/TVT.1/IB. 25.11.36. re. CHASSIS ROAD SPRINGS ------------------------- With reference to paragraph one in memo' Rm/LES18/AP.20.11.36.. I think there must be some… | ||
| scan0009 | Reasons for changing chassis road springs and strategies for reducing spring scrap. | ||
| View original record | To Hs. from Rm. 1306 Rm.14/AP.30.11.36. CHASSIS ROAD SPRINGS. Changing Springs. We have gone over the points you raised in connection with Chassis Road Springs. We have been unable to substantiate… | ||
| scan0010 | Process of ordering car springs and managing redundant and scrap stock. | ||
| View original record | -2- (c) The skill which the D.O. exercise in the poundage of springs they order. We are satisfied that once a car has got into Production and the average body weight is obtainable, they do this well.… | ||
| scan0011 | Scrapping or utilisation of £2,000 worth of obsolete road springs. | ||
| View original record | Hs. from Rm. c. to By. c. to RHC. 1306 Rm9/R.4.12.36. OBSOLETE ROAD SPRINGS. You mentioned to us the other day that there were some £2,000 worth of obsolete road springs in the Stores, and that, you… | ||
| scan0012 | The valuation and allocation of obsolete Phantom II and 25 HP road springs. | ||
| View original record | 1306 Rm/Les/R/4.12.36. OBSOLETE PHANTOM II and 25 H.P. ROAD SPRINGS. The price paid for the attached list of obsolete road springs was £2199/2/-. We recommend that the following value in springs… | ||
| scan0013 | Status, cost, and proposed use or scrapping of various car springs. | ||
| View original record | Rm/Les/R.5.12.36. (1) £656/2/- for 162 25 H.P. normal type rear springs which could be used in conjunction with low rating front springs for close-coupled cars. The difference in these springs from… | ||
| scan0014 | List of obsolete road springs with quantities, piece numbers, and poundage values. | ||
| View original record | Roy/Dn. G/Mt4/MB.19.11.36. Herewith please receive List of Obsolete Road Springs giving poundage, etc., as per your request:- Qty. Piece No. Poundage. 1 F84582 1150 [Handwritten: Suffer] 2 F84582 1200… | ||
| scan0015 | Continuation page listing quantities and poundage specifications for piece number F58597. | ||
| View original record | -2- G/Mt4/MB.19.11.36. Cont'd. Qty. Piece No. Poundage 21 F58597 1200 Rear 12 F58597 900 " 15 F58597 1000 Rear. 114 F58597 1100 " 162 x £4 u lu = £650 £4 in la Normal G/Mt. TWT | ||
| scan0016 | Data table recording type load, actual load, and plate thickness measurements for various test pieces. | ||
| View original record | DRG. N°: F.58608, F.58608, F.58608, F.58608 PIECE N°: F.58612, F.58611, F.58611, F.58611 TYPE LOAD: 1200 LBS., 1100 LBS., 1100 LBS., 1100 LBS. ACTUAL LOAD: 1178 LBS., 1148 LBS., 1130 LBS., 1060 LBS.… | ||
| scan0017 | Suggestions for simplifying chassis road spring specifications and production procedures. | ||
| View original record | To By. from Rm/Les. c. to Hs. c. to RHC. CHASSIS ROAD SPRINGS. We make the following suggestions in order to:- 1. Reduce collections of obsolete springs. 2. Make the production procedure far less… | ||
| scan0018 | Standardizing the numbering and specifications for vehicle springs, focusing on piece numbers, lubrication, and poundage. | ||
| View original record | -2- Rm/Les.2/AP.15.12.36. The Piece Number. A spring made to the same drawing, but varying in 50 lbs. from another spring is given a different "Piece No.". In the case of the 30 HP. rear springs, a… | ||
| scan0019 | The selection of springs, detailing poundage specifications and recommendations for Ph.III, 30 HP, and Bentley models. | ||
| View original record | -3- It is recommended that springs be ordered to the. "Drawing Numbers" and the "Average Ideal Poundage", even if this figure is an intermediate poundage as 1375 lbs. Selection of Springs. On the… | ||
| scan0020 | List of proposed alterations and specifications for spring drawings. | ||
| View original record | -4- Rm/Les.2/AP.15.12.36. Alterations to Spring Drawings. The following alterations would help the manufacturers and safeguard the important features which might effect the customer - 1. Deletion of… | ||
| scan0021 | Standardization of part numbers and specifications for road springs. | ||
| View original record | J 1306. To By. from Rm. c. to Hs. c. to RHC. Rm.1/AP.15.12.36. ROAD SPRINGS. Further to our discussion the other day, Les. has been going further into the matter. It does seem to me to be reasonable… | ||
| scan0022 | The disposal and stocking of obsolete road springs before stocktaking. | ||
| View original record | RT. Cashier. cc.Roy. C. Rn. cc.Huv. KES B06 RHC/TVT.1/MMG.15.12.36. OBSOLETE ROAD SPRINGS. Referring to Rm.9/H.4.12.36. We should be pleased if the D.O. will confirm L.E.S. recommendations in the… | ||
| scan0023 | Decision to scrap or modify obsolete road springs for various car models. | ||
| View original record | 1306. BY./G.17.12.36. LES OBSOLETE ROAD SPRINGS. Referring to Rm.9/R.4.12.36. and RHC/TVT.1/ EMG.15.12.36., in the latter of which I am asked to give my views upon the position outlined in… | ||
| scan0024 | Valuation and decisions regarding obsolete and surplus car springs. | ||
| View original record | - 2 - (3). Repair Department - Value £52. 12. 0. This only earmarks springs which the Repair Depart- ment are willing to take over as good stock. (4). 114 Front Springs for 25/30 HP. Normal Rating… | ||
| scan0025 | Letter to the English Steel Corporation requesting the production of a pair of Bentley rear springs. | ||
| View original record | Experimental department 18th December 1936. Rm/Les.1/AP. The English Steel Corporation, Vickers Works, SHEFFIELD. For the attention of Mr.Gray. Dear Sirs, This is to confirm that we should like you to… | ||
| scan0026 | Covering order for special Bentley rear road springs. | ||
| View original record | 1306 To Roy/Ms. from Rm/Les. c. to G/JWH. Rm/Les.3/AP.18.12.36. O/54107 Will you please issue a covering order to The English Steel Corporation for a pair of special Bentley rear road springs as… | ||
| scan0027 | Low stock levels of Phantom III rear springs and the requirement for new brackets or shackle pins. | ||
| View original record | RHC. c. Rm. c. By. (crossed out) c. He. (crossed out) LES 1306 (LES is crossed out) RHC/TVT.1/JWA.22.12.36. Phantom III Rear Springs. Referring to Rm./Les.2/AP.18.12.36. We agree that our stocks of… | ||
| scan0028 | Directive to use normal type rear road springs with low rated front springs on the 25/30 HP chassis. | ||
| View original record | LcS BY/HEH. [struck through] REC. [struck through] c. Rm. [struck through] BY.15/C.29.12.36. 1306 25/30 HP. CHASSIS ROAD SPRINGS. As a result of a Conference held on 22.12.36. on chassis work, it has… | ||
| scan0029 | Instruction on the required tolerances for quoting the poundage of road springs. | ||
| View original record | BY/RWC c. Rm. 1306 BY.4/G.1.1.37. ROAD SPRINGS. In future please arrange to quote the exact poundage the particular chassis requires, and do not quote any other figure. Instruct the Works they can… | ||
| scan0030 | Causes of obsolete road springs and production procedures for new ones. | ||
| View original record | Rm. RHC. Hs. BY.5/G.1.1.37. GRY ? LES ? ROAD SPRINGS Referring to Rm.1/AP.15.12.36. and Rm/Les.2/AP.15.12.36. there are certain points which must not go unchallenged in the above memos. (1). Reduction… | ||
| scan0031 | Technical discussion on spring specifications, including poundage, camber, and part numbering. | ||
| View original record | - 2 - EY.5/G.1.1.37. (3). Simplification of the spring drawing is purely imaginary, in any case it does not affect the springs. Spring Specification. (a). We must have a type number, we cannot revert… | ||
| scan0032 | Spring manufacturing specifications, weight tolerances, and pricing expectations. | ||
| View original record | - 3 - (8). The plates are not rolled to size, they are all finally ground to a close dimension after rolling to clear the plates of surface defects and decarburised areas. (9). If I call for 1400 lb.… | ||
| scan0033 | Suggesting cost-saving measures for axle springs by deleting cadmium plating and machine grinding. | ||
| View original record | BY. c. Hs. c. Rm/Les. Roy/Dn6/ME. 6.1.37. AXLE SPRINGS. In connection with the investigation of the above item, with a view to effecting economies, the following are two suggestions:- (a) Deletion of… | ||
| scan0034 | Use of obsolete road springs on new car models and testing simplified Wraith springs. | ||
| View original record | 1306 Hs. from Rm. Rm5/R.8.1.37. OBSOLETE ROAD SPRINGS. All the road springs which we recommended should be utilised are in process of being absorbed with the exception of the Continental P.II rear… | ||
| scan0035 | Road test and comparison of a specially sprung 25 HP car's suspension. | ||
| View original record | Les. Interesting. Have written to Hancock for particulars Rm 1306 HOTEL DE FRANCE. CHATEAUROUX. Indre. France. To. Rm. At Sr's request I went up to Paris Thursday night to try a specially sprung 25… | ||
| scan0036 | Manufacturing processes for road springs, including grinding, eye construction, and plating. | ||
| View original record | To By. from Rm/Les. c. Roy. c. Hs. 1306 Rm/Les.22/AP.18.1.37. ROAD SPRINGS. Re Roy/Dn.6/ME.6.1.37. We think machine grinding should be deleted on Phantom III. The 25.HP. springs which are higher… | ||
| scan0037 | Comparative table of suspension data for Phantom III, 30 HP, and Bentley models. | ||
| View original record | 1306 | | SPRING RATE | BUFFER CLEARANCE | CHANGE IN BUFFER CLNC. DUE TO 50LBS | REDUCTION IN BUFFER CLNC FOR 50 LBS. | POUNDAGE NECESSARY TO MAKE 7% CHANGE IN BUFFER CLNC. | |---|---|---|---|---|---|… | ||
| scan0038 | Arguing for the continued use of cadmium plating on axle springs to prevent corrosion-related failures. | ||
| View original record | [REDACTED] [REDACTED] c. Rm. BY.9/G.11.1.37. 1306 AXLE SPRINGS - RE: CADMIUM PLATING. ------------------------------------- There is no question but that when originally I cleared road spring… | ||
| scan0039 | Modifications to the front spring bracket for the rear road springs on the Continental Phantom III. | ||
| View original record | 1306 To BY. Copy to Dr. Rm. R.H.C. HPS. Rm/Les. Les - what about the last suggestion Rm Front Spring Bracket for Rear Road Springs: Continental Phantom III. Since issuing to you LeC.5450 with our… | ||
| scan0040 | Modifying the rear spring setup from a Phantom II type to a Phantom III type. | ||
| View original record | -2- It would be possible, no doubt, to change the Phantom II type clip to the Phantom III type and so gain approximately .2". Looking at this drawing one is inclined to feel that the proposal would… | ||
| scan0041 | Short internal memo from Rm/Les to Hy regarding attached information. | ||
| View original record | To Hy. from Rm/Les. 1306 Rm/Les.1/AP.11.6.37 Gry. has asked me to let you have the attached information. Rm/Les. | ||
| scan0042 | List of production road spring weights for various car models. | ||
| View original record | 11.6.37 PRODUCTION ROAD SPRING WEIGHTS. BENTLEY Weight. Front (750 lbs.) 20 lbs. Rear (950 lbs.) 40¼ lbs. 25/30. Front (800 lbs. low rating) 21¾ lbs. Rear (1150 lbs. low rating) 52 lbs. Ph.III. Rear.… | ||
| scan0043 | Engineering notes on load calculations for Bentley III Phoenix rubber bearings and suspension components. | ||
| View original record | Bentley III - Phoenix 1306 Rubber bearings ① Front end, Lower Triangle, inner brg. Max Journal load due to weight . 550 lb Braking 1100 lb 2 Directions at right angles combined load = 1230 lb End load… | ||
| scan0044 | Combining shock damper loads at right angles. | ||
| View original record | Possible shockdamper load in direction at right angles to these two loads, can be combined to give an absolute max. journal load probably will not affect result very much. | ||
| scan0045 | Blocking of front suspension vent plugs for Phantom III and Wraith chassis models. | ||
| View original record | 1306 HPS. from Rm/Les. Rm/Les18/R.18.6.37. Front Suspension Vent Plugs P.III and Wraith. Will you please note for purposes of chassis specifications that the vent plugs G.83678 have been blocked up on… | ||
| scan0046 | Complaint to the English Steel Corporation regarding incorrect poundage and etching on front wheel springs. | ||
| View original record | 1306 Kes File. c. to Mr.Parker. c. to Mr.Turner. H.T.A. c. to Mr.Leslie. EXP Re our complaint to the English Steel Corporation relating to the incorrect poundage and etching of the Front Wheel… | ||
| scan0047 | Proposal for an accurate load testing apparatus for coil springs. | ||
| View original record | RHC. c. to RHC/GC. 1306. Rm/Les.12/JH.15.9.37. TESTING COIL SPRINGS. Re your RHC/GC.1/DB.15.9.37. We should welcome the proposal to get an accurate load testing apparatus for coil springs. Some months… | ||
| scan0048 | Using mild steel for front suspension parts, comparing them to Packard and Bentley components. | ||
| View original record | By. from Rm. c. Da. c. Da/Ev. c. Rm/Les. 1306 also 2 of 6 Rm3/R.23.11.37. MILD STEEL FRONT SUSPENSION PARTS. With reference to Hyll/C.18.11.37., the reason we obtained quotations for Bentley front… | ||
| scan0049 | The collection of suspension data to reproduce the Packard spring rate on the Wraith model. | ||
| View original record | By. from Rm. c. to Da. c. to Da/Ev. c. to Mx. 1306. Rm.3/AP.7.1.38 S U S P E N S I O N Herewith various data collected from cars in the Expl. Dept. We are going to reproduce the Packard spring rate on… | ||
| scan0050 | Comparison of suspension spring and roll ratings for various vehicle models. | ||
| View original record | To Rm. Rm/Cm.4/AP.7.1.38 SPRING RATINGS. Spring Rating Total Weight Unsprung Weight. Initial Deflection. Front Rear Front Rear Front Rear Front Rear Packard. 79 110 825 1000 120 170 8.9" 7.55"… | ||
| scan0051 | Graph showing load versus deflection for the Wraith front wheel. | ||
| View original record | WRAITH FRONT WHEEL DEFLECTION INITIAL DEFLECTION 7.4" BUMP BUFFER RATING = 1750 LBS/IN REBOUND BUFFER RATING = 650 LBS/IN LOAD LBS DEFLECTION INCHES | ||
| scan0052 | Graph showing Oldsmobile front wheel deflection against load. | ||
| View original record | OLDSMOBILE FRONT WHEEL DEFLECTION INITIAL DEFLECTION 8.4" BUMP BUFFER RATING 750 LBS/IN REBOUND BUFFER RATING 800 LBS/IN LOAD LBS. DEFLECTION INCHES | ||
| scan0053 | Graph comparing the front wheel deflection curves of the B III model and a Packard vehicle under load. | ||
| View original record | COMPARISON OF B III & PACKARD FRONT WHEEL DEFLECTION CURVES TABLE: HEADER: PACKARD, B. III INITIAL DEFLECTION: 8.9", 4.7" BUMP BUFFER RATING: 730, 405 LBS/IN REBOUND BUFFER RATING: 500, 2000 LBS/IN… | ||
| scan0054 | High cost of road springs and proposing comparative testing against Packard and Austin springs. | ||
| View original record | S/W To EH. from Sg. Copy to Hs.Rm. Road Springs. Sg14/E19.1.38 Referring to your EY.5/G.10.1.38, whilst noting all that you say, I still do not understand why our springs should have to be so… | ||
| scan0055 | Specification memo regarding the 'Shore Durometer' hardness for rubber parts, including the Wraith front suspension buffer. | ||
| View original record | To By. from Rm/Les. ? 1306? Rm/Les.7/MH.25.1.38. SPECIFICATION FOR RUBBER PARTS. We have asked on several occasions that our detail drawings for rubber parts should state the "Shore Durometer"… | ||
| scan0056 | Examination of chassis road springs for decarburisation after bumper testing. | ||
| View original record | To BY. c. Rm. c. Da. H1/EJW.1/GS.3.2.38. LABORATORY. M.1,486. LES 1306 CHASSIS ROAD SPRINGS - DECARBURISATION. The following springs were handed to us by Rm/Les. at your request. Woodhead Spring No.24… | ||
| scan0057 | Analysis of spring plate materials, including hardness tests, chemical composition, and the effects of decarburisation. | ||
| View original record | -2- M.1,486/8 - Upper surface of small American spring plate, after removal of .002" depth of material. Note patchy distribution of ferrite at this level. These should be compared with :- M.1,486/9 -… | ||
| scan0058 | Hardness test results on American Spring material after various cyanide and heat treatments. | ||
| View original record | -3- With a furnace atmosphere of carbon monoxide or one which is approximately neutral, or again, by quenching direct from a cyanide bath, the endurance limit is maintained at ± 47 tons/sq.in. In… | ||
| scan0059 | The results of cyanide heat treatment and hardness testing on steel, including conclusions. | ||
| View original record | -4- After 15 mins. Cyanide treatment and. direct quenching from bath, Surface 504 "Core" 480 Surface +24 After 30 mins. Cyanide treatment and direct quenching from bath. Surface 519 "Core" 481 Surface… | ||
| scan0060 | Sketch showing the results of decarbonisation tests on various road springs. | ||
| View original record | SKETCH SHOWING DECARBURISATION LABORATORY. IN ROAD SPRINGS. 7. 12. 37 WOODHEAD SPRING N° 24 MAIN PLATE BROKEN THROUGH EYE AFTER 11 1/4 HOURS. .006" UPPER SURFACE. .004" TRANSVERSE SECTION NEGLIGIBLE… | ||
| scan0061 | Graph showing the effect of cyanide treatment on the decarburised surface of American Silico-Manganese road spring plates. | ||
| View original record | LABORATORY. EFFECT OF CYANIDE TREATMENT ON DECARBURISED SURFACE OF AMERICAN SILICO - MANGANESE ROAD SPRING PLATE. TESTS WITH 30 KG LOAD / 1 MM. BALL. BRINELL HARDNESS OF OUTER LAYER DEPTH BELOW… | ||
| scan0062 | Laboratory report detailing fractures in Silico-manganese road-spring main-plates following a bumper test. | ||
| View original record | ROLLS-ROYCE LABORATORY REPORT: M.1486/1. Spring No.1. x 2 M.1486/2. Spring No.2. x 2 Firths' Silico-manganese road-spring main-plates. Fractured on bumper test. Starting point of fracture in… | ||
| scan0063 | Laboratory report showing micrographs of the transverse sections of three different springs, noting the levels of decarburisation on their upper surfaces. | ||
| View original record | ROLLS-ROYCE LABORATORY REPORT: Transverse section of Woodhead's spring No.24. - partial decarburisation in region of upper surface. M.1486/3 x 250 Transverse section of Firth's spring No.1. - complete… | ||
| scan0064 | Laboratory report with two microphotographs comparing the surfaces of Woodhead's and Firth's springs. | ||
| View original record | ROLLS-ROYCE LABORATORY REPORT: M.1486/6 x 250 Upper surface of Woodhead's spring after removing .002" depth of material. M.1486/7 x 250 Upper surface of Firth's spring No.1. after removing .002" depth… | ||
| scan0065 | Laboratory report with photomicrographs comparing the surface structure of an American spring and a Firth's spring. | ||
| View original record | ROLLS-ROYCE LABORATORY REPORT: M.1486/8 x 250 Upper surface of American spring after removing .002" depth of material. M.1486/9 x 250 Firth's spring No.2. after removing the whole of the decarburised… | ||
| scan0066 | Front shock damper performance, oil displacement figures, and potential improvements for the Bentley III & 50 models. | ||
| View original record | LES what do you say to all this Rm To Da... From Da/DB. c.c. to By. c.c. to Rm. c.c. to Ev. c.c. to Rm/Les. 1306. Da/DB.20/N.15.2.38. Front Shockdampers - Bentley III & 50. One of the items discussed… | ||
| scan0067 | Page discussing the heating effect on oil in shock dampers, with reference to the B.III front damper and Phantom III. | ||
| View original record | -2- Da/DB.20/N.15.2.38 Cont'd. ------------------------- The most obvious drawback of a small volume displacement in a shockdamper is the heating effect on the oil. On the B.III front damper the… | ||
| scan0068 | Suggesting a change in material for anti-roll rods to achieve a cost saving of 2/2d per chassis. | ||
| View original record | To By. from Rm/Les. c. RHC. 1306 also 1260 Rm/Les.10/MH.14.3.38. MATERIAL OF ANTI-ROLL RODS. Ph.III F.88623 is S/CV. Wraith FW.873 is S/CV. Confirming this morning's conversation it is suggested that… | ||
| scan0069 | Scheme for an alternative front eye rear spring lubrication for Bentley 111 and 50 models. | ||
| View original record | c. Rm. DA.5/G.24.5.38. DFM 7306 BENTLEY 111 and 50. REAR SPRINGS. Please receive herewith the following scheme F.CD.685 Alternative Spring Lubrication front eye rear spring. The above scheme shews the… | ||
| scan0070 | Alternative spring lubrication design for the rear spring front eye of a Bentley III & 50. | ||
| View original record | F.C.D.685 THIS PORTION LEFT SOFT LEVEL TOP OF FRAME FSK635 FIRTHS DPT. No 250 THIS SCHEME IS SIMILAR TO F.C.D.642. EXCEPT FOR THE MODIFICATIONS TO THREADED BUSH & SPRING. THE OIL COIL WILL NOT BE… | ||
| scan0071 | Parts list and instructions for the spring suspension mechanism on Bentley 111 and 50 models. | ||
| View original record | 13do LPO. (struck through) c. Rm. C. Rm/AFM. (struck through) BENTLEY 111 and BENTLEY 50. SECTION 7042. SPRINGSUSPENSION MECHANISM. Please receive herewith two blueprints of each of the following :-… | ||
| scan0072 | Parts list and instructions for the Spring Suspension Mechanism of Bentley 111 and 50 models. | ||
| View original record | 1306 BY/Ald.10/G.14.6.38. c. Rm/AFM. BENTLEY 111 and BENTLEY 50. SECTION 7042. SPRING SUSPENSION MECHANISM. Please receive herewith two blueprints of each of the following :- S.CD.699 Stay for Lower… | ||
| scan0073 | Particulars for the front springs of the B.50 and Silver Wraith models. | ||
| View original record | 1306 c. Rm. DA.12/G.15.6.38. MARTINDALE FRONT SPRINGS B.50 and SILVER WRAITH. Herewith are particulars of the front springs for the above, with 8" static deflection and weights of 900, 950 and 1000… | ||
| scan0074 | Specification table for static deflection springs for the B.50 and 'Silver' Wraith models. | ||
| View original record | 8" Static Deflection Springs, B.50 and "Silver" Wraith. Normal sprung weight. 900 lbs. 950 lbs. 1000 lbs. Wire diameter. 0.645" 0.653" 0.660" Mean diameter of coils. 4.855" 4.847" 4.840" Number of… | ||
| scan0075 | Tasks related to shock damper testing and modification on various chassis. | ||
| View original record | 1306 To Rm/Clapham from Rm/AFM. &. Rm/Kennington. Rm/AFM.3/MH.22.6.38. Will you please:- (1) Measure the front shock damper poundage on 7.B.V. (2) Have 1.B.50's front dampers set similarly. (3) Start… | ||
| scan0076 | List of ten engineering tasks related to vehicle springs, chassis, and components. | ||
| View original record | 1306 To Kennington from Rm/AFM. c. Clapham. Rm/AFM.4/MH.22.6.38. Will you please:- (1) Determine all the constants concerning springs on 1.B.50, namely:- Weight on each wheel, unladen Buffer… | ||
| scan0077 | Design and fitting of a front anti-roll rod for Bentley 111, 3 and 50 models. | ||
| View original record | 1306 RY/NS. c. Rm. DA.4/G.30.6.38. A.F.M BENTLEY 111 and 50. FRONT ROLL ROD. Please receive herewith the following scheme F.CD.767 Anti-Roll Rod - Front. The above scheme shews a front roll rod fitted… | ||
| scan0078 | Scheme for a modified rear spring mounting for Bentley 3 and 50 models. | ||
| View original record | BE/MS. c. Rm. 1306 DA.4/G.9.7.38. AFM BENTLEY 3 and 50. REAR SPRINGS. Please receive herewith the following scheme :- F.CD.787 Modified Rear Spring Mounting. The above scheme shews top shield with a… | ||
| scan0079 | Scheme for a modification to the front anti-roll rod bearing for Bentley 111 and 50 models. | ||
| View original record | EX/MS 1306. c. Rm. ---------- DA.14/G.12.7.38. BENTLEY 111. and 50. --------------------- FRONT ANTI-ROLL ROD. -------------------- Please receive herewith the following scheme :- F.CD.794 Mod. to… | ||
| scan0080 | Blueprint showing modifications to the anti-roll rod bearings for models BIII & 50. | ||
| View original record | ¢ FRONT WHEELS F.C.D. 794 FOR ALL OTHER PARTICULARS SEE F.C.D. 767. 12 SWG (.104) BACKING PLATE ADDED, PROFILE TO FOLLOW THAT OF BEARING BRACKET. BOTTOM FLANGE OF FRAME DIFFERS SLIGHTLY FROM F.C.D.… | ||
| scan0081 | Notification of a reduction in taper pins for spring suspension brackets on B.111 and B.50 chassis. | ||
| View original record | FHH AFM DH/NS 130b c. Rm. DA.9/G.13.7.38. B.111 and B.50. CHASSIS. SPRING SUSPENSION BRACKETS. Please received herewith blueprints of G.CD.791 showing a reduced number of taper pins in the spring… | ||
| scan0082 | Order for 12 buffers from the Firestone Rubber Co. | ||
| View original record | 1306. To Roy. c. to Roy/Les. Rm/AFM.6/JH.23.8.38. Buffers GW.2042. Will you please order 12 more of the above buffers from the Firestone Rubber Co. only in 45 durometer. They are wanted for B.III and… | ||
| scan0083 | Scheme for a locating screw for threaded bushes on rear springs for Bentley 3, 50 and Wraith 80 models. | ||
| View original record | BT/MS. [Struck through] c. Rm. ------- 1306 DA.1/G.26.8.38. BENTLEY 3, 50 and WRAITH 80. REAR SPRINGS. A.R.M. Please receive herewith the following scheme :- F.CD.852 Locating screw for threaded… | ||
| scan0084 | Modified lower triangle thrust stay for the front suspension on Bentley 111. 50 and Wraith 80 models. | ||
| View original record | 1306 [Struck through text] c. Rm. DA.1/G.8.9.38. BENTLEY 111. 50 and WRAITH 80. LOWER TRIANGLE LEVERS - FRONT SUSPENSION. [Handwritten initials 'ATM'] Please receive herewith the following scheme :-… | ||
| scan0085 | Requesting modifications and new parts for the 'Wraith II' roll rods to reduce roll stiffness. | ||
| View original record | 1306 also 646 To By/Ald. from RM/AFM. c. HJS. c. By/HEB. c. DA. c. De/JD. c. RM/HYH. RM/AFM.7/WH.4.10.38. WRAITH II ROLL RODS. With the introduction of 8" deflection front springs a front roll rod is… | ||
| scan0086 | Proposal to modify the front suspension coil springs for the Wraith III and Phantom 111 models. | ||
| View original record | EW/NS c. Rm. c. ROY. c. RHC. DA.1/G.17.10.38. WRAITH 111 and PHANTOM 111. FRONT SUSPENSION COIL SPRINGS. Referring to the difficulty in obtaining supplies of the outer coil springs on the Wraith… | ||
| scan0087 | List of work and tests required for various suspension mechanism components. | ||
| View original record | 1306. To FWK. from Rm/AFM. Rm/AFM1/R.13.12.38. SUSPENSION MECHANISM. The following is a list of work with which you are concerned:- x Front Roll Rod Rubbers - Durability Tests. " " " 4" Carbon - do. x… | ||
| scan0088 | Internal memorandum regarding a 'bump' test on a spot-welded Front Cross Member Assembly. | ||
| View original record | To: BY & Rm. C. DR. [crossed out] C. HPS. [crossed out] From RHC/GTH. 1306 ~ 1010? RHC/GTH.1/MC.20.12.38. A.F. MARTINDALE FRONT CROSS MEMBER ASSEMBLY We are handing to the Experimental Department for… | ||
| scan0089 | Work to be undertaken on suspension and chassis components. | ||
| View original record | 1306, 1029, 1892. To Rm. from Rm/AFM. c. Rm/FWK. c. Rm/C1M. c. Rm/JBD. Rm/AFM.1/MR.5.1.39. The following work should be tackled in the next week or so:- B.V. Suspension - Kennington. Petrol tank… | ||
| scan0090 | Technical memo detailing work on suspension components and noise testing procedures. | ||
| View original record | -2- Rear Shock Damper Links. We are going to use 3 silentbloc links for 'A' series B.V. and are going to run these (once again) on the bump. We are also working on large Delco type rubbers and conical… | ||
| scan0091 | Component tests for noise, engine mounts, suspension, and other parts, including for the Wraith II model. | ||
| View original record | -3- Rm/AFM.1/MH.5.1.39. Contd. Noise Tests - Clapham. Mr. Wilks is insistent that complete removal of the centre body supports is essential to keep down noise and vibration, and certain phenomenon of… | ||
| scan0092 | Lubrication, shock damper tests, and design modifications for various car models. | ||
| View original record | -4- Lubrication. HPS/WB. is doing tests on the Tecalemit pump and Clapham should keep "au fait" with this work. Shock Dampers on 9.B.V. Should be altered to standard setting when the noise tests are… | ||
| scan0093 | Recommendations for shock damper settings, brakes, and servo systems for production. | ||
| View original record | -5- Contd. 29.G.VI Ride. We must arrive at a standard shock damper setting for 'C' Series: this is urgent. We cannot rely on new type (medium size) bellows because the small size may be ordered.… | ||
| scan0094 | The road spring characteristics and weights of experimental cars, including the 1.B.30 and Buick Century. | ||
| View original record | 1306 To Da. from Rm/FWK. c. to Da/Ev. c. to Da/DB. Rm/FWK.5/JH.1.3.39. ROAD SPRING DETAILS OF EXPERIMENTAL CARS. Below are the Road spring Characteristic and weights of the following cars as… | ||
| scan0095 | Specification sheet detailing vehicle spring rates, wheel movements, and loads. | ||
| View original record | -2- Rm/FWK.5/JH.1.3.39. Spring Rates. N.S.F. 130 lb/in. Δ = 6.4" U.L. 7.0" L. O.S.F. 130 lb/in. Δ = 7.45" U.L. 8.05" L. N.S.R. 160 lb/in. Δ = 5.6" U.L. 6.9" L. O.S.R. 165 lb/in. Δ = 5.7" U.L. 6.95" L.… | ||
| scan0096 | Suspension system data including unsprung weights, spring loads, rates, and wheel movements. | ||
| View original record | -3- Unsprung wt/front wheel 140 lb. Unsprung wt/rear wheel 205 lb. Loads on springs (Measured at wheel). 1 driver. + 4 passengers. O.S.F. 827 lb. 902 lb. N.S.F. 792 lb. 867 lb. O.S.R. 845 lb. 1060 lb.… | ||
| scan0097 | Specification sheet detailing loads on wheels and springs, along with spring rate data. | ||
| View original record | -4- Rm/FWK.5/JH.1.3.39. 2.B.50. Front springs. English Steel Open Coil FE.3947,8. Rear springs. Toledo Woodhead & interleaving. ..................... Loads on each wheel. + driver. + 4 passengers.… | ||
| scan0098 | Data sheet detailing wheel movements and spring loads for a Buick Century. | ||
| View original record | -5- Rm/F.K.5/JH.1.3.39. Front Wheel Movements. Choc Buffer cont. Laden. Unladen. Reb. Buffer Cont. Metal. Contact. N.S. 0 1/2" 3 1/8" 3 3/8" 4 5/8" 5 3/8" O.S. 0 1/2" 3 1/8" 3 3/8" 4 7/16" 5 9/16"… | ||
| scan0099 | Specification sheet detailing spring rates, roll ratings, and wheel movements. | ||
| View original record | -6- Rm/FWK.6/JH.1-3-39. Spring Rates. N.S.F. 110 lb/in. Δ = 8.35"U.L. 9.35"L. O.S.F. 102 lb/in. Δ = 9.45"U.L. 10.75"L. N.S.R. 146 lb/in. Δ = 5.35"U.L. 6.59"L. O.S.R. 148 lb/in. Δ = 5.35"U.L. 6.50"L.… | ||
| scan0100 | Request to perform a poundage test on a coil spring with theoretical deflection data. | ||
| View original record | 1306. To H1/GLT. from Rm/FWK. Rm/FWK.14/JH.2.3.39. COIL SPRINGS. Will you please poundage test the coil spring FB.3826, which you have received from us. The Theoretical poundages at different… | ||
| scan0101 | Progress report on measuring and reducing low-frequency suspension noise and vibration in Bentley cars. | ||
| View original record | W/ted Ex/found Caswell KENNINGTON CLAPHAM TONETE R.R. 306. ST. 74907/4/11/38. C.E. EXPERIMENTAL DEPARTMENT REPORT. noted CLM REFERENCE:— Lr/HWS/SGL.15/WJ.15.3.39. Subject of Report:— SUSPENSION NOISE… | ||
| scan0102 | Investigation into low frequency noise and vibration on Bentley cars with independent front wheel suspension. | ||
| View original record | SUSPENSION NOISE ON BENTLEY CARS. An investigation has been carried out on the low frequency noise and vibration present when Bentley cars with independent front wheel suspension travel over uneven… | ||
| scan0103 | Analysis of vibration and noise levels resulting from six different front suspension configurations on a Bentley. | ||
| View original record | - 2 - to this vibration, and partly to the drumming of body panels and chassis members caused by the initial shock transmitted to the body through the front suspension. It appeared therefore that the… | ||
| scan0104 | Report page detailing the conclusions and further investigation points from vehicle noise and vibration testing. | ||
| View original record | - 3 - different records, which is fairly satisfactory. The microphone results were less satisfactory since the instrument was insensitive to such low frequencies as 15 cycles/sec. The higher… | ||
| scan0105 | Vehicle noise levels, suggesting improvements for sound measurement and reduction. | ||
| View original record | - 4 - Engine noise at low speeds is below the level of the suspension noise and so would not cause any trouble. However wind noise is quite serious at 30 MPH. This might be reduced by wind deflector… | ||
| scan0106 | Graph showing windscreen vibration on a Bentley 1B50 due to front wheel impact under various conditions. | ||
| View original record | BENTLEY SUSPENSION VIBRATION OF WINDSCREEN OF BENTLEY 1B50 DUE TO IMPACT OF WEIGHT ON FRONT WHEEL VC+2 .02" 0 -.02" SUSPENSION NORMAL TORQUE ARM DISCONNECTED TORQUE ARM AND STEERING TUBES DISCONNECTED… | ||
| scan0107 | Blueprint graph comparing windscreen vibrations on Bentley cars due to front wheel impact under different suspension configurations. | ||
| View original record | BENTLEY SUSPENSION VIBRATION OF WINDSCREEN OF BENTLEYS 1.B.50 AND B 56 BN DUE TO IMPACT OF WEIGHT ON FRONT WHEEL VC H 4 +.02" 0 -.02" 1. B. 50 NO RUBBER UNDER YOKE +.02" 0 -.02" 1. B. 50 RUBBER… | ||
| scan0108 | Cross steering lever for model B.V. with increased tyre clearance and caster. | ||
| View original record | 13064 450 Da... from Da/DB. c. Ev. Rm. c. Rm/FJH. Da/JD. Da/DB.6/N.22.3.39. Cross Steering Lever B.V. Increased Tyre Clearance and 3/4° Caster. --------------------------------- PD.395, attached to… | ||
| scan0109 | Analysis of the front suspension spring rates for the B.V and B.50 models, investigating discrepancies. | ||
| View original record | Da. from Da/DB. (crossed out) c. BY Rm. Rm/AEM. (crossed out) c. Da/SV. and Da/JD. (crossed out) 1306. Da/DB.10/G.30.3.39. FRONT SUSPENSION SPRING RATE. B.V and B.50. Fairly wide differences have been… | ||
| scan0110 | Analysis of suspension linkage forces, spring rates, and the bending effects of coil springs. | ||
| View original record | - 2 - end of the upper triangle lever. Figs. 1 and 2 on Sheet 2 of PD.404 demonstrate why there is alteration of rate from the "leverage squared" figure; Fig. 1 is the triangle of forces for the full… | ||
| scan0111 | Calculations for coil spring ratings and wheel ratings, with notes on rubber bush deterioration. | ||
| View original record | - 3 - Da/DB.10/G.30.3.39. (3) cont'd. = (Coil spring rating x .323) + 23 lbs/in. or Rating of required coil spring = (Rating at wheel - 23 lbs./in.) / .323 For B.50, we have Rating at wheel = (Coil… | ||
| scan0112 | Blueprint graph comparing measured versus calculated spring rates for a front suspension system. | ||
| View original record | BI - 8.30 FRONT SUSPENSION. ACTUAL SPRING RATE AT WHEEL = SPRING RATE AT SPRING x (LEVERAGE SQUARED) BED. FIGURE IS 0.93 x (SPRING RATE AT SPRING / LEVERAGE SQUARED) TO TRACE THE SILENTBLOC RATING… | ||
| scan0113 | Request to investigate the cause of failure for three broken main leaves from a Bentley Bumper Chassis's rear road springs. | ||
| View original record | 1306 + 102H To H1/EJW. from Rm/FWK. Rm/FWK.8/JH.31.3.39. Bentley Bumper Chassis. We have submitted to you three broken main leaves from the rear road springs of the above chassis. They have all been… | ||
| scan0114 | Spring failures and requesting an analysis of stress on the top leaf. | ||
| View original record | 1306. Rm/FWK. from Rm. Rm5/R.13.5.39. Your note re spring failures is interesting. We should like to know whether the shackle angle has any effect on the stress in the top leaf, and if not, whether… | ||
| scan0115 | Front suspension rationalised programme and modifications to yoke pieces and stub axles. | ||
| View original record | 1306 + 1375 To Rm.... from Ev. c. By. c. Da. c. Rm/AFM. c. Rm/FJH. c. Da/JD. Handwritten notes: F.J.H. Are the pieces for exp test instructed Rm? exp detail Being Alt. AH Re: Front Suspension… | ||
| scan0116 | Request to design softer front springs with associated weight and load calculations for models W.80 and B.80. | ||
| View original record | 1306 JOHH 666 To Da/DB. from Rm/AFM. c. By/HEB. Rm/AFM.1/MH.10.6.39. SOFTER FRONT SPRINGS - W.80 & B.80. Will you please design springs of 8 1/2" effective deflection for W.80 and B.80, when laden.… | ||
| scan0117 | Requesting that springs are detailed when drawn and one pair for each type is ordered. | ||
| View original record | -2- Rm/AFM.1/MH.16.6.39. Will By/HEB. see that the springs are detailed when drawn and that one pair for each type is ordered as quickly as possible. Rm/AFM. | ||
| scan0118 | Confidential memo requesting recommendations for body and springing on Bentley V chassis for the Paris and Earls Court Motor Shows. | ||
| View original record | CONFIDENTIAL. 1306 [Handwritten] Rm [Struck through] [Handwritten] AFM Please write necessary note [Initialed] Rm D/BP3/MW.24.6.39 Re: Bentley V Chassis for Paris and Earls Court Motor Show. We are… | ||
| scan0119 | Request for recommendations on the springing for Bentley V Chassis show cars with Corniche bodies for the Paris and Earls Court Motor Shows. | ||
| View original record | 1306 Rm. D/BP9/MW.29.6.39. Re: Bentley V Chassis for Paris and Earls Court Motor Show. Can you please now let us have your recommendations for springing of the Show cars for the Corniche Bodies, as… | ||
| scan0120 | Spring deflection specifications for Bentley V models for the Paris & Earl's Court shows. | ||
| View original record | 1306 To D/BP. from Rm/AFM. c. By/NS. c. By/HEB. Rm/AFM.1/WH.1.7.39. BENTLEY V PARIS & EARL'S COURT SHOW. Confirming our verbal remarks, all cars built within the next 3 weeks or so will have 1,000 lb.… | ||
| scan0121 | Advising the adoption of coil springs over leaf springs in future suspension designs. | ||
| View original record | 1306 To Da/Ev. from Rm/AFM. c. Da/DB. c. Les. Rm/AFM.15/MH.3.7.39. COIL SPRINGS - SUSPENSION. Owing to the vastly superior life of coil over leaf springs the Americans are adopting "black bar" springs… | ||
| scan0122 | The performance and alternatives for interleaving materials in vehicle suspension. | ||
| View original record | 1366 d 1305 To Ev. from Clm. c. to Bastow. Rm/Clm.2/JH.22.1.40. Report on Interleaving. The first type of interleaving to which we were introduced was wax impregnated cardboard about 1/8" thick, which… | ||
| scan0123 | List of three new types of interleaving material currently on order. | ||
| View original record | -2- Rm/Clm.2/JH.22.1.40. (c) We have on order three new types of interleaving - 1. Spaldite with reinforced tips of Tufnol as decided upon when Mr. Spittlehouse came over from Woodhead. 2. Graphite… | ||
| scan0124 | Sketch of a rear suspension system. | ||
| View original record | 1306. FILE UNDER REAR SUS. | ||
| scan0125 | Letter to Ferodo Ltd. requesting a quote for four sets of interleaving material with specific dimensions for springs. | ||
| View original record | 1306. Rm/C1m.21/JH. 24th. January, 1940. Messrs. Ferodo Ltd., Chapel-en-le-Frith. For the attention of Mr.Longley. Dear Sirs, We hear that our Mr. Martindale has written to you with regard to… | ||
| scan0126 | Scheme for an aluminium alloy die-cast torque arm for the front suspension of Senior Range models. | ||
| View original record | Space 1306. To Rm from Ev. SECRET. File Ev6/26.1.40. c. Ev/HH. ALUMINIUM ALLOY TORQUE ARM. FRONT SUSPENSION. SENIOR RANGE. We send herewith prints of the scheme for an aluminium alloy die cast torque… | ||
| scan0127 | Alteration note correcting the free length of a 'Spring - Sliding Piece' due to a drawing office error. | ||
| View original record | TO RM. 104/RG. File 1306. 30-1-40. B.I. SEC. 6040. RG. 118. SPRING - SLIDING PIECE. ALTERATION:- THE FREE LENGTH HAS BEEN ALTERED FROM .350 TO .575. REASON:- D.O. ERROR. | ||
| scan0128 | Transition in chassis road spring suppliers and the need for standardized documentation. | ||
| View original record | To HPS. c. to Sv. c. to HPS/HH. c. to EV/HH. Chassis Road Springs. We are at present, going through a transition period on the design of chassis road springs. Firth's have made our road springs in the… | ||
| scan0129 | Requesting instructions for a set of tin gaiters to be made for two springs. | ||
| View original record | 1306 + 1307 To HPS. c. HPS/RH. Rm/Clm.1/BA.2.2.40. Will you please instruct a set of tin gaiters to fit the two springs which we are to-day handing to Albert Ridge, together with a sample tin gaiter… | ||
| scan0130 | Minutes of a discussion on suspension development for the Senior and Junior range vehicles. | ||
| View original record | 1306 & 1305 To Rm. c. to E.✓ c. to Ev/Db. Rm/FJH.7/JH.5.2.40. Minutes of Suspension Development Discussion - Works 2.2.40. Present Rm. Ev/Db. Rm/FJH. Project for revised Senior Range Pivot. (1) Buick… | ||
| scan0131 | Request to produce drawings for low rating coil springs for a bent front pan. | ||
| View original record | 1306 To Ev. from Rm. Rm.3/MH.2.3.40. LOW RATING SPRINGS FOR BENT FRONT PAN. Will you please produce drawings for 8" deflection bent front pan coil springs of below 850 lbs. Clapham suggests the… | ||
| scan0132 | Low load and rating springs for the Senior Range bent front pan. | ||
| View original record | Raw/Clau 1306. File To Rm. from Ev/DB. e. to Ev/HH. Ev/DB.10/JH.12.3.40. Low Load and rating Springs for Bent Front Pan. Senior Range. Rm.3/MH.2.3.40. asks for springs of 8" static deflection and… | ||
| scan0133 | Table comparing various specifications for different normal spring loads. | ||
| View original record | Ev/DB.10/JH.12.3.40. Normal Spring load. 700 lb. 750 lbs. 800 lb. Wire diameter. 0.610" 0.619" 0.635 Mean diameter of coils. 5.285" 5.294" 5.310" Number of effective coils. 6½ 6¼ 6¼ Normal load. 1230… | ||
| scan0134 | Letter to Stainless Spinning Works requesting a progress update on an order for special spring plates. | ||
| View original record | Springs 1306 Rm/MHR3/ET 8th August 1940. Stainless Spinning Works, 182, Miller Street, Birmingham 6. For the attention of Mr. Blake. Dear Sirs, In your letter of 16th May 1940 you informed us that you… | ||
| scan0135 | Requesting the despatch of attached springs to Messrs. Rubery Owen & Co. for the fitting of tin gaiters. | ||
| View original record | To HC/FC. From Ra/Clm. Copy to Roy. 1306 Ra/Clm.12/ET.4.12.40. Will you please despatch the attached springs to Messrs. Rubery Owen & Co., Darlaston, Staffs. They are being sent at our expense for the… | ||
| scan0136 | Letter to Messrs. Rubery Owen & Co. requesting an estimate for the manufacture of tin gaiters for leaf springs. | ||
| View original record | 1306 5th December, 1940. Rm/Clm.11/ET. Messrs. Rubery Owen & Co., DARLASTON, Staffs. Dear Sirs, We wish to try tin gaiters on our leaf springs and we understand that you have had some experience in… | ||
| scan0137 | Letter to British Belting & Asbestos, Ltd. acknowledging receipt of 'Scandilex' Belting, confirming it is under test and requesting a further supply. | ||
| View original record | 1906 5th December, 1940. Rm/Clm.4/ET. BRITISH BELTING & ASBESTOS, Ltd., CLECKHEATON. Yorks. Ref. IND:SM/HBP. Dear Sirs, We were very glad to receive 4 yards of 1¼" wide "Scandilex" Belting, and we… | ||
| scan0138 | Request to place official orders for belting and rubber buffers with two suppliers. | ||
| View original record | 1306 To Roy. from Em/Clm. Copy to G/JWH. Rm/Clm.7/ET.5.12.40. Will you please send an official order to British Belting & Asbestos Ltd., Cleckheaton, Yorkshire, for 4 yards of 1 1/2" wide "Scandilex"… | ||
| scan0139 | Letter to the British Tyre & Rubber Co. regarding the moulding of rubber buffers. | ||
| View original record | 1306 5th December, 1940. Rm/Clm.5/ET. British Tyre & Rubber Co., BURTON-ON-TRENT. For the attention of Mr. Birkbeck. Dear Sirs, This is to confirm that you are going to try and mould some rubber… | ||
| scan0140 | Letter to Messrs. Rubery Owen & Co. chasing up a delivery of leaf springs and a request to fit them with tin gaiters. | ||
| View original record | 1306 1st January, 1941. Rm/Col.4/ET. Messrs. Rubery Owen & Co., DARLASTON, South Staffs. Dear Sirs, On 5th December last we sent you a pair of leaf springs and, at the same time we wrote asking if you… | ||
| scan0141 | Letter to Toledo Woodhead Springs Ltd. with specifications for four sample springs required for testing. | ||
| View original record | 1306 Rm/C1m8/BT. 21st January, 1941. Messrs. Toledo Woodhead Springs Ltd., Toledo Steel Works, S H E F F I E L D. Dear Sirs, We should be much obliged if you could make up for us four sample springs… | ||
| scan0142 | Letter concluding a request for the production of sample springs. | ||
| View original record | Rm/Clm8/ET.21.1.41 - 2. We hope we have given sufficient details, and that you will be able to make up some sample springs for us. We remain, Yours faithfully, | ||
| scan0143 | Inquiry to Spaulding Ltd. regarding the supply of thicker Spauldite strips for spring interleaving. | ||
| View original record | 1306 Rm/Clm.2/ET. 25th January, 1941. Messrs. SPAULDING Ltd., Gloucester Way, Clerkenwell, L O N D O N E.C. Dear Sirs, Have you any Spauldite thicker than your standard strips .030" thick? We should… | ||
| scan0144 | Request for the supply of two dozen bushes (No. 735) for spring shackle tests. | ||
| View original record | 1306 25th January, 1941. Rm/Clm.3/ET. Messrs. HOWARD GRAHAM Ltd., Tiddington Road, STRATFORD-on-AVON. Dear Sirs, Can you supply us with two dozen bushes No. 735? We require them for some spring… | ||
| scan0145 | Letter to Toledo Woodhead Springs Ltd. detailing specifications for spring eyes and clips. | ||
| View original record | 1306 Rm/Clm.1/ET. 25th January, 1941. Messrs. Toledo Woodhead Springs Ltd., Toledo Steel Works, SHEFFIELD 1. Your ref. HS/OW. Dear Sirs, We thank you for your letter of the 23rd instant, and have… | ||
| scan0146 | Letter to The Tempered Spring Co., Ltd. requesting samples of three proposed suspension springs from a blueprint. | ||
| View original record | Rm/Clm.5/ET. 14th March, 1941. The Tempered Spring Co., Ltd., Burton Weir Works, SHEFFIELD 4. Dear Sirs, We enclose herewith a blue print of three proposed suspension springs, of which we are anxious… | ||
| scan0147 | Letter to The Tempered Spring Co. Ltd. requesting the creation of material samples for parts RF.872 and RF.873. | ||
| View original record | 1306 Rm/Clm.2/ET. 30th March, 1941. The Tempered Spring Co. Ltd., Burton Weir Works, S H E F F I E L D 4. Your reference HS/DE. Dear Sirs, We thank you for your letter of the 27th instant and should… | ||
| scan0148 | Letter from The Tempered Spring Co. Ltd. regarding the nearest steel stock available for suspension springs to drawing R.G.2052. | ||
| View original record | ALL COMMUNICATIONS SHOULD BE ADDRESSED TO THE COMPANY AND NOT TO INDIVIDUALS File Suspension Clm 23F THE TEMPERED SPRING COMPANY LIMITED MANAGING DIRECTOR: S. J. YOUNG M.INST.C.E. TELEPHONE 21333… | ||
| scan0149 | Request to The British Tyre & Rubber Co. for rubber blocks of specific dimensions and hardness for testing purposes. | ||
| View original record | Rm/Clm.4/ET. 1st April, 1941. Suspension The British Tyre & Rubber Co., Derby Road, BURTON-on-TRENT. 1306 Attention of Mr. Birkbeck. Dear Sirs, We require some blocks of rubber 40/45 durometer… | ||
| scan0150 | Letter from British Tyre & Rubber Co. confirming the production and dispatch of rubber strips. | ||
| View original record | Suspension File. Clm 23E TELEPHONE: BURTON-ON-TRENT 2977 (2 LINES). TELEGRAMS: "BRITGOODS, BURTON-ON-TRENT." BRITISH TYRE & RUBBER Co. LTD. DIRECTORS: SIR WALROND SINCLAIR, K.B.E., (CHAIRMAN &… | ||
| scan0151 | Table detailing buffer and ground clearances, weights, and tyre sizes for various car models. | ||
| View original record | To: Rm from Rm/Clm. c. Rm/Wym. Rm/Clm. 1806 Rm/Clm.1/RH.24.7.41. Buffer & Ground Clearances. Car Buffer Clearances Front Rear Ground Clearance. Rear engine cross member. Weight Tyre Size 8 - B - V. |… | ||
| scan0152 | Letter from Samuel Fox & Company discussing the design of new car springs and inability to supply certain steel due to war conditions. | ||
| View original record | bar Suspension file 118 TELEPHONE: OUGHTIBRIDGE 40871 (5 LINES) ALL COMMUNICATIONS TO BE ADDRESSED TO THE COMPANY CODES: WESTERN UNION 5th EDITION. A.B.C. TELEGRAMS: FOX, DEEPCAR SAMUEL FOX & COMPANY… | ||
| scan0153 | Broken lower triangle lever, its suspected cause, and findings from crack testing other similar parts. | ||
| View original record | A/C Chassis Suspension To [REDACTED] from Rm/Wym. c. [REDACTED] c. Rm/FJH. 1306 Rm/Wym.11/OH.8.4.42. We herewith attach photographs of the broken lower triangle lever removed from 9.B.V. car after… | ||
| scan0154 | Photograph showing two fractured metal components, likely for a failure analysis. | ||
| View original record | ", | ||
| scan0155 | Photograph of a broken lower triangle lever from an accident. | ||
| View original record | - LOWER TRIANGLE LEVER - FB 3508 CHASSIS - 9 B.V. BROKEN IN ACCIDENT 5-3-42 TOTAL MILEAGE 45462 | ||
| scan0156 | Investigation into a broken lower triangle lever and subsequent crack testing of similar levers. | ||
| View original record | To Rm. from Rm/Wym. c. Ev. c. Rm/WJH. 1306 Rm/Wym.11/OH.8.4.42. We herewith attach photographs of the broken lower triangle lever removed from 9.B.V. car after having run 45462 miles. There does not… | ||
| scan0158 | Photograph of a lower triangle lever broken in an accident, with details on the part and vehicle. | ||
| View original record | — LOWER TRIANGLE LEVER — F.B. 3508 CHASSIS — 9. B.V. BROKEN IN ACCIDENT 5-3-42 TOTAL MILEAGE 45462 | ||
| scan0159 | Request for particulars about existing front and rear car springs before obtaining new ones. | ||
| View original record | CAR SPRINGS FILE 1306 To Rm/Wym from Rm/GB. Rm/GB.1/PB.3.2.43. Re. Rm/Wym.16/OH. 29.12.42. Before obtaining the new springs for this car we would like the following particulars, for both the existing… | ||
| scan0160 | Letter from Wilcot (Parent) Co., Ltd. regarding the supply and fitting of car spring covers. | ||
| View original record | FROM A3745 WILCOT (PARENT) CO., LTD. PATENTEES & MANUFACTURERS. TELEGRAMS: SPECIALIST Ph: No: FISHPONDS. Fishponds 119. 667 FISHPONDS ROAD. FISHPONDS, BRISTOL. THE MOTOR TRADE ASSOCIATION ALL FOREIGN… | ||
| scan0161 | Advertisement for Wefco Spring Covers for motor vehicles. | ||
| View original record | WEFCO SPRING COVER THE IDEAL COVER FOR MOTOR VEHICLES. The great feature of our Patent Spring Cover is the ingenious and perfect method of lacing. The Cover is made of leather throughout and will last… | ||
| scan0162 | Mr. Royce's negative opinion on 'Duco' Spring Gaiters. | ||
| View original record | R.R. 235 B (200 T) (S F. 674, 22-5-19) G. 2376 X3745 To C. from Bn. Copy to Hs. Bn8/W19919. RE "DUCO" SPRING GAITER. With reference to the attached letter and circular from Messrs. Brown Bros. Ltd.,… | ||
| scan0163 | Squeaking rear springs, discussing potential causes and the trial of leather gaiters. | ||
| View original record | X3Y45. To EH. from R. Copy to CJ. " " BN. " " EH. RE REAR SPRINGS. . R7/G17.11.19. ---------- X.2628. X.3745. ---------- I feel certain that you are mistaken with reference to the squeaking being due… | ||
| scan0164 | The cause of squeaking rear springs and the solution of using leather gaiters. | ||
| View original record | To Te-- from Bn. Copy to -- Ck. x 3745 Bn10/W21219. RE SQUEAKING OF REAR SPRINGS. I think you should obtain a set of leather gaiters for the rear springs in accordance with Mr. Royce's agreement given… | ||
| scan0165 | Letter to The Wilcot (parent) Co. Ltd. regarding the testing of their spring covers on an Experimental Car. | ||
| View original record | X.3445 E.F.C. EH2/LGE12119. 2nd. Dec. 1919. The Wilcot (parent) Co.Ltd., 667 Fishponds Road, Fishponds, Bristol. Dear Sirs, We wish to test a set of your spring covers on one of our Experimental Cars.… | ||
| scan0166 | Requesting an order be placed with Wilcot Co. Ltd. for fitting leather covers to a set of standard springs. | ||
| View original record | R R 235 a (200 T) (S F. 673. 22-5-19. G. 2376. X.3445. To Mr. Mills O.O. from Hs. CR Hs4/LG19.12.19. We wish to have a set of standard springs fitted with leather covers. We have been in communication… | ||
| scan0167 | Letter from WILCOT (PARENT) Co LTD regarding a set of springs and enclosing photos for preference on covering. | ||
| View original record | X 3745 WILCOT (PARENT) Co LTD. PATENTEES AND MANUFACTURERS 667 FISHPONDS ROAD FISHPONDS BRISTOL THE MOTOR TRADE ASSOCIATION ALL FOREIGN PATENTS APPLIED FOR TELEGRAMS - SPECIALIST FISHPONDS TELEPHONE… | ||
| scan0168 | Letter to Wilcot (Parent) Company regarding specifications for covering springs. | ||
| View original record | X3Y45 Copy Hs3/LG291219. C.R. 29th. Dec. 1919. Wilcot (Parent) Company, 667 Fishponds Road, Fishponds, Bristol. Dear Sirs, We prefer the springs to be covered as shown on No.1 Photograph. We have… | ||
| scan0169 | Confirming the receipt of a complete set of 'Rappa' spring gaiters for chassis 4.EX. | ||
| View original record | R.R. 235B (100 T) S.H. 89. 22-7-20) G. 2769 X 3445 From Wd/Ms. 24.6.20. X.3764. CHASSIS 4.EX. X.3745. Received 1 complete set of "Rappa" spring gaiters for 4.EX. | ||
| scan0170 | Requesting different brands of spring gaiters to be supplied for testing. | ||
| View original record | X3745 To HS from DA. DA9/CB12-8-20. Re Spring Gaiters. Perhaps you have come to some definite conclusions on the subject of some of the spring gaiters we have fitted, if so, this information would be… | ||
| scan0171 | And comparing various types of spring gaiters. | ||
| View original record | COPY. S/W. Mr Day. Aug 9th, 1920. Spring Gaiters. These continue to come along but today I have been shewn a type called the "Grasping" made by Brace, Windle Blythe & Co., of Walsall, which I consider… | ||
| scan0172 | Letter from Brace, Windle, Blyth & Co. Ltd. confirming an order for 'GREASPRING' GAITERS is ready for fitting. | ||
| View original record | X.3745 G.E.C. Brace, Windle, Blyth & Co. Ltd., WALSALL, 20th. August! 1920. Messrs. Rolls-Royce Ltd., Nightingale Rd., Derby. Dear Sirs, Your order for 1 set of "B.W.B. GREASPRING" GAITERS is now… | ||
| scan0173 | The sending and fitting of spring gaiters for car 49GB. | ||
| View original record | X3744s To HS from DA. Hs AUG 28 1920 RECEIVED DA8/CB27-8-20. Re Spring Gaiters. With reference to the set of spring gaiters from Messrs Brace, Windle, Blythe Ltd. we are sending them to you, but as… | ||
| scan0174 | Cause of squeaking leaf springs and potential remedies such as lubrication and inserting material between the plates. | ||
| View original record | To Hs. from R. Copy to CJ. " " PN. " " Da. " " EFC. " " By. " " EP. " " R.R. of America Inc. (For the attention of OY). X 3745 R5/G3.9.20. X.2628b. X.3483. X.3745. RE SQUEAKING OF SPRINGS. X.3981. As… | ||
| scan0175 | Methods to protect and lubricate car springs to reduce noise and friction. | ||
| View original record | S.E. 132(a) 100 T: (S.H. 159, 11-8-20) G. 2800 Contd. -2- R5/G3.9.20. of grease-proof tape, and over this fit the leather stocking lately suggested, or bind the spring neatly with cord, securely… | ||
| scan0176 | Inquiry for information on the experimental use of Wefco patent leather spring casings to prevent squeaking. | ||
| View original record | X.3745 C O P Y. Hs from BY. (text 'from BY.' is struck through) c. Da. (text 'c. Da.' is struck through) c. EFC. BY6-P21.9.20. X.3745 CHASSIS - FRONT & REAR SPRINGS. RE LEATHER COVERS FOR SPRINGS TO… | ||
| scan0177 | Extract discussing alternatives to ferodo interleaves for road springs, including binding with tape or using a dust-proof cell. | ||
| View original record | X.3745 Extract from R6/G10.9.20. X.3461. X.3483. X.2628. RE ROAD SPRINGS. x.3745. The only alternative to the ferodo interleaves appears to be the binding of the spring with oil absorbatn tape or… | ||
| scan0178 | Visit from a director of Hammond (Chelsea) Ltd. with samples of motorcar spring covers. | ||
| View original record | Da. from Wd. c. to Hs. c. to EP. c. to By. c. to Ms. Hs OCT 11 1920 X3745 RECEIVED Wd5/NJ11.10.20. Hammond(Chelsea)Ltd. Herewith I send you copy of a letter from this firm, dated 9th inst. You will… | ||
| scan0179 | Letter from Hammond Limited regarding a sample of a 'Lubri Gaiter' for test purposes and mentioning an order from H.R.H. Prince Henry. | ||
| View original record | 235 a (100 T) (S.F. 846. 6-8-19) G. 2460 C O P Y. LETTER RECEIVED FROM:- MESSRS. HAMMOND LIMITED, Carlyle Works, 59C. Park Walk, Chelsea. October 9th 1920. The Chief Buyer, Messrs. Rolls-Royce… | ||
| scan0180 | Use of leather gaiters, optional extras like the 'Mascot', and improvements for tool storage. | ||
| View original record | H.R. 885A (100 T) (S.H. 159. 11-8-20) G. 2800 X3745 To PN. from R. Cop to CJ. " " Hs. " " Da. " " By. X1027 X.3745. RE GAITERS (LEATHER FOR SPRINGS ETC.) -PN16/WL- 19.10.20. With reference to road… | ||
| scan0181 | Extract detailing new parts and modifications for an experimental car being prepared for the U.S.A. | ||
| View original record | X3745 H. from Hs. C. to CJ. C. to Sn. C. to Z. C. to Dr. C. to Wy. Extract from - Hs1/LG4.11.20. X.3919. EXPERIMENTAL CAR FOR U.S.A. X.3764n/b. We are fitting to 4.EX the following new parts:- X.3912.… | ||
| scan0182 | Fitting of Jeavons Spring Gaiters to an experimental car. | ||
| View original record | X.3745 To Mr Warwick from DA. DA6/CB10-12-20. We should like to fit a set of Jeavons Spring Gaiters to an experimental car. Would you please advise us what car they should go on, so that we may get… | ||
| scan0183 | Request for a report on the testing of 'Rappa' gaiters on an experimental car. | ||
| View original record | X3745 To Mr Warwick from DA. DA12/CB24-1-21. X3745 We had a visit from Messrs E. Harrison & Sons representative with reference to some "Rappa" gaiters which are being tested on an experimental car. If… | ||
| scan0184 | Query regarding the recommendation of an oil-tight spring gaiter, comparing grease-packed and oil-packed types. | ||
| View original record | Lesper S/W. X3745 Hn8/LH15.2.21. re Spring Gaiters. -------- We have been requested to suggest a spring gaiter that can be relied upon as being oil tight. In your experience with various types of… | ||
| scan0185 | 'Facile' spring gaiters made by a Mr. Bonson of Long Acre. | ||
| View original record | TO HS. FROM DA. X 3745 DA12/AH16.2.1921. RE SPRING GAITERS" There is a gaiter made by a Mr. Bonson of Long Acre, and called the "Facile", of which London are sending a specimen. It could, perhaps, be… | ||
| scan0186 | Sample set of Spring Gaiters received from Messrs. Hammond (Chelsea) Ltd for experiment 3745. | ||
| View original record | (100 T) (S.H. 798, 10-12-20) G. 2948 X3745 Hs. from O.O. Wd/Dn2/HP17221. 17th Feb.1921. We have received a sample set of Spring Gaiters from Messrs. Hammond (Chelsea) Ltd. for experiment 3745. We… | ||
| scan0187 | Instructions for fitting and maintaining the Hammond Lubri-Gaiter. | ||
| View original record | Our method of lacing the Hammond Lubri-Gaiter. SOAK THE FELT LINING WITH THIN LUBRICATING OIL BEFORE FITTING. To make this explanation as clear as possible, we refer to EDGE "A" by which we refer to… | ||
| scan0188 | Correspondence with Hammond (Chelsea) Ltd. | ||
| View original record | R. 235a (100 T) (S.H. 798, 10-12-20) G. 2948 Da. from Wd. c. to Hs. c. to EP. c. to By. c. to Ms. RECEIVED 5 APR 1921 x3745 Wd7/NJ5.4.21. Hammond (Chelsea)Ltd. Please refer to mine Wd5/NJ11.10.20.… | ||
| scan0189 | Copy of a letter from Hammond (Chelsea) Limited regarding a sample set of Gaiters and potential improvements. | ||
| View original record | R. 199 (250T) (SD676 19-7-17) MP 18086s COPY OF A LETTER RECEIVED FROM:- MESSRS. HAMMOND (Chelsea) LIMITED. CARLYLE WORKS, 59C PARK WALK, CHELSEA. April 2nd. 1921. The Chief Buyer, Messrs. Rolls Royce… | ||
| scan0190 | Attaching a letter from Wilcot Co. Ltd. regarding the price of grease for Wefco Gaiters. | ||
| View original record | By. Dr. Hs. PP. x3745 Wd/Ms5/FJ13.4.21. Re Wefco Gaiters. We attach hereto copy of letter we have received from Messrs.Wilcot (Parent) Co.Ltd. dated 12th inst. giving the price of grease used in… | ||
| scan0191 | Supplier's letter discussing grease for spring covers, pricing, and a recent customer job. | ||
| View original record | Copy of letter received from:- WILCOT (PARENT) CO.LIMITED, 68 & 69, Avenue Chambers, Southampton Row, London, W.C.1. Tuesday, 12th April, 1921. Messrs.Rolls-Royce Limited, Nightingale Road, DERBY.… | ||
| scan0192 | Inquiry regarding the testing status and unique oiling arrangement of Harrison's 'Rappa' Spring Gaiter. | ||
| View original record | R.R. 950s. (20 T) (S.H. 326. 31-1-21). Bm. 2/6/15. X3745 Bs17/KW4/5/21. S/W. Re - Harrison's "Rappa" Spring Gaiter. ------- We have been asked by Messrs E. Harrison & Sons whether you have concluded… | ||
| scan0193 | Status of sample gaiters, extra strong laces, and a lubricator filler from Hammond (Chelsea) Ltd. | ||
| View original record | R.R. 235a (500 T) (S.D. 408. 26-4-17.) Bm. 2/156/13. Da. from Wd. c. to Hs. X3745 Wd13/NJ9.5.21. X3745 Re Hammond (Chelsea) Ltd. Upon receipt of yours Dal/CB15.4.21, I wrote the above people stating… | ||
| scan0194 | Customer suggestions for improving oil-tightness of spring gaiters on chassis 21.FE. | ||
| View original record | X.3745 S/W. H1/TB/30.5.21. Hs x2565 x3745 Re. John P. Baron. Chassis 21.FE I attach copy of letter from this owner written on receipt of a previous letter of mine, of which I also attach a copy. Mr.… | ||
| scan0195 | Concerning a potential supplier, Mr. R. Latham, for Taniwha spring gaiters. | ||
| View original record | R.R. 235a (100 T) (S.H. 798, 10-12-20) G. 2948 X3745 Hs. from Wd. c. to Da. ~~c. to By.~~ ~~c. to EP.~~ ~~c. to Ms.~~ Wd5/NJ31.5.21. Taniwha Gaiters. We have a letter from Mr.R.Latham, 42, Old Broad… | ||
| scan0196 | Letter from Taniwha Gaiters regarding a set of spring gaiters for testing on an experimental car. | ||
| View original record | TELEPHONE: 6095 CITY TANIWHA GAITERS. PROPRIETOR: R LATHAM. WORKS: 235, Southwark Bridge Road, S.E. 1. 42, OLD BROAD STREET, LONDON, E.C. 2. PATENTS APPLIED FOR. SPECIAL PROCESS FLEXIBLE OILPROOF AND… | ||
| scan0197 | Quoting a letter from Ramsdens (Halifax) Ltd. regarding Jeavons Lubricating Spring Gaiters. | ||
| View original record | R.R. 235A (100 T) (S.H. 798. 10-12-20) G. 2947 X3745 Hr. from Wd. c. to Hs. c. to Ef. c. to Bv. JUN 30 1921 Wd6/NJ30.6.21. Ramsdens (Halifax) Ltd., Ulster Chambers, 168, Regent Street, W.1. Spring… | ||
| scan0198 | The performance of Ramsdens Spring Gaiters after 10,000 miles on a School Car. | ||
| View original record | R.R. 235B (50 T) S H 986, 19-2-21) G 3009 To Wd. from - Hr. c. to Hs. " " Ep. " " By. X3745 [Stamp: FO & T DEPT JUL 1921 RECEIVED] Hr1/H4.7.21. RAMSDENS - SPRING GAITERS. With reference to your… | ||
| scan0199 | Promotional leaflet with customer testimonials for the 'Quick Fit' gaiter. | ||
| View original record | Unsolicited Testimonials. L . . . . . . . . N. WALES. DEAR SIRS, I herewith enclose cheque for “QUICK FIT” Gaiters. A number of my friends are writing you for a set after seeing mine as they are such… | ||
| scan0200 | Advertisement for the 'QUICK FIT' Gaiter for motor car springs. | ||
| View original record | "QUICK FIT" GAITER. The Gaiter that never Gapes. IN placing before you our Patent "QUICK FIT" Gaiter, for Motor Car Springs, we would call your attention to the following distinguishing features which… | ||
| scan0201 | Attaching a letter and booklet regarding Gaiters from Messrs. Hammond (Chelsea) Limited. | ||
| View original record | R.R. 235a (50 T) (S H 956, 19-2-21) G 3000 X3745 HS. from O.O. Wd/Dnl/HP4721. 4th July. 1921. We attach copy of a letter received from Messrs. Hammond (Chelsea) Limited., also booklet regarding the… | ||
| scan0202 | Copy of a letter from Hammond (Chelsea) Limited regarding an account for 'Lubri' Gaiters and requesting feedback. | ||
| View original record | R.R. 235c (10 T.) (S.H. 988. 22/2/21.) Bm. 598878. COPY OF LETTER FROM:- HAMMOND (CHELSEA) LIMITED. PARK WALK, CHELSEA. LONDON.S.W. July 2nd 1921. Messrs. Rolls-Royce Limited., DERBY. Dear Sir, We… | ||
| scan0203 | Leaflet from gaiter makers Hammond (Chelsea) Limited regarding the scientific care of springs. | ||
| View original record | "Lubri" TRADE MARK. THE SCIENTIFIC CARE OF SPRINGS HAMMOND (CHELSEA) LIMITED Expert Gaiter Makers PARK WALK, CHELSEA, LONDON, s.w. | ||
| scan0204 | Leaflet advertising 'Lubri' Gaiters for the scientific care of springs, including a price list. | ||
| View original record | The Scientific Care of Springs VERY Motorist now recognizes the many great advantages to be obtained from springs well lubricated and protected. An account recently published of trials carried out by… | ||
| scan0205 | Product leaflet describing the 'Lubri' Gaiter, a protective and lubricating cover for car springs. | ||
| View original record | The Neat Finish register in the exact position, consequently the straps are never really as tight as they should be (Prov. Patent). As fitted to the rear spring of a Rolls Royce Car. As shown by our… | ||
| scan0206 | Description of the protecting cover and lock lacing for a spring gaiter. | ||
| View original record | The Protecting Cover that portion which rests upon the top of the spring, so forming a reservoir. Oil in this reservoir can only escape by saturating the felt through which it finds its way to the… | ||
| scan0207 | Description of a patented leather gaiter for lubricating and protecting a leaf spring. | ||
| View original record | The Perfect Fitting Into each edge of the cover is sewn a rust proof flexible wire. At intervals, holes in the leather, exposing a small portion of wire, are cut opposite to each other, thus forming a… | ||
| scan0208 | Advertisement for the 'Lubri' Gaiter, a cover for leaf springs. | ||
| View original record | The “Lubri” Gaiter (Model de luxe) (Provisional Patent Design Registered) A Necessary Investment Not an Expense Fill the Reservoir occasionally with oil. The Gaiter does the rest. Improves riding… | ||
| scan0209 | Complaint from a driver about a squeaking car fitted with Wefco Gaiters. | ||
| View original record | [REDACTED] C. to ES. Re Mr. F.T. Fisher I attach two copies of a complaint from the Driver of the above car. You will notice that this car is fitted with Wefco Gaiters. Will you please write direct to… | ||
| scan0210 | Permanent cure for squeaking thick leaf springs. | ||
| View original record | To BR. from R. c. to CJ. c. to Wor. c. to Hs. c. to EP. c. to Da. X3745 R5/G13.9.21. X. 2628 - RE SQUEAKING OF THICK LEAF SPRINGS. X. 3745 I am very pleased to hear that you have discovered that by… | ||
| scan0211 | Cure for squeaking thick leaf springs by radiusing the leaf edges. | ||
| View original record | Hs. from Br. c. to CJ. c. to R. X.3745 Br1/H30.9.21. RE SQUEAKING OF THICK LEAF SPRINGS. X.2628 X.3745 I have this morning received a copy of Hs2/LG28.9.21. concerning the above. I am interested to… | ||
| scan0212 | Tests investigating the squeaking of thick leaf springs and the effect of radiusing the leaf edges. | ||
| View original record | To R. from Hs. c. to CJ. c. to E. c. to Da. c. to BY. c. to EP. X3745 Hs2/LG6.10.21. SQUEAKING OF THICK LEAF SPRINGS. X3628 (struck through) X3745 The tests we have carried out radiusing the edges of… | ||
| scan0213 | Internal memorandum discussing customer satisfaction and design choices between thick and thin leaf springs for the 40/50 HP chassis. | ||
| View original record | To R. from Hs. c. to CJ. c. to Wor. c. to Rg. c. to PN. c. to Da. c. to E. c. to BY. c. to Hm. c. to EP. c. to EWT. for R.R. Inc. X3745 Hs4/LG7.10.21. X.2628 - SPRINGING OF 40/50 H.P. CHASSIS. X.3461.… | ||
| scan0214 | Customer complaints regarding vehicle springing and potential solutions. | ||
| View original record | Contd. -2- overcome his particular complaint it was necessary to fit rear shock absorbers of the single-stage type giving a constant friction of 60 to 65 lbs. We have had other cases of customers… | ||
| scan0215 | The issues and feedback related to fitting dampers and shock absorbers to customer cars. | ||
| View original record | -3- HS43LG7.10.21. necessary that the dampers can be applied to cars already in customers hands. Whenever we have fitted the present R-R Shock absorbers it has always been necessary to alter the… | ||
| scan0216 | Leaf spring design, comparing thin vs thick springs, lubrication, and friction issues. | ||
| View original record | Contd. -4- Hs4/LG7.10.21. ------------ be overcome with thin leaf springs. If we fit thin leaf springs and do not provide gaiters to lubricate them, we are going to get them rusted up solid and are… | ||
| scan0217 | Quoting a letter from supplier Ramsdens (Halifax) Ltd regarding Jeavons Lubricating Spring Gaiters. | ||
| View original record | S.(Sales) from Wd. c.to Hs. c.to EP. c.to Hm. c.to By. c.to D/BP. c.to Roy. c.to Ms. X3745 RECEIVED 1921 Wd2/NJ22.11.21. Ramsdens (Halifax) Ltd. Jeavons Lubricating Spring Gaiters. We are in receipt… | ||
| scan0218 | Recommending the 'blocked type' of Jeavons Lubricating Spring Gaiters to prevent water ingress. | ||
| View original record | X3745 Wd from EP. c. to O. c. to Hs. c. to H. c. to EY. c. to D/P. c. to Roy. c. to Emp. EP/Thn8/H29.11.21. Re. Jeavons Lubricating Spring Gaiters. ----------------------------- With reference to your… | ||
| scan0219 | Advertisement for Withers' Lubrigait Spring Gaiter. | ||
| View original record | X3745 Fit the "WITHERS'" LUBRIGAIT Spring Gaiter R.PATENT. 5263/21 and ensure Luxurious Travel on - Rough - - Roads - | ||
| scan0220 | Promotional brochure for 'Withers Lubrigait' patent spring gaiters, including product features and customer testimonials. | ||
| View original record | The "Withers Lubrigait" Spring Gaiter is the outcome of careful study of the problem of spring lubrication from every point of view, and embodies :— 1. A solid leather cover blocked to the shape of… | ||
| scan0221 | Brochure for 'Withers' Lubrigait Spring Gaiter', a product for protecting and lubricating car leaf springs. | ||
| View original record | The depreciation in value of a new Car generally amounts to at least 20 per cent during the first year of its life. After that it will be less, depending on the amount of use the Car gets and the… | ||
| scan0222 | Follow-up letter from Taniwha Gaiters regarding the trial of their product on an E2 car and proposing a new design. | ||
| View original record | TELEPHONE: 6095 CITY. TANIWHA GAITERS. PROPRIETOR: R LATHAM. WORKS: 235, Southwark Bridge Road, S.E. 1. 42, OLD BROAD STREET, LONDON, E.C. 2. PATENTS APPLIED FOR. SPECIAL PROCESS FLEXIBLE OILPROOF AND… | ||
| scan0223 | Promotional letter from Hammond (Chelsea) Limited for their 'Lubri' Spring Gaiter. | ||
| View original record | X3745 HAMMOND (CHELSEA) LIMITED. "Lubri" TRADE MARK. Park Walk, Chelsea, London. S.W. ______192_ RECEIVED STAMP: OCT 25 1921 Dear Sirs, An increasing number of Car Manufacturers are including Spring… | ||
| scan0224 | Booklet on the scientific care of vehicle springs from an expert gaiter maker. | ||
| View original record | "Lubri" TRADE MARK. x3745 THE SCIENTIFIC CARE OF SPRINGS HAMMOND (CHELSEA) LIMITED Expert Gaiter Makers PARK WALK, CHELSEA, LONDON, s.w. | ||
| scan0225 | Promotional leaflet and price list for 'Lubri' Gaiters for car springs. | ||
| View original record | The Scientific Care of Springs EVERY Motorist now recognizes the many great advantages to be obtained from springs well lubricated and protected. An account recently published of trials carried out by… | ||
| scan0226 | Promotional document for the 'Lubri' Gaiter, a protective leather cover for car springs. | ||
| View original record | The Neat Finish register in the exact position, consequently the straps are never really as tight as they should be (Prov. Patent). As fitted to the rear spring of a Rolls Royce Car. As shown by our… | ||
| scan0227 | Description of a protecting cover with an oil reservoir and a lock lacing system for a spring. | ||
| View original record | The Protecting Cover that portion which rests upon the top of the spring, so forming a reservoir. Oil in this reservoir can only escape by saturating the felt through which it finds its way to the… | ||
| scan0228 | Brochure page describing the features and benefits of a leather spring gaiter, focusing on its fitting and lubrication-retaining properties. | ||
| View original record | .The Perfect Fitting Into each edge of the cover is sewn a rust proof flexible wire. At intervals, holes in the leather, exposing a small portion of wire, are cut opposite to each other, thus forming… | ||
| scan0229 | Advertisement for 'The Lubri Gaiter' (Model de luxe) for car springs. | ||
| View original record | The “Lubri” Gaiter (Model de luxe) (Provisional Patent Design Registered) A Necessary Investment Not an Expense Fill the Reservoir occasionally with oil. Improves riding comfort Increases tyre mileage… | ||
| scan0230 | Fitting instructions for the new patent spring lubricator and gaiter. | ||
| View original record | X3745 FITTING INSTRUCTIONS FOR THE NEW PATENT SPRING LUBRICATOR AND GAITER. Manufactured Solely by J. WITHERS & SON LTD., WISEMORE STREET, WALSALL. Owing to the special design and simplicity of… | ||
| scan0231 | Letter from E. Harrison & Sons regarding the supply and testing of improved 'Rappa' Spring Gaiters. | ||
| View original record | X3745 RAPPA SPRING GAITER PAT. N° 153464 ESTABLISHED 1886. E. Harrison & Sons. GOVERNMENT CONTRACTORS. PLEASE ADDRESS ALL COMMUNICATIONS TO THE FIRM, QUOTING REFERENCE. HENRY HARRISON, PROPRIETOR.… | ||
| scan0232 | Springing complaints on post-war cars and the effectiveness of fitting Hartford Shock Absorbers. | ||
| View original record | To R. from Hs. c. to CJ. c. to E. c. to Da. c. to FN. c. to HY. c. to RP. c. to Hm. X3745 Hel/LGS.1.22. X.3923 X.3461 "HARTFORD" SHOCK ABSORBERS. X.4426 X.3745 The complaints of springing which we… | ||
| scan0233 | Continued report on the effectiveness of a 'Hartford' friction damper for a 40/50 HP car, including test data. | ||
| View original record | contd:- -2- Hsl/23.1.22. ************** is the best cure we know of for preventing a 40/50 H.P. car jaggering or dithering on the road when the brake is applied. The 4-stage shock absorber does not… | ||
| scan0234 | The re-use of gaiters on 40/50 springs and the added benefit of fitting Hartford type spring dampers. | ||
| View original record | X3745 BJ. from BY. c. Hs. c. EP. c. Hm. BY4-P22.7.22. SPRINGS 40/50. RE USE OF GAITERS. BJ2/H20722. Whilst we all agree gaiters are most desirable it is considered the full advantage of a constant and… | ||
| scan0235 | Comparing the cost of Goshawk Gaiters from two suppliers, 'Wefco' and 'Lubrigait'. | ||
| View original record | V3745 ROY8/FJ12-8-22. Hs. Following our conversation this morning, I have now looked up the tentative figures put forward by 'Wefco' and 'Lubrigait' for Goshawk Gaiters and find the 'Lubrigait'… | ||
| scan0236 | Standardization and pricing of Wefco Gaiters for the Goshawk model. | ||
| View original record | BY. Hs. Mn. V3745 ROY5/FJ18-8-22. WEFCO GAITERS FOR GOSHAWK. If we decide to standardise these and push their use, either by charging the public an extra per chassis, or including them in the cost of… | ||
| scan0237 | Letter from WILCOT (PARENT) Co LTD regarding a receipt for a returned spring. | ||
| View original record | WILCOT (PARENT) Co LTD PATENTEES AND MANUFACTURERS 667 FISHPONDS ROAD FISHPONDS BRISTOL LONDON OFFICES: 68 AVENUE CHAMBERS, SOUTHAMPTON ROW, W.C.1. PHONES MUSEUM, 6719 & 4128. Monday, 28th August,… | ||
| scan0238 | Suggestion from 'Wefco' to incorporate an 'Enots Greaser' into their spring gaiter. | ||
| View original record | By - from ROY. c. to Hs. X3745 ROY14/DB19.9.22. The "Wefco" people are suggesting incorporating the "Enots Greaser" in their spring gaiter when used on R.R.Chassis, and asked for our comments on the… | ||
| scan0239 | Covering memo for a completed standardisation sheet on gaiters for road springs. | ||
| View original record | To R. from Hs. c. to CJ. and BJ. c. to Wor. c. to BY. c. to Da. c. to Rg. c. to EP. c. to PN. c. to EWT. for R.R. Inc. X3745 Hs/LG23.9.22. X.3745 - GAITERS FOR ROAD SPRINGS. We attach copy of… | ||
| scan0240 | Standardisation of chassis parts - Gaiters for road springs. | ||
| View original record | R.R. 755 (5 H) (S.J.) 291. 12-10-21. G. 3087. COMPLETED 22.9.22. STANDARDISATION of CHASSIS PARTS. Description of Parts. GAITERS FOR ROAD SPRINGS. Origin. To improve springing. Experimental Test… | ||
| scan0241 | Cost increase per chassis for the standardisation of gaiters for road springs. | ||
| View original record | To Hs. from My/JW. My/JW/N1/139A/M19.8.22. STANDARDISATION OF CHASSIS PARTS. X.3745. GAITERS FOR ROAD SPRINGS. We return herewith copy of above standardisation sheet with cost filled in, in which it… | ||
| scan0242 | Instruction to supply one set of Wefco block type Gaiters for a 6.EX car, with an attached measurement form. | ||
| View original record | Ms. from Hs. X3745 Hgs3/LG25. 9.22. X3745 / X3035 Will you please instruct - 1 Set 2 Wefco block type Gaiters for 6.EX Car. We attach necessary measurement form. Hs. | ||
| scan0243 | Measurement form for Wefco patent spring covers for a Chassis 6EX. | ||
| View original record | MEASUREMENT FORM. WEFCO PATENT SPRING COVER [Diagram of a Semi-Elliptic Spring] Labels: SHACKLE, 4, 5, 2, 3, 1, SPRING CLIP, SPRING GUIDE, Semi-Elliptic Spring. [Diagram of a 3/4 Elliptic Spring]… | ||
| scan0244 | Query regarding the standardisation of Wefco lubricated gaiters for road springs on the 40/50 chassis. | ||
| View original record | V3745 FR Hs. EP/Thn3/H25.9.22. E3745. GAITERS FOR ROAD SPRINGS. With reference to your Hs/LG23.9.22, attaching Standardisation Sheet for the above for 40/50 chassis, is it definited settled that the… | ||
| scan0245 | To inform the Stores that a set of gaiters from the Wefco Gaiter Co. has been fitted to car 6.EX. | ||
| View original record | R.R. 385A (100 T) (S.H. 798, 10-12-20) G. 1947 X3745 Ms. O.O. from Hs. Hs1/LG30.9.22. X3745 X3923 Will you kindly inform the Stores that Mr. Coterell of the Wefco Gaiter Co. brought in a set of… | ||
| scan0246 | Letter from the Spanish representative, C. de Salamanca, recommending Messrs. Ramsdens to supply 'Jeavons' spring gaieters for all chassis. | ||
| View original record | La conducción de coches por nuestro personal es por cuenta y riesgo del cliente o solicitante. x3745 AUTOMÓVILES REPRESENTANTE GRAL EN ESPAÑA ROLLS-ROYCE C. DE SALAMANCA DIRECCIÓN TELEGRÁFICA SALAMAN… | ||
| scan0247 | Brief typed note regarding gaiters, marked with a received stamp. | ||
| View original record | Gaiters to go with this. RECEIVED HS DEC 7 1922 | ||
| scan0248 | ROY to Hs regarding a communication from BJ about Tyre Gaiters and associated samples. | ||
| View original record | X3745 Hs. from ROY. ROY13/MG6.12.22 Stamp: Hs RECEIVED DEC 7 1922 Attached is copy of a communication from BJ. re Tyre Gaiters, on which I should be glad if you will kindly let me have your views. In… | ||
| scan0249 | Comparing Wefco and Jeavons tyre gaiters and questioning the selection of Wefco. | ||
| View original record | To ROY. from BJ. BJ8/H4.12.22 Copy Tyre Gaiters Please let me know why Wefcos have been selected in place of Jeavons and what quotations the Works had before them when they selected the Wefco. Also,… | ||
| scan0250 | Comparing Wefco and Jeavons spring gaiters, detailing the reasons for standardising the Wefco model. | ||
| View original record | Roy. From Hs. X3745 Hs4/LG7.12.22. SPRING GAITERS. The reason Wefco Gaiters were chosen as standard was because in the opinion of the Expl: Dept., the Test Dept., and EY. they were the most… | ||
| scan0251 | Comparing Gaiters from two different suppliers, Jeavons and Wefco. | ||
| View original record | contd:- -2- We believe however, that the Jeavons people are now producing a Gaiter with concealed lacing. This will mean that there will be very little difference between the Wefco and the Jeavons… | ||
| scan0252 | Pricing and standardization of Wefco Spring Gaiters. | ||
| View original record | X3745 Hs. from ROY. ROY5/MG29.12.22 Wefco Spring Gaiters Arising out of your note Hs4/LG7.12.22, B.J. has asked if the respective prices of Wefco and Jeavon Gaiters were before you when suggesting… | ||
| scan0253 | Price and standardization of Spring Gaiters from Wefco and Jeavons. | ||
| View original record | Roy. from Hs. X3745 Hs2/LG3.1.23. SPRING GAITERS. With reference to your Roy5/MG29.12.22. We did not know the price of the Wefco and Jeavons Gaiters when we standardised the "Wefco". We understood… | ||
| scan0254 | Short typed memo from ROY to Hs. regarding spring gaiters. | ||
| View original record | X3745 Hs. from ROY. ROY2/MG5.1.23 SPRING GAITERS Thanks for your note of the 3rd re above, copy of which I have sent this day to BJ, and written him as attached. ROY. ENCLOSURE. ENCLOSURE No 759… | ||
| scan0255 | Pricing and sourcing of Wefco and Jeavon gaiters. | ||
| View original record | BJ. from ROY. ROY1/MG5.1.23 ------------ WEFCO GAITERS I have now had an opportunity of discussing with Hs. your query re above, and hand you, attached, copy of his note. As I think you understand, we… | ||
| scan0256 | Sample of a modified 'Jeavon' Gaiter from Ramsdens of Halifax, comparing it to the 'Wefco' product. | ||
| View original record | X3745 Hs. from ROY c to BY. ------------ ROY20/MG22.1.23 ------------ Ramsdens, of Halifax, makers of the "Jeavon" Gaiter, have now submitted a sample of their modified Gaiter fitted with loop lacing… | ||
| scan0257 | Comparing a sample 'Jeavons Gaiter' with the 'Wefco' gaiter, preferring one with lubricators to fit an 'Enots' grease-gun. | ||
| View original record | To Roy. from Hs. X/5745 Hs2/LG23.1.23. GAITERS FOR SPRINGS. With reference to the sample Jeavons Gaiter. We do not consider this method of lacing is as neat or as effective as the 'Wefco'. We are also… | ||
| scan0258 | Correspondence regarding a design issue with the Jeavon Gaiter Charger and its lubricator registration. | ||
| View original record | X3745 Hs. from ROY. You will recollect you reported that the Jeavon Gaiter Charger had no means of registering in the Lubricator. Messrs. Ramsdens, of Halifax, the makers of this Gaiter write this… | ||
| scan0259 | From Roy requesting an opinion on the Jeavons Gaiter. | ||
| View original record | Hs. from ROY. X3745 ROY3/MG13.3.23 Are you now in a position to express an opinion on the Jeavons Gaiter ? ROY. [Signature: Roy] [Stamp: RECEIVED] | ||
| scan0260 | Instruction memo to Mr. Hives regarding the performance comparison of fitted gaiters. | ||
| View original record | RR 26 (10H BkS) (SK 165 6-10-22) MP 260738 x3745 ROLLS-ROYCE LTD. INSTRUCTIONS To Mr. Hives 15-5-1923 Order No. Customer's No. Re attached memo ROY9/MG 13.4.23. These gaiters were fitted to 69.II &… | ||
| scan0261 | Update on a test report for a sample set of Gaiters from Messrs. Ramsden. | ||
| View original record | TMW X3745 Hs. from ROY. ----------- ROY9/MG13.4.23 ------------- Messrs. Ramsden of Halifax are asking if we can give them any report yet on the sample set of Gaiters they supplied recently for test… | ||
| scan0262 | Request for a precis on the testing, adoption, and price of gaiters for 40/50 HP and 20 HP models. | ||
| View original record | X3745 To HOY. from BJ. Copy to Hs. BJ5/H16.5.23. Gaiters 40/50 H.P. and 20 H.P. On the 21st February last, in ROY3/MG21.2.23, you mentioned that some gaiters had been forwarded to you for testing,… | ||
| scan0263 | The testing of Jeavons Spring Gaiters as an alternative to those from Wefco Co. | ||
| View original record | X=745 To R. from Hs. c.c. to E. c.c. to CJ. c.c. to Da. c.c. to BY. Hs2/LG16.5.23. SPRING GAITERS. We have been testing Jeavons Spring Gaiters as an alternative to those supplied by the Wefco Co.… | ||
| scan0264 | Letter proposing a new design for a spring gaiter and outlining its features and advantages. | ||
| View original record | 28 Westholm, Addison Way, London, N.W.11. May 18th. 1923. E. W. Hives, Esq., The Experimental Dep't, Messrs: Rolls-Royce, Ld., Derby. Dear Sir: Some considerable time ago, I had the pleasure of… | ||
| scan0265 | Letter to E.W. Bonson regarding the examination and return of a sample gaiter. | ||
| View original record | Y3745 Hs1/LG. 23rd. May 1923. E.W. Bonson, Esq., 28 Westholm, Addison Way, London, N.W.11. Dear Sir, Referring to your letter of the 18th.inst. We have received the sample gaiter and have examined the… | ||
| scan0266 | The handling of a Spring Gaiter wooden model received for examination. | ||
| View original record | X3745 BP. from Hs. c. to Chat. Hs8/LG23.5.23. We are sending into the Stores - 1 Spring Gaiter. (wooden model) This Gaiter has been sent to us for examination from Mr. E.W.Bonson, 28 Westholm, Addison… | ||
| scan0267 | Standardisation sheet for Jeavons spring gaiters as an alternative to Wefco. | ||
| View original record | V3745 Hs. BY16-P4.6.23. SPRING GAITERS. Referring to R3/M28523, we take it that you will now put in hand a standardisation sheet and have it signed up for the use of the Jeavons gaiters as an… | ||
| scan0268 | Personal letter discussing the standardisation and comparison of different types of Jeavons gaiters. | ||
| View original record | X3745 ROLLS-ROYCE OF AMERICA, INC SPRINGFIELD, MASS. Oy3-W-62323 June 23, 1923. PERSONAL To: Mr. Hives From: Mr. Olley Jeavons Gaiters Have received proposed standardisation of Jeavons gaiters. I have… | ||
| scan0269 | Merits of different packing and lubrication methods for gaiters. | ||
| View original record | -2- Oy3-W-62323 2. Packing (continued) the felt or fabric packing we find to give excellent results. A further advantage of a packed wick of some sort is that it makes it unnecessary to produce a seal… | ||
| scan0270 | Letter from Ramsdens (Halifax) Limited confirming a meeting appointment with W. Hives. | ||
| View original record | THE SOCIETY OF MOTOR MANUFACTURERS & TRADERS RAMSDENS (Halifax) LIMITED, AUTOMOBILE EQUIPMENT & LEATHER GOODS MANUFACTURERS MANUFACTURERS OF JEAVONS LUBRICATING SPRING GAITER TRADE MARK HEAD OFFICE:… | ||
| scan0271 | Standardisation document for Jeavons Gaiters for road springs on 20 HP and 40/50 HP chassis. | ||
| View original record | R.R. 755 (5 H) (S.J. 291, 12-10-21) G. 3087. 13745 COMPLETED 30.6.23. STANDARDISATION of CHASSIS PARTS. Description of Parts. JEVONS GAITERS FOR ROAD SPRINGS. 20 HP. and 40/50 HP. CHASSIS. Origin. As… | ||
| scan0272 | Telephone message transcript regarding a proposal from Lighto Spring Gaiter Co. to fit their spring gaiters. | ||
| View original record | X3745 Telephone message received from :- The Lighto Spring Gaiter Co., Cross Hills Mills, HALIFAX. 1-40 p.m. 27-7-23. Wd. c. to HS. D/Sn5/CB27-7-23. These people would like to send to us a set of… | ||
| scan0273 | Requesting an opinion on 'LUBRIGAIT' Spring Gaiters, offered at a lower price than the standardised 'Wefco' and 'Jeavons' models. | ||
| View original record | Hs. from ROY. X3745 ROY12/MG14.5.24. You will recollect some months back we had sample Gaiters made by Withers, of Walsall known as "LUBRIGAIT". Later it was decided to standardise the "Wefco", and… | ||
| scan0274 | Memo inquiring about the price and requirement for 'Wijro' Saiten with oilskin linings for the 20 HP model. | ||
| View original record | [Crossed out text] Hives X3745 (Imp) 24/5/24 [Stamp: RECEIVED 26 MAY 1924] Re "Wijro" Saiten with Oilskin Linings Kindly inform us if you require these from us & what pricing for the 20 HP or 4gns. We… | ||
| scan0275 | Instructions for fitting leather gaiters to springs using lanoline and tape instead of Enots lubricators for Phantom and 20-HP chassis. | ||
| View original record | To Gov. C. XM. C. C/M/C C. V/D C. E.T.Dept. C. RE C. Hs. X3745 BY/HEB/M.10.11.28. PHANTOM AND 20-HP. CHASSIS. RE FITTING LEATHER GAITERS TO FRONT AND REAR SPRINGS, WITHOUT ENOTS LUBRICATION. In… | ||
| scan0276 | Cancelling drawing F.79794 and confirming the continued use of Enots lubricators on springs for Phantom & 20-HP chassis. | ||
| View original record | X3745 To Roy. C. [Redacted] C. [Redacted] C. [Redacted] C. [Redacted] C. [Redacted] C. Eff: Dept. C. [Redacted] C. [Redacted] C. Hs. BY/HEB10/M.12.11.28. PHANTOM & 20-HP. CHASSIS. RE CONTINUING TO FIT… | ||
| scan0277 | Instructions for an experiment on spring lubrication using felt pieces inside a gaiter and lubricator-fed copper pipes. | ||
| View original record | W. Bell. from Hs/Rn. X3745 Hs/Rn/LG21.11.28. TESTS ON SPRING LUBRICATION. X8410 Take a road spring end gaiter and cut out pieces of felt to fit inside the gaiter. (1) At the sides of the spring. (2)… | ||
| scan0278 | Experiments into spring lubrication and the interim use of felt in spring gaiters. | ||
| View original record | X3745 To Wor. from Hs/Rn. c. to Mx. c. to BY. Hs/Rn2/LG21.11.28. RE. SPRING LUBRICATION. X8410 With reference to Mrx9/T15.11.28. and in view of the interesting results obtained on spring lubrication.… | ||
| scan0279 | The practicality of using zip fasteners on leather gaiters for joints. | ||
| View original record | W/S. Bt. from Hs. Y3745 Hs3/LG27.2.29. LEATHER GAITERS. With reference to Btl/LH26.2.29. attached. It would not be a practical scheme to put Zip fasteners on to our leather joints. The Zip fastener… | ||
| scan0280 | Modifications and lubrication improvements for Phantom spring gaiters. | ||
| View original record | SG. OY. Hs. from R. X3745 R4/M2.3.29. PHANTOM - RE. SPRING GAITERS. X.7410 X.3745 X.3806 I have not sufficient practical experience to say much about Mr. axy Olley's suggested modification to the… | ||
| scan0281 | Issues with spring gaiters on the 20 HP chassis, lubrication problems, and proposed solutions. | ||
| View original record | X3745 To R. from Hs/Gy. c. to Sg. Wor. c. to E. DA. c. to SY. Hs/Gy1/LG28.5.29. SPRING GAITERS. X5410 The fact of lowering the 20 HP. chassis 1/2" has brought us back to a previous trouble we have had… | ||
| scan0282 | The correct method for lubricating spring gaiters using oil-soaked felt. | ||
| View original record | Hs. c. Mx. X.3745 BY4/G.4.6.29. SPRING GAITERS. ----------- Referring to Hs/Gyl/LG.28.5.29. the method of lubrication which has been applied to all springs(and is still in force) for the last 12… | ||
| scan0283 | The deletion of aluminium covers for road spring anchorages following a mileage test. | ||
| View original record | X3745 E. from Hs/GWH. c. to BY. Hs/GWH.4/KT.26.1.33. Re. ALUMINIUM COVERS FOR ANCHORAGE OF ROAD SPRINGS. We deleted the aluminium covers at the rear of the front spring, and the front of the rear… | ||
| scan0284 | Proposal to replace leather steering joint gaiters with metal shields. | ||
| View original record | LID Y3415 To EY. from Da. Da.4/HP.10.11.33. c. for. E. Hs. HSY. See me B.4. Steering Joint Gaiters. HS As an alternative to the leather gaiters now used, it is proposed that we should use metal… | ||
| scan0285 | Replacement of leather stockings on steering joints with a new metal shield design. | ||
| View original record | x3705 To Sft. from E. E.3/HP.14.11.33. c. Sg. Wor. Hs. Hy. EP. re Leather Stockings on Steering Joints. Referring to the improved form of leather stocking you handed to me, suggested by somebody in… | ||
| scan0286 | Request to send an official order to Willcot (Parent) Co. Ltd. for a pair of leather spring gaiters. | ||
| View original record | 1307 To Roy/Ms. from Rm/PWK. c. to G/JWH. Rm/FWK.9/JH.24.2.39. SPRING GAITERS. Will you please send an official order to The Willcot (Parent) Co.Ltd., Fishponds, Bristol for a pair of leather spring… | ||
| scan0287 | Letter to a supplier regarding specifications for fitting leather spring gaiters. | ||
| View original record | 1307 EXPERIMENTAL DEPARTMENT. Rm/FWK.6/JH. 25th. February, 1939. Willcot (Parent) Co.Ltd., Fishponds. BRISTOL. For the attention of Mr. Cotterell. Spring Gaiters. Dear Sirs, In a day or two we shall… | ||
| scan0288 | Requesting instruction for a set of tin gaiters to be fitted to two springs. | ||
| View original record | To HPS. c. HPS/RH. 1304 .r 1305 Rm/Clm.1/BA.2.2.40. Will you please instruct a set of tin gaiters to fit the two springs which we are to-day handing to Albert Ridge, together with a sample tin gaiter… | ||
| scan0289 | Internal request to order 6 sheets of 26 gauge tinned iron for making gaiters. | ||
| View original record | 1307 To Les. c. to G/JWH. Rm/Clm.7/JH.10.2.40. Will you please order 6 sheets of 26 gauge tinned iron 3' x 2' These are required for making into gaiters. Rm/Clm. | ||
| scan0290 | Letter to Vauxhall Motors inquiring about the source of supply for pressed steel spring gaiters. | ||
| View original record | 1307) Rm/GB.1/ET. 5th November, 1940. A.C. STENHOUSE, Esq., Engineering Department, Vauxhall Motors Ltd., L U T O N. Beds. Dear Mr. Stenhouse, I am sorry I was unable to get round to see you again… | ||
| scan0291 | Letter to A.C. Stenhouse of Vauxhall Motors regarding trying Rubey Owen for gaiters. | ||
| View original record | 1307 Rm/GB.5/ET. 18th November, 1940. A.C. STENHOUSE, Esq., Engineering Department, Vauxhall Motors Ltd., L U T O N. Beds. Your ref. 289/ACS/BT. Dear Mr. Stenhouse, Thank you very much for your… | ||
| scan0292 | Official order for one set of rear spring gaiters for 'Myth' from Failsworth Hat Co. Ltd. | ||
| View original record | Car File 1307 To: Wym/Wtd. from Rm/GB. Copy to Wym. Rm/GB.1/HM. 15.3.44. Will you please send an official order to the Failsworth Hat Co. Ltd., Failsworth, Manchester for one set of rear spring… | ||