Rolls-Royce Archives
| Identifier | Entry | ||
| img001 | Standardisation of a paraffin waxed paper condenser, changing from .30mf to .23mf and adding a reinforced case bottom. | ||
| View original record | RR 785 (10M) (8459. 24-10-30) S/3185. ORIGINAL COMPLETED 26. 1. 32. STANDARDISATION of CHASSIS PARTS. Description of Parts. PARAFFIN WAXED PAPER CONDENSER OF .23 mf. CAPACITY INSTEAD OF .30 mf. AND… | ||
| img002 | Form for standardizing chassis parts, noting implementation schedule, costs, and departmental approvals. | ||
| View original record | STANDARDISATION of CHASSIS PARTS The number of the first chassis on which the new part will be fitted....... When available. Date when chassis will be handed to test....................... Cost of… | ||
| img003 | Standardisation of a chassis part, specifically the ballast resistance with a vitreous insulator. | ||
| View original record | RR 788 (10M) (8489. 24-10-30) 6/3188. ORIGINAL COMPLETED 28. 1. 32. STANDARDISATION of CHASSIS PARTS. Date 15.10.31 No. 7720 Drawing No. Part List Description of Parts. BALLAST RESISTANCE WITH… | ||
| img004 | Modification form for the standardisation of chassis parts, detailing costs and approvals for the 'O' Series. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS. 212 OSTT/120 Date 12.01.21 MODIFICATION The number of the first chassis on which the new part will be fitted................ 'O' Series. Date when chassis will be… | ||
| img005 | Standardisation of chassis parts report for rear hydraulic dampers. | ||
| View original record | RR 755 (10M) (6459. 24-10-30) 6/3155. ORIGINAL COMPLETED 23.1.32. STANDARDISATION of CHASSIS PARTS. Date 22.9.31. X No. 7520 Drawing LOP. NoF.83611. Part List Description of Parts. REAR HYDRAULIC… | ||
| img006 | Standardisation of chassis parts for the rear hydraulic damper. | ||
| View original record | ORIGINAL STANDARDISATION OF CHASSIS PARTS Description of part to be superseded. REAR HYDRAULIC DAMPER Origin. To overcome complete failure. Experimental Test Report. Road Test Report. [Central section… | ||
| img007 | Standardisation of chassis parts, replacing the large grease gun with the Enots Autolub Grease Gun No. 5A. | ||
| View original record | RR 768 (10H) (19120, 13-10-31) BM. 9/7588. 20/25 HP and P.II [STAMP] COMPLETED 5.2.32. STANDARDISATION of CHASSIS PARTS. Date 8. 1. 32 X No. X6898 Drawing No. X4400 Part List Description of Parts:… | ||
| img008 | Form for tracking the implementation of new standardized chassis parts. | ||
| View original record | STANDARDISATION of CHASSIS PARTS The number of the first chassis on which the new part WILL BE fitted.......... When existing parts have been used up. Date when chassis will be handed to test.... Cost… | ||
| img009 | Standardisation of chassis parts for a breather to the rear axle. | ||
| View original record | RR 785 (10M) (S459. 24-10-30) 6/3185. ORIGINAL COMPLETED 5. 2. 32. STANDARDISATION of CHASSIS PARTS. Date 25.9.31. X No. 7350. Drawing No. EX.5988. Part List Description of Parts. BREATHER TO REAR… | ||
| img010 | Standardization form for a chassis part alteration to reduce cankering of oil leads. | ||
| View original record | STANDARDISATION of CHASSIS PARTS REMARKS ON PART TO BE ALTERED DrgNo. Experimental Test Report No. To reduce cankering of oil leads. The number of the first chassis on which the new part will be… | ||
| img011 | Standardisation of chassis parts to replace the Lucas force feed oil can with Kay's No. 31 oil can. | ||
| View original record | RR 785 (10M) (19120, 13-10-31) ORIGINAL 20/25 HP and P.II. COMPLETED 16.2.32. STANDARDISATION of CHASSIS PARTS. Date 8. 1. 32 Description of Parts. Kay's No. 31. Oil Can. Drawing No. X3898 Origin. To… | ||
| img012 | Standardisation form for a new part to replace an old Lucas type 100. | ||
| View original record | STANDARDISATION SISS PARTS Description of Part Drawing: X C3388 Part No. To replace old Lucas type 100. Boiler Report Examined for Report The number of the first chassis on which the new part will be… | ||
| img013 | Standardisation proposal for a modified starter automatic switch, deleting the teazer carbon contacts. | ||
| View original record | RR 755 (10M) (8459. 24-10-30) 6/3165 ORIGINAL [stamp] COMPLETED 2. 3. 32 [stamp and handwritten] [Document has a large purple 'CANCELLED' stamp across the center] STANDARDISATION of CHASSIS PARTS Date… | ||
| img014 | Form for the standardisation of chassis parts, detailing costs, implementation schedule, and approvals. | ||
| View original record | STANDARDISATION of CHASSIS PARTS Object: To prevent springs from shifting on axle. Experimental Test Report: Used on X-38 for 28,000 miles successfully. With above design one broken spring bolt has… | ||
| img015 | Standardisation of chassis parts, specifically servo operating levers and ball bearing cams. | ||
| View original record | RR 755 (10M) (3-7-30) BM. 6/2579 ORIGINAL COMPLETED 4.4.32. STANDARDISATION of CHASSIS PARTS. Date 26.9.31 X No. 7370 Description of Parts. SERVO OPERATING LEVERS 35° & 45° BALL BEARING CAMS. Origin.… | ||
| img016 | Form for fitting a new part to a 'O' Series chassis, including costs and an approval table. | ||
| View original record | ORIGINAL STANDARDISATION CHASSIS PARTS CANCELLED The number of the first chassis on which the new part will be fitted........ 'O' Series. Date when chassis will be handed to test...................… | ||
| img017 | Standardisation of chassis parts, proposing a reversion to double-ended jaw spanners for car tool kits. | ||
| View original record | RR 789 (10M) (19120. 12-10-31) BM. 9/7968. 20/25HP and P.II COMPLETED 6. 4. 32. STAMPED: ORIGINAL STANDARDISATION of CHASSIS PARTS. Date: 6. 2. 32. X No. 7580 (5580 crossed out) Drawing No. Part List… | ||
| img018 | Standardisation of battery ignition distributor head, sparking points, and rotor blade. | ||
| View original record | RR 755 (10M) (19120. 13-10-31) BM. 3/7558. ORIGINAL Chassis No 21.3.32 STANDARDISATION of CHASSIS PARTS. Date 6. 4. 32 X No. 6120 Drawing No. Part List Description of Parts. Battery ignition distri.,… | ||
| img019 | Part standardisation form detailing chassis fitting information and associated costs. | ||
| View original record | STANDARDISATION of PARTS PARTS LIST Date 2. 6. 32 Drawing No. Part No. The number of the first chassis on which the new part will be fitted........ When available. Date when chassis will be handed to… | ||
| img020 | Standardisation of a concealed support for side spare wheel carriers for use with longer bonnets. | ||
| View original record | RR 785 (10M) (19120, 13-10-31) SM. 3/7585. COMPLETED 24.6.32 STANDARDISATION of CHASSIS PARTS. Date 12.4.32 X No. 7600 Drawing No. 3021 Part List Description of Parts. Concealed support for side spare… | ||
| img021 | Standardisation form detailing the first chassis fitment and associated costs for a new part. | ||
| View original record | STANDARDISATION SISS PARTS COMPLETED 28.8.42 The number of the first chassis on which the new part will be fitted........ 89 in N.2. series Date when chassis will be handed to… | ||
| img022 | Standardisation of chassis parts, specifically the clutch pedal with spring washer and collar. | ||
| View original record | RR 755 (10H) (30405. 21-4-32) BM. 3/8382/4. COMPLETED 13.9.32. STANDARDISATION of CHASSIS PARTS. Date 12.8.32 Description of Parts. CLUTCH PEDAL WITH SPRING WASHER AND COLLAR FITTED TO BEARING. X No.… | ||
| img023 | Standardisation form for a clutch judder damper with spring washer and collar. | ||
| View original record | S.S.C.T.C1198/CC1800 STANDARDISATION of CHASSIS PARTS. Date 12.8.32 Ref. No. X Description of Part CLUTCH JUDDER DAMPER WITH SPRING WASHER AND COLLAR FITTING TO CRANKSHAFT. Origin To prevent fretting… | ||
| img024 | Standardisation of side spare wheel carriers with steadying stays, replacing 5/16' bolts with 3/8' bolts. | ||
| View original record | RR 75B (10M) (19120, 13-10-31) BM. 3/7588. ORIGINAL COMPLETED 13.9.32 STANDARDISATION of CHASSIS PARTS. Date 12.8.32. X No. 7600 Drawing No. 3021 Part List Description of Parts. SIDE SPARE WHEEL… | ||
| img025 | Standardisation proposal for chassis parts to prevent distortion, which was subsequently cancelled. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS Ref. No. X 1800 Drawing(s) No. S.O. 3125 Description of proposed alteration with REASON FOR SAME AND STATE WHETHER FOR TRIAL PURPOSES OR FOR FUTURE PRODUCTION "SILVER… | ||
| img026 | Standardisation of chassis parts for the Lucas Horn under the front apron. | ||
| View original record | STANDARDISATION of CHASSIS PARTS. Description of Parts. LUCAS HORN UNDER FRONT APRON. Origin. Better road clearing results. Experimental Test Report. Good results obtained. Road Test Report. Run 6,000… | ||
| img027 | Form for the standardisation of a Clutch Hub Outer Thrust Washer. | ||
| View original record | ORIGINAL STANDARDISATION of SIZES & PARTS. S.212 Model X: X 1000.E Drawing No: O.M.A. Description of Part: Clutch Hub Outer Thrust Washer. Origin: Derby. Road Test Report: Result of testing to be… | ||
| img028 | Standardisation of a 5.25 C/R Cylinder Head to improve the continental chassis. | ||
| View original record | RR 756 (10M) (19120. 13-10-31) BM. 3/7556. ORIGINAL. COMPLETED 30.8.32. STANDARDISATION of CHASSIS PARTS. Date 9.6.32. Description of Parts. CYLINDER HEAD 5.25 C/R. X No. 7050 Origin. To improve… | ||
| img029 | Standardization of parts form detailing an improvement to a continental chassis. | ||
| View original record | STANDARDIZATION OF PARTS Ref. No. D.S.P./8.S. Works No. X 1050 Description of Parts Origin Reason for Report: To improve continental chassis. Experimental Report: If it is necessary to run on Test No.… | ||
| img030 | Standardisation of chassis parts for road wheels with two rows of spokes. | ||
| View original record | RR 75B (10M) (19120, 13-10-31) BM. 3/7588. COMPLETED 30.8.32. STANDARDISATION of CHASSIS PARTS. Date 9.6.32. Description of Parts. ROAD WHEELS WITH TWO ROWS OF SPOKES. X No. 7810. Drawing No. Part… | ||
| img031 | Standardisation form for a new chassis part, detailing fitting, costs, and approval signatures. | ||
| View original record | Mirrored text from reverse of page: COMPLETED 30.9.35 STANDARDISATION of CHASSIS PARTS Date: .32.9.35 Ref: X Part No. Drawing No. Letter Ref. Road Test Report Experimental Test Report. Description of… | ||
| img032 | Standardisation of a 5-1 cylinder head for a standard chassis to improve performance. | ||
| View original record | RR 788 (10H) (19120, 12-10-31) BM. 3/7568. COMPLETED 30.8.32. STANDARDISATION of CHASSIS PARTS. Description of Parts. 5 - 1 CYLINDER HEAD. STANDARD CHASSIS Origin. To improve performance. Experimental… | ||
| img033 | Standardisation form for a new oiling system part for the 'G' Series chassis. | ||
| View original record | STANDARDISATION & CHASSIS PARTS COMPLETED 03.9.32 Description of Part: OILING SYSTEM. NEW CHASSIS DRAWING NO. X 7070 Date: 2.9.32 Drawing No: X 7070 Part No: Origin: To improve performance.… | ||
| img034 | Standardisation of Lake & Elliott cast iron brake drums to improve braking. | ||
| View original record | RP 755 (10M) (18120, 13-10-31) BM. 3/750S. COMPLETED 24.9.32. ORIGINAL. STANDARDISATION of CHASSIS PARTS. Date 9.6.32. X No. 7360 (struck out) 4612 Drawing No. Part List Description of Parts: LAKE &… | ||
| img035 | Standardisation of Parts form regarding the testing of improved brake pumps on a 'D' Series chassis. | ||
| View original record | Header Text (mirrored): ORIGINAL S.R. 32. STANDARDISATION of 21559 PARTS LITTLE ROAD TROY IRON WORKS Form Fields: Drawing No.: X 1700 Reason for Test (mirrored text): Run 2,000 miles on XX-17 and… | ||
| img036 | Standardisation of Lodge Plugs type HD.3 for 5 & 5.25 compression ratio engines. | ||
| View original record | RR 755 (10M) (30405. 21-4-32) BM. S/5352/4. COMPLETED 30.9.32. STANDARDISATION OF CHASSIS PARTS. Date 12.8.32. X No. 4425 Drawing No. 7970 Part List Description of Parts: LODGE PLUGS TYPE HD.3 FOR 5.… | ||
| img037 | Standardisation form for Lodge Plug Type R.S.5 for 20 & 25 HP chassis motors. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS Description of Part: LODGE PLUG TYPE R.S.5. FOR 20 & 25 H.P. CHASSIS MOTOR. Drawing No: X Part No: Nil Object: To prevent fluttering on light load and Comp. Engine… | ||
| img038 | Standardisation of the instrument board and an improvement in its illumination. | ||
| View original record | RR 788 (10H) (19120, 13-10-31) BM. S/7568. Completed 14.10.32 STANDARDISATION of CHASSIS PARTS. Date 1.7.32 Description of Parts. INSTRUMENT BOARD IMPROVEMENT IN ILLUMINATION X No. 6141 Drawing No.… | ||
| img039 | Standardisation of chassis parts form detailing costs and a list of departmental approvals with dates. | ||
| View original record | STANDARDISATION of CHASSIS PARTS S.E. of 1st Oct./32 T. 3271 / 18.7.32 X Div Con Description of Part Drawing No. Part No. INSTRUMENT No. INITIATE Mr. Origin Final Complete Sales Experimental Test… | ||
| img040 | Standardisation of a spring fitted to the thermostat of radiator shutters. | ||
| View original record | RR 755 (10M) (19120. 13-10-31) BM. 3/7588. Completed 14.10.32. STANDARDISATION of CHASSIS PARTS. Date 11.8.32 No. 7250 / 3499 Description of Parts. SPRING FITTED TO THERMOSTAT OF RADIATOR SHUTTERS.… | ||
| img041 | Standardisation of chassis parts form detailing a change to the 0.2. Series. | ||
| View original record | ORIGINAL Completed 19.10.32. STANDARDISATION of CHASSIS PARTS Part to be Discontinued SCHEME WITH FITTING ATTACHMENT OF RAMAN TYPE SILENCER. Origin To obtain a definite closure of the exhaust down… | ||
| img042 | Standardisation of a rear axle with a 12 x 41 ratio. | ||
| View original record | RR 788 (10M) (30405. 21-4-32) BM. 3/8382/4. ORIGINAL Completed 14.10.32. STANDARDISATION of CHASSIS PARTS. Date 15.8.32. X No. 7350 Drawing No. G. 78624 Part No. G. 78088 List G. 78529 Description of… | ||
| img043 | Standardisation form concerning a rear axle ratio part. | ||
| View original record | STANDARDISATION of CHASSIS PARTS Description of Part: REAR AXLE 1X & XI RATIO Origin Experimental Test Report Road Test Report Box: X 1750 The number of the first chassis on which the new part will be… | ||
| img044 | Standardisation of a spring for torque reaction dampers. | ||
| View original record | RR 755 (10M) (30405. 21-4-32) BM. 3/6383/4. ORIGINAL COMPLETED 14.10.32. STANDARDISATION of CHASSIS PARTS. Date 12.8.32. X No. 7005 Drawing No. G.1564 Part List Description of Parts. SPRING FOR TORQUE… | ||
| img045 | Standardization document concerning the spring for the shock damper reaction. | ||
| View original record | STANDARDISATION of CHASSIS PARTS TOOL ROOM Passed: X Description of Part: SPRING FOR SHOCK DAMPER REACTION Origin: Major Reason for Change: To obtain a spring for all conditions of service. Estimated… | ||
| img046 | Standardisation proposal for the deletion of the body sub-frame on the Phantom II chassis to reduce cost and weight. | ||
| View original record | RR 788 (10H) (10120, 19-10-31) BM. 3/7586. COMPLETED 14.10.32. STANDARDISATION of CHASSIS PARTS. Date 16.7.32. X No. 7380 Drawing No. Part List Description of Parts: DELETION OF BODY SUB-FRAME.… | ||
| img047 | Standardisation & Assize Parts form detailing the testing schedule for a new part on the G.2. Series chassis. | ||
| View original record | STANDARDISATION & ASSIZE PARTS Description of Parts Origin Experimental Test Report Road Test Report Drawing No. Part No. Date X Weight of Old Part Cost of Old Part Weight of New Part Cost of New Part… | ||
| img048 | Standardisation of chassis parts, specifically 19' road wheels with two rows of spokes. | ||
| View original record | RR 758 (10M) (30405, 21-4-32) BM. 3/5352/4. COMPLETED 14.10.32 STANDARDISATION of CHASSIS PARTS. Date 17.8.32 Description of Parts. 19" ROAD WHEELS WITH TWO ROWS OF SPOKES. X No. 7810. Drawing No.… | ||
| img049 | Approval document for the standardization of a chassis part, detailing implementation and sign-offs. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS Date 11.8.32 Ref No. X 7810 The number of the first chassis on which the new part will be fitted.................. O.2. series Date when chassis will be handed to… | ||
| img050 | Standardisation of a stronger spring under the auxiliary shoe of rear brakes. | ||
| View original record | RR 755 (10M) (19120, 13-10-31) SM. 3/7568. COMPLETED 14.10.32. STANDARDISATION of CHASSIS PARTS. Date 12.8.32. X No.7360 Drawing No. G. 80050 Part List Description of Parts. STRONGER SPRING UNDER… | ||
| img051 | Standardization form for an auxiliary spring on the rear brake. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS Description of part AUXILIARY SPRING UNDER REVERSE CAMBER SIDE OF EACH REAR BRAKE. Origin Gives a longer life before spring becomes permanently set. Reason for… | ||
| img052 | Standardisation of chassis parts for a Shimmy Shackle, 40/50 HP. | ||
| View original record | RR 755 (10M) (19120. 13-10-31) B.M. 5/7555 COMPLETED 14.10.32. ORIGINAL STANDARDISATION of CHASSIS PARTS. Date 27.6.32. X No. 7410. 435. Drawing NS No. 3452 Part List Description of Parts. SHIMMY… | ||
| img053 | Standardization form detailing the introduction of a new part, including the first chassis number for fitting and the test date. | ||
| View original record | Header (upside-down text): STANDARDISATION to 2 PARTS A.S. No X Drawing & Part No. Origin Local Test Report. Experimental Test Report. Handwritten: R. Prowse's Main Body: The number of the first… | ||
| img054 | Standardisation of Chassis Parts for a Synchromesh Gearbox. | ||
| View original record | RR 755 (10H) (19120. 12-10-31) BM. 3/7555. COMPLETED 14.10.32. STANDARDISATION of CHASSIS PARTS. Date 12.8.32. X No. 7310. Drawing LOP No. 79951. Part List Description of Parts. SYNCHROMESH GEARBOX.… | ||
| img055 | The standardisation of chassis parts for a synchromesh gearbox. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS Description of Part. SYNCHROMESH GEARBOX. Origin. To facilitate ease of gearchanging and direct drive. Report. Back rest Experimental Test Report. The number of the… | ||
| img056 | Standardisation of chassis parts for a new type of tyre tread. | ||
| View original record | RR 785 (10M) (30405. 21-4-32) BM. 3/8382/4. COMPLETED .14.10.32. STANDARDISATION of CHASSIS PARTS. Description of Parts. NEW TYPE TYRE TREAD. Origin. To replace existing silent tread. Experimental… | ||
| img057 | Standardization proposal form for a chassis part to replace the existing silent-bloc. | ||
| View original record | COMPLETED 13.10.32 CS/12.6.32 STANDARDISATION OF CHASSIS PARTS. Drawing No. X D4090 Description of Part NEW TYPE THAT Origin To replace existing silent-bloc. Experimental Test Report Road Test Report… | ||
| img058 | Comparison photograph of two different tire tread patterns, labeled MA1 and MA2. | ||
| View original record | MA1 MA2 | ||
| img059 | Photograph showing a close-up of two tyres with a block tread pattern. | ||
| View original record | 7.00 - 20 REINFORCED A-2 (W) 7.00 - 21 MA2 | ||
| img060 | Standardisation of a 2.750' diameter propeller shaft to prevent whirling. | ||
| View original record | RR 755 (10M) (30405. 21-4-32) BM. 3/8362/4. COMPLETED 26.10.32. ORIGINAL STANDARDISATION of CHASSIS PARTS. Date. 8.32. X No. 7340 LOP Drawing No. S0001 Part No. NS.3364 Part GL. 556 List No. G.79983… | ||
| img061 | Standardisation of chassis parts for the Propeller Shaft '25/30' & 'G.I.D'. | ||
| View original record | STANDARDISATION of CHASSIS PARTS Description in Parts List Order: PROPELLER SHAFT. '25/30' & 'G.I.D' Improvement or prevention of fitting: Nil. Road Test Report: Nil. Experimental Test Report: Nil.… | ||
| img062 | Standardisation report for a new type of servo lining for the 20/25 & 40/50 chassis. | ||
| View original record | RR 785 (10M) (30405, 21-4-32) BM. 3/8382/4. COMPLETED 10.11.32. STANDARDISATION of CHASSIS PARTS Description of Parts. NEW TYPE OF SERVO LINING FOR 20/25 & 40/50. Origin. To improve durability.… | ||
| img063 | Standardization of chassis parts, detailing testing, costs, and department approvals. | ||
| View original record | The text below includes mirrored text from the reverse side of the document, as well as typed and handwritten text from the primary side. Mirrored text: STANDARDIZATION OF CHASSIS PARTS STRAP 2/ Date.… | ||
| img064 | Standardisation of a Nitro Hardened Crankshaft for chassis parts. | ||
| View original record | COMPLETED 11.11.32. STANDARDISATION of CHASSIS PARTS. Description of Parts. NITRO HARDENED CRANKSHAFT. Origin. To reduce wear. Experimental Test Report. A standardisation sheet was issued 19/9/30 for… | ||
| img065 | Standardisation of chassis parts form for a hardened crankshaft. | ||
| View original record | STANDARDISATION of CHASSIS PARTS Description of Part: WITH HARDENED CRANKSHAFT Order: To reduce wear. Experiment Test Report: Road Test Report: run 1,000 miles in R-13-T Trance A standardisation sheet… | ||
| img066 | Standardisation report for a new type exhaust valve and stronger tappet springs for present standard cars. | ||
| View original record | RR 759 (10M) (30405, 21-4-32) BM. 3/8382.4. COMPLETED 15.11.32. ORIGINAL STANDARDISATION of CHASSIS PARTS. Date 22.9.32. No. 7230 Drawing No. 82489 Part List Description of Parts: NEW TYPE EXHAUST… | ||
| img067 | Standardisation document for fitting a further batch of improved exhaust valves for road testing. | ||
| View original record | ORIGINAL STANDARDISATION of CHASSIS PARTS. Description of part, or particulars of WHAT IS PROPOSED: TO FIT A FURTHER BATCH FOR ROAD TEST. Object: To prove exhaust valves incorporating on stems 1-C… | ||
| img068 | Standardisation of chassis parts to increase the percentage of braking on the front axle. | ||
| View original record | RR 782 (10H) (50405. 21-4-32) BM. S/8382/4. COMPLETED 21.11.32. STANDARDISATION of CHASSIS PARTS. Description of Parts. INCREASED PERCENTAGE OF BRAKING ON THE FRONT AXLE FROM 35 to 40% (amended by… | ||
| img069 | Standardisation form for a new chassis part, detailing approvals and implementation schedule. | ||
| View original record | STANDARDISATION of CHASSIS PARTS Ref. No. AG/92/W Date 18.01.33 Origin Drawing X Plan Used on Description of part or alteration CHASSIS No. FROM WHICH OBTAINED Experimental Test Report Road Test… | ||
| img070 | Standardisation of chassis parts for improved exhaust valves made in S/SLV. | ||
| View original record | RR 788 (10H) (30405. 21.4.32) BM. 3/8382/4. COMPLETED 26.11.32. ORIGINAL STANDARDISATION of CHASSIS PARTS. Date 6.9.32. X No. 7230 Drawing No. E. 33095 Part List Description of Parts. IMPROVED EXHAUST… | ||
| img071 | The standardisation of chassis parts. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS Drawing No. Z9-JOH XMX 1230 Date 20. NOV. 20 20 / XMX Description of Parts: These valves have now given a very good test and are to be fitted. Order: Circumstances… | ||
| img072 | Standardisation of a 114° camshaft long duration in conjunction with stronger tappet springs. | ||
| View original record | RR 785 (10M) (30405. 21-4-32) BM. 3/8382/4. COMPLETED 29.11.32. ORIGINAL STANDARDISATION of CHASSIS PARTS. Date 6.9.32. X No. 7090 Drawing B No. 82448 Part Hs. 502 List Description of Parts. 114°… | ||
| img073 | Standardisation of a main oil pipe in conjunction with new engine mountings. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS Description of Part AFFECTED... PART IN MIND IS MAIN OIL PIPE FROM PUMP TO STRAINER NOW FITTED IN CONJUNCTION WITH THE NEW ENGINE MOUNTINGS. Origin: To increase… | ||
| img074 | Proposal for the deletion of petrol filters from the main petrol tank. | ||
| View original record | RR 785 (10H) (30405. 21-4-32) BM. 3/8382/4. COMPLETED 6.1.33. ORIGINAL STANDARDISATION of CHASSIS PARTS. Date 6.12.32. X No. 7460 Drawing No. Part List Description of Parts: DELETION OF PETROL FILTERS… | ||
| img075 | Standardisation report for chassis parts. | ||
| View original record | STANDARDISATION of CHASSIS PARTS. ORIGINAL Description of parts Origin Draw'g No. X 0801 Experimental Report Road Test Report The number of the first chassis on which the new part will be fitted... As… | ||
| img076 | Standardisation of a balanced crank for chassis parts. | ||
| View original record | RR 755 (10H) (19120. 13-10-31) BM. 3/7588. COMPLETED 16.1.33. STANDARDISATION of CHASSIS PARTS. Description of Parts. BALANCED CRANK TO SCH.1549. Origin. Improve bearing conditions on 40/50.… | ||
| img077 | Standardisation sheet for chassis parts, detailing costs, test dates, and handling of surplus forgings. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS. The number of the first chassis on which the new part will be fitted........ 'G' Series. Date when chassis will be handed to test.... Nov. 26th.1932. Cost of scrapped… | ||
| img078 | Standardisation of a soft copper radiator cap washer to replace the existing rubber washer. | ||
| View original record | RR 755 (10M) (30405. 21-4-32) BM. 3/6382. 4. COMPLETED 16.1.33. STANDARDISATION of CHASSIS PARTS. Description of Parts: SOFT COPPER WASHER EXPANDED INTO EXISTING RADIATOR CAP TO REPLACE RUBBER WASHER.… | ||
| img079 | Form for documenting the standardisation of chassis parts. | ||
| View original record | STANDARDISATION of CHASSIS PARTS Description of proposed alteration and sketches on back where necessary. Reason for Alteration. Opinion of the Head Tester, and other departments affected, e.g.… | ||
| img080 | Standardisation of a sequence starter switch by deleting the relay portion to simplify and reduce cost. | ||
| View original record | RR 789 (10H) (30405, 21-4-32) BM. 3/8382/4 ORIGINAL COMPLETED 3.2.33. STANDARDISATION of CHASSIS PARTS. Date 17.8.32. Description of Parts: SEQUENCE STARTER SWITCH WITH RELAY PORTION DELETED. Origin:… | ||
| img081 | Standardisation form for a chassis part, outlining implementation details, costs, and approvals. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS APPROACH STARTER FITTING WITH YAJUS. PORTION ENLARGED. TO simplify and reduce the cost of AIR... one switch and completed on 19-3-XX, 64,000 miles on EX-13 All Exps.… | ||
| img082 | Standardisation of a semi-expanding carburetter for chassis parts. | ||
| View original record | RR 785 (10M) (30405. 21-4-32) BM. 3/8382/4. COMPLETED 8.2.33. STANDARDISATION of CHASSIS PARTS. Description of Parts. SEMI-EXPANDING CARBURETTER. Origin. To increase efficiency of Engine. Experimental… | ||
| img083 | Standardisation form for a new 'G' Series Continental Chassis part. | ||
| View original record | STANDARDISATION of CHASSIS PARTS Description of Part... L-H.E. DRAW-ING No. Group: X To increase efficiency of Engine. Final Report Experimental Test Report Fitted to OS-S2 and S2-S4 models, also all… | ||
| img084 | Standardisation of clutch springs, pedal, fingers, and operating lever. | ||
| View original record | RR 78B (10H) (30408, 21-4-32) BM. 3/8382 4. COMPLETED 14.2.33. STANDARDISATION of CHASSIS PARTS. Date: 6.9.32. X No. 7300 Drawing No. Part List Description of Parts: CLUTCH SPRINGS Hs.652, CLUTCH… | ||
| img085 | Standardisation form for a radiator shutter control cable, detailing modifications, costs, and approvals. | ||
| View original record | STANDARDISATION of CHASSIS PARTS. COMPLETED 2.12.33 Ref. No. X / 300 Date 2.12.33 Description of Part RADIATOR SHUTTER CONTROL CABLE. As RH.688. but incorporating 90 deg. angle piece. Object of… | ||
| img086 | Standardisation of two Lucas H.F.722 electric horns secured to headlamp pillars. | ||
| View original record | RR 78B (10M) (30405. 21-4-32) BM. 3/8382.4. COMPLETED 20.3.33 STANDARDISATION of CHASSIS PARTS. Description of Parts. TWO LUCAS H.F.722 ELECTRIC HORNS SECURED TO HEADLAMP PILLARS. Origin. To improve… | ||
| img087 | Proposal for the standardisation of a two-speed wiper motor and blades for chassis. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS. Description of Part: TWO SPEED WIPER MOTOR & BLADES (T.D. 8300) Origin: To improve dust screen wiper sys. Drawing No. Part No. Road Test Report Experimental Report A… | ||
| img088 | Standardisation of an engine low inertia damper with a strengthened friction plate. | ||
| View original record | RR 78B (10M) (30405. 21.4.32) BM. 3/8382.4. COMPLETED 28.3.33. STANDARDISATION of CHASSIS PARTS. Date 12.8.32 X No. 7520 Drawing No. LeC 3104 Part List Description of Parts. ENGINE LOW INERTIA DAMPER… | ||
| img089 | Standardisation of chassis parts to overcome the failure of friction plates on the engine damper. | ||
| View original record | COMPLETED 22.9.32 STANDARDISATION OF CHASSIS PARTS Description of Part: ENGINE WITH NEW TYPE FRICTION DAMPER. STRAIGHTEN FRICTION PLATES. Drawing No.: X 1950 Object: To overcome failure of friction… | ||
| img090 | Standardisation proposal for D.W.S. permanent jacks to facilitate car jacking. | ||
| View original record | RR 785 (10M) (30405. 21-4-32) BM. 3/8382/4. COMPLETED 28.3.33. STANDARDISATION of CHASSIS PARTS. Date: 16.11.32. Drawing No. X 3187 Part List Description of Parts: D.W.S. PERMANENT JACKS. Origin: To… | ||
| img091 | Form for tracking the standardisation of chassis parts, including costs, testing, and approvals. | ||
| View original record | COMPLETED 2.4.29 STANDARDISATION OF CHASSIS PARTS Drawing No. X Date Issue Description of Parts: Order No. EXPERIMENTAL TICKET No. S.P.T TO INCORPORATE on FIRST AVAILABLE CHASSIS Experimental Test… | ||
| img092 | Standardisation of a starter motor with automatic lubricated bearings. | ||
| View original record | RR 788 (10M) (30408. 21-4-32) BM. S/5382/4. ORIGINAL COMPLETED 4.4.33. STANDARDISATION of CHASSIS PARTS. Date 12.8.32. X No. 6079 Drawing No. XL-27-PR Part XL18XL1 List XL4 XL26 D.72041 deleted.… | ||
| img093 | Standardisation report for automatic lubricated rear motor feet, detailing proposed changes and test plans. | ||
| View original record | STANDARDISATION of CHASSIS PARTS [Left-side box] STAMP: WORKS Box entries: DIN, MIX, XUL, DRAFT STAMP: 29-V2 STAMP: DEFERRED [Main Table] Description of part: REAR MOTOR FEET AUTOMATIC LUBRICATED… | ||
| img094 | Standardisation of a complete exhaust system with a resonant silencer for the Continental Type Phantom II. | ||
| View original record | RR 755 (10M) (30405. 21-4-32) BM. 3/6382.4. ORIGINAL COMPLETED 6.4.33. STANDARDISATION of CHASSIS PARTS. Date 22.9.32 Description of Parts. Complete Exhaust System with Resonant Silencer. Origin. To… | ||
| img095 | Sanction form for the standardisation of chassis parts. | ||
| View original record | STANDARDISATION of CHASSIS PARTS S.T.D. 6 / 22.9.32 Description of Parts ORIG [X] 18th OCT 1932 Crowned G.O. 6005/M rel Complete an existing drawing or prepare a new one. Object To obtain a Test… | ||
| img096 | Standardisation document for the reverse gear, long pattern (CL. 595). | ||
| View original record | RR 78B (10M) (30405, 21-4-32) BM. 5/8382/4. COMPLETED 6.4.33. ORIGINAL STANDARDISATION of CHASSIS PARTS. Date 12.12.32. X No. 7310 Drawing No. Part List Description of Parts.: REVERSE GEAR CL. 595… | ||
| img097 | Standardization of chassis parts approval and costing form. | ||
| View original record | STANDARDIZATION of CHASSIS PARTS Reference Number: S.C.P/3.E.28 Date: 1.2.33 Top Table: Description of Part Origin Date X IN 1930 - X is marked Drawing No. Part No. Load Test Report Experimental Test… | ||
| img098 | Standardisation of the servo motor centre ball bearing on the servo bridge. | ||
| View original record | RR 785 (10H) (30405. 21-4-32) BM. 3/8382/4. COMPLETED 19.4.33. STANDARDISATION of CHASSIS PARTS. ORIGINAL Date 5.10.32. No. X. 7370 Drawing No. LEC. 3083. Part List Description of Parts. SERVO MOTOR… | ||
| img099 | Standardisation form for a new Overton Motor Centre Ball, detailing test results, costs, and approvals. | ||
| View original record | ORIGINAL. STANDARDISATION OF CHASSIS PARTS. Description of Part: OVERTON MOTOR CENTRE BALL REASON FOR CHANGE: BEARING ON SWIVEL END Origin: To overcome binding of servo due to wear of bearing. Load… | ||
| img100 | Standardisation of chassis parts, specifically exhaust valves Lec.3303 and guides Lec.3240. | ||
| View original record | RR 759 (10M) (37133, 26-10-32) BM. 3/9064/1. ORIGINAL [STAMP] COMPLETED 4.5.33. [STAMP] STANDARDISATION of CHASSIS PARTS. Date 2.3.33. No. 7060. Drawing No. Part List Description of Parts. EXHAUST… | ||
| img101 | Standardisation of an exhaust valve part. | ||
| View original record | COMPLETED 2.9.22 STANDARDISATION of CHASSIS PARTS. Description of Part: EXHAUST VALVES. Spec. 2202. A CHIEF'S Lec. 2202. Origin: To prevent cracking of valve heads and burning of seats which has… | ||
| img102 | Standardisation report for a carburettor air silencer designed to reduce noise. | ||
| View original record | RR 755 (10H) (30405. 21-4-32) BM. 3/8382/4. ORIGINAL COMPLETED 9.5.33. STANDARDISATION of CHASSIS PARTS. Date 3.2.33. Description of Parts. CARBURETTER AIR SILENCER 40/50 Lec.3354. Origin. TO REDUCE… | ||
| img103 | Form for the standardization of chassis parts, detailing implementation, costs, and departmental sign-offs. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS REF. NO. 5/33 Description of Parts: Origin: Drawing No. Part No. Tool Drwg. No. Road Test Report Experimental Report Works Order No: STAMPED TEXT: MOTION The number of… | ||
| img104 | Standardisation of Chassis Parts report on the deletion of the governor throttle control on the carburetter for the Phantom I. | ||
| View original record | RR 785 (10M) (37133. 28-10-32) BN. 3/9064/1. ORIGINAL COMPLETED 9.5.33. STANDARDISATION of CHASSIS PARTS. Date 22.4.33 X No.7080. Drawing No. Part List Description of Parts. GOVERNOR THROTTLE CONTROL… | ||
| img105 | Standardisation of Aero Shell lubricating oil as an alternative for engine lubrication. | ||
| View original record | RR 75S (10M) (37133. 28-10-32) BM. 3/9064/1. ORIGINAL COMPLETED 20.5.33. STANDARDISATION of CHASSIS PARTS. Description of Parts. AERO SHELL LUBRICATING OIL. Origin. An alternative oil for engine… | ||
| img106 | Standardisation of J.III type shock dampers and axle control. | ||
| View original record | RR 785 (10H) (30405. 21-4-32) BM. 3/8382/4. COMPLETED 24.5.33. STANDARDISATION of CHASSIS PARTS. Date 24.2.33. X No. 7520 Drawing No. Part List F84936/7/8 Description of Parts. J.III TYPE SHOCK… | ||
| img107 | Standardisation of L.III.T type shock damper & axle control for chassis parts. | ||
| View original record | COMPLETED S.V 2.6.33 STANDARDISATION of CHASSIS PARTS Date 24.2.33. S.S./X.6280 Description of Part: L.III.T TYPE SHOCK DAMPER & AXLE CONTROL. Origin: Experimental Dept. Test Report on Hand Control… | ||
| img108 | Standardisation report for a Marston Mark III type matrix for 40/50HP radiators. | ||
| View original record | RR 785 (10M) (30405. 21-4-32) BM. 3/8382/4. ORIGINAL COMPLETED 2.6.33. STANDARDISATION of CHASSIS PARTS. Date 5.2.33. X No. 7130 (7250 crossed out) Drawing No. Part List Description of Parts. MARSTON… | ||
| img109 | Form for the standardisation of chassis parts, detailing implementation, costs, and an approval routing list. | ||
| View original record | STANDARDISATION of CHASSIS PARTS [Table Headers] Description of parts Origin Drawing No. Experiment Test Report Road Test Report [Form Fields] The number of the first chassis on which the new part… | ||
| img110 | Standardisation of a helical second gear (New Scheme 3631) to reduce gear noise. | ||
| View original record | COMPLETED 14.6.33. STANDARDISATION of CHASSIS PARTS. Date 3.2.33. Drawing No. X No. 7310 Part List Description of Parts. HELICAL 2nd. GEAR N. Sch. 3631. Origin. TO REDUCE GEAR NOISE. Experimental Test… | ||
| img111 | Standardisation of chassis parts form detailing costs and implementation. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS Description of Part AND THE REASON Order Road Test Report Experimental Test Report Drawing Office No.: X Approved or Not Origin PART No. REPLACED [STAMP: PLANT] The… | ||
| img112 | Standardisation of chassis parts for a Marston type radiator matrix. | ||
| View original record | RR 759 (10M) (37133. 28-10-32) BM. 3/9064/1. COMPLETED 3.8.33. STANDARDISATION of CHASSIS PARTS. Date 30.6.33. X No. 5250 Drawing No. Part List Description of Parts. MARSTON TYPE RADIATOR MATRIX.… | ||
| img113 | Standardisation form for a more efficient radiator, including chassis fitting and test dates. | ||
| View original record | STANDARDISATION of CHASSIS PARTS Description of Part Origin REASON FOR CHANGE. THE CHANGE MUST BE JUSTIFIED. To obtain a more efficient radiator Road Test Report Experimental Test Report The number of… | ||
| img114 | Standardisation of chassis parts, documenting the deletion of the filter in the Autovac system. | ||
| View original record | RR 785 (10M) (37133. 28-10-32) BM. 3/9054/1. ORIGINAL COMPLETED 3.8.33. STANDARDISATION of CHASSIS PARTS. Date 5.7.33. Description of Parts. DELETION OF FILTER IN AUTOVAC. X No. 3579. Drawing No. Part… | ||
| img115 | Standardisation form for chassis parts detailing costs and fitting schedules. | ||
| View original record | ORIGINAL STANDARDISATION OF CHASSIS PARTS Date Drawing No. X Part No. Ref. Description of Part Origin Works modification of Experimental Test Report Bent Test Report The number of the first chassis on… | ||
| img116 | Standardisation of chassis parts for a Smith electric petrol gauge with fuse. | ||
| View original record | RR 755 (10M) (37133. 28-10-32) BM. 3/9064/1. COMPLETED 1.9.33. STANDARDISATION of CHASSIS PARTS. Date 19.7.33. Description of Parts. SMITH ELECTRIC PETROL GAUGE WITH FUSE INCORPORATED. X No. 6135… | ||
| img117 | Standardization report for HP Chassis parts, stamped 'STANTON'. | ||
| View original record | STANDARDISATION of CHASSIS PARTS Description of Part: Reason for modification: Drawing No.: Part No.: Experimental Test Report: Hand Test Report: H.P. CHASSIS 813 STANTON Cost of old part Weight of… | ||
| img118 | Standardisation report for an engine coupling to address fabric disintegration complaints. | ||
| View original record | RR 78B (10M) (30405. 21-4-32) BM. 3/8382/1. ORIGINAL COMPLETED 6.9.33. STANDARDISATION of CHASSIS PARTS. Date 8.2.33. X No. 512 / 7305 Drawing No. Part List Description of Parts. ENGINE COUPLING R.R.… | ||
| img119 | Standardisation of engine coupling due to complaints of the flexible coupling. | ||
| View original record | STANDARDISATION of CHASSIS PARTS Description of Part: ENGINE COUPLING B.R.R. HDS. 222 (AOB.) Origin: To overcome complaint of flexible coupling Road Test Report: No trouble has been experienced.… | ||
| img120 | Standardisation report for the Luvax system of chassis lubrication. | ||
| View original record | RR 765 (10M) (30405. 21-4-32) BM. 3/8382.4. COMPLETED 20.9.33. STANDARDISATION of CHASSIS PARTS. Date 12.8.32 X No. 7980 Drawing No. Part List Description of Parts. LUVAX SYSTEM OF CHASSIS… | ||
| img121 | Standardisation form for the Luvax chassis lubrication system due to service complaints. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS Ref. X. 1980 Date: 12.8.32 Chassis System: LUVAX SYSTEM OF CHASSIS LUBRICATION Owner: To overcome numerous complaints in Service. Technical Report: (Left Box) Fitting… | ||
| img122 | Standardisation of a Liongess distribution board incorporating accessory fuses, to delete it and simplify wiring. | ||
| View original record | RR 735 (10H) (37133. 28-10-32) BM. 3/9054/1. ORIGINAL COMPLETED 28.9.33. STANDARDISATION of CHASSIS PARTS. Description of Parts. LIONGESS DISTRIBUTION BOARD INCORPORATING ACCESSORY FUSES, CUT-OUT IN… | ||
| img123 | Form specifying the first chassis for a new part, its test date, and associated costs. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS The number of the first chassis on which the new part will be fitted......... R.2. series. Date when chassis will be handed to test. 11.12.33. Cost of scrapped… | ||
| img124 | Standardisation of a Shunt Dynamo controlled by a C.A.V. Type B2 Constant Voltage Vibrator Regulator. | ||
| View original record | RR 758 (10M) (30405. 21.4.32) BM. S/8362/4. ORIGINAL COMPLETED 28.9.33. STANDARDISATION of CHASSIS PARTS. Date 24.9.32. X No. 6142 X No. 6092 Drawing No. Part List Description of Parts. R.R. SHUNT… | ||
| img125 | Standardisation form for a chassis part for the R.2. series. | ||
| View original record | STANDARDISATION of CHASSIS PARTS REFERENCE No. S. 4138/33 DATE 21.8.35 The number of the first chassis on which the new part will be fitted... R.2. Series. Date when chassis will be handed to test.… | ||
| img126 | Standardisation document for a non-spillable petrol tank filler. | ||
| View original record | RR 758 (10M) (37133. 28-10-32) BM. 3/9054/1. ORIGINAL COMPLETED 3.10.33 STANDARDISATION of CHASSIS PARTS. Description of Parts. NONE SPILLABLE PETROL TANK FILLER. Origin. To prevent splashing of… | ||
| img127 | Standardisation form for fitting non-splitting type torque tube fittings and a new hand brake lever to chassis. | ||
| View original record | STANDARDISATION of CHASSIS PARTS. Ref. No. A.C./22.12.33 Date 22.12.33 DRAWING No. X MODIFICATION TEST REPORT Origin: To prevent splitting of torque tube. Description of new part: The non-splitting… | ||
| img128 | Standardisation of Hartford shock absorbers with tele-control to provide adjustable dampers. | ||
| View original record | RR 738 (10M) (37133. 28-10-32) BN. 3/9064/1. ORIGINAL COMPLETED 13.10.33. STANDARDISATION of CHASSIS PARTS. Date 4.7.33. X No. 7120. 7520. Drawing No. Part List Description of Parts. HARTFORD SHOCK… | ||
| img129 | Standardisation report for a withdrawn 'Jury-Strut' amendment on a chassis. | ||
| View original record | STANDARDISATION of CHASSIS PARTS LIMIT X Drawing No Req AMENDMENT WITH-DRAWN - JURY-STRUT Last Test Report These attachments have never been fitted because of alterations to front axle. Experimental… | ||
| img130 | Standardisation of chassis parts, specifically a larger oil filler for the crankcase. | ||
| View original record | RR 759 (10M) (37133. 28-10-32) BM. 9/9064/1. COMPLETED 3.11.33 STANDARDISATION of CHASSIS PARTS. Date 14.7.33. X No. 7000 Drawing No. F.T.S. 143 Part List Description of Parts. LARGER OIL FILLER TO… | ||
| img131 | Standardization record for a chassis part. | ||
| View original record | STANDARDISATION CHASSIS PARTS Description of part. ORIGIN DETAIL of ALTERN. or FITTING Experimental Test Report. Road Test Report. PLANT LAYOUT The number of the first chassis on which the new part… | ||
| img132 | Standardisation of parts for controllable shock dampers. | ||
| View original record | RR 755 (SH) (52674, 16-10-33) BM. 9/262/6. ORIGINAL COMPLETED 7.12.33. 40/50 STANDARDISATION of PARTS. Date 21.11.33 X No. 7520 Drawing No. Part List Description of Parts. CONTROLLABLE SHOCK DAMPERS.… | ||
| img133 | Comparing a lightened 28-gallon petrol tank with a heavy gauge and 18-gallon version. | ||
| View original record | ORIGINAL COPY To Hs/Lid. from G/Rb. G/Rb.5/A/139AL/W.81233. ---------------- Lightened 28 Gallon Petrol Tank - 40/50 HP. Standardisation Sheet - X.7460. ---------------- We return herewith the above… | ||
| img134 | Standardisation of parts report for a lightened 18-gallon petrol tank. | ||
| View original record | RR 728 (SH) (S2674, 16-10-33) BM. S/262/G. COMPLETED 20.12.33 40/50 STANDARDISATION of PARTS. Date 9.12.33 X No. 7460. Drawing No. F. 85553. Part List Description of Parts. LIGHTENED 18 GALLON PETROL… | ||
| img135 | Standardisation of the Marston Mark III Radiator Matrix. | ||
| View original record | RR 785 (SH) (52674. 16-10-33) BM. 3/262/6. Comp. 20.12.33 40/50 STANDARDISATION of PARTS. Date 25.11.33 X No. 7250. 7120. Drawing No. Part List Description of Parts. MARSTON MARK III RADIATOR MATRIX.… | ||
| img136 | Standardisation of an ignition distributor contact finger for Bentley & R.R. chassis. | ||
| View original record | RR 75B (SH) (52674, 16-10-33) BM. 3/262/6. COMPLETED 3.1.34. 40/50 STANDARDISATION of PARTS. Date 25.11.33 X No. 6118. Drawing No. Part List Description of Parts. IGNITION DISTRIBUTOR CONTACT FINGER… | ||
| img137 | Standardisation of parts for bonnet stops. | ||
| View original record | RR 788 (SH) (58674. 16-10-33) BM. 9/262/6. ORIGINAL COMPLETED 9.1.34. 40/50 STANDARDISATION of PARTS. Date 6.12.33. X No. 1140/7260. Drawing LeC. No. 3537. Part List Description of Parts. BONNET… | ||
| img138 | Standardisation of parts for a 3-speed D.W.S. jack handle. | ||
| View original record | RR 729 (5M) (S2574. 16-10-33) BM. 3/262/6. ORIGINAL COMPLETED 23.2.34. 40/50 STANDARDISATION of PARTS. Description of Parts. 3-SPEED D.W.S. JACK HANDLE. Origin. To lessen time taken to raise and lower… | ||
| img139 | Standardisation of parts for a worm and wheel adjustment for operating the slow running plug on Phantom II carburettors. | ||
| View original record | RR 785 (BH) (52674, 16-10-33) BM. 3/262/6. COMPLETED 13.3.34. 40/50 STANDARDISATION of PARTS. Date 29.1.34. X No. 7060. Drawing No. Details Part List No. DY/Cal/El. 17.7.33. Description of Parts. WORM… | ||
| img140 | Standardisation of a Phantom II starting carburettor control locking device. | ||
| View original record | RR 78B (BH) (52674. 16-10-33) BM. 3/262/6. ORIGINAL COMPLETED 10.4.34 40/50 STANDARDISATION of PARTS. Date 1.3.34 X No. 7280. Drawing LEC. No. 3775. Part List Description of Parts. P.II STARTING… | ||
| img141 | Standardisation of parts document for a stop lamp switch. | ||
| View original record | RR 78B (SH) (S2674, 16-10-33) BM. S/252/4. ORIGINAL COMPLETED 10.4.34. 40/50 STANDARDISATION of PARTS. Date 6.3.34. X No. 6029. Drawing No. R.R. Sch. 480 Part List Description of Parts: STOP LAMP… | ||
| img142 | Standardisation of parts for a petrol tank sealed filler air vent. | ||
| View original record | RR 785 (SH) (S2674, 16-10-33) BM. 3/262/S. COMPLETED 25.4.34. 40/50 STANDARDISATION of PARTS. Date 11.4.34. X No. 7460. Drawing No. F.86074 Part List Description of Parts. PETROL TANK SEALED FILLER… | ||
| img143 | Standardisation report for a Lucas combined stop and tail lamp to supersede a problematic Butler lamp. | ||
| View original record | RR 78B (SH) (S2674, 16-10-33) BM. 3/262/6. COMPLETED 28.5.34. 40/50 STANDARDISATION of PARTS. Date 27.4.34. Description of Parts. LUCAS COMBINED STOP & TAIL LAMP. X No. 6076. Drawing No. Part List… | ||
| img144 | Standardisation of a battery ignition distributor incorporating a circular condenser made by The Telegraph Condenser Co. | ||
| View original record | RR 785 (BH) (S2674, 18-10-33) BM. 5/262/6. COMPLETED 18.6.34. 40/50 STANDARDISATION of PARTS. Date: 29.5.34. Drawing No. X No.6119. Part List Description of Parts. BATTERY IGNITION DISTRIBUTOR TO… | ||
| img145 | Cost estimate for extra jigs, tools, and equipment for the 'T' series chassis products. | ||
| View original record | The document contains pre-printed text which is upside down relative to the typed and handwritten entries. Pre-printed text (upside down): STANDARDISATION of PARTS OS|04 Date. 28.5.34 X .GIRLING… | ||
| img146 | Standardisation of parts relating to external clutch adjustment and modification to coupling. | ||
| View original record | RR 78B (SH) (52674. 16-10-33) BM. 3/262/6. COMPLETED 18.6.34. 40/50 STANDARDISATION of PARTS. Date 28.5.34. Description of Parts. EXTERNAL CLUTCH ADJUSTMENT AND WITH MODIFICATION TO COUPLING. X No.… | ||
| img147 | Cost estimation for extra jigs, tools, and equipment for the 'T' series chassis. | ||
| View original record | Main Entry: Est. cost of extra jigs, tools and equipment (Sft/Ws.11.5.34) - £56.0.0. Could be brought on to production at 1st chassis in 'T' series. (Sft/GH.11.5.34) without scrap. Mirrored Form… | ||
| img148 | Standardisation of parts for the concealed front cross member, headlamp mounting, and front apron. | ||
| View original record | RR 755 (SH) (52674, 16-10-33) SM. 3/262/6. COMPLETED 18.6.34. 40/50 STANDARDISATION of PARTS. Date 1.5.34. X No. 7380. Drawing No. LeC. 3751. Part List Description of Parts. CONCEALED FRONT CROSS… | ||
| img149 | The costs for a part standardization and modification for 'S' series vehicles. | ||
| View original record | STANDARDISATION of PARTS 40/SO Date... X.7.34 Drawing No... 1812 Ref... EXHAUST THRUST BEARING MAIN (BALL) THRUST BEARING Improved design Is excess of £1,000 to be set aside? No. Is amount sufficient… | ||
| img150 | Standardisation of parts document for backed off second speed dog teeth. | ||
| View original record | RR 785 (SH) (52674, 16-10-33) BM. S/262/6. COMPLETED 18.6.34. 40/50 STANDARDISATION OF PARTS. Date 18.5.34. X No. 7310. Drawing No. Part List Description of Parts. BACKED OFF SECOND SPEED DOG TEETH.… | ||
| img151 | Cost estimate and production feasibility for the standardization of a part. | ||
| View original record | STANDARDISATION OF PARTS HACKED OFF FOR SECOND PROOF TEXT. Est. cost of extra jigs, tools and equipment (Sft/Ws.27.4.34) - £6.0.0d. Could be brought on to production 1 in 'T' series (Sft/GH.27.4.34.)… | ||
| img152 | Standardisation of brake equaliser shafts with spherical bearings. | ||
| View original record | RR 755 (BH) (52674, 16-10-33) BM. 3/262/6. COMPLETED 18.6.34. 40/50 STANDARDISATION of PARTS. Date 28.5.34 X No. 7360. Drawing No. Part List Description of Parts. BRAKE EQUALISER SHAFTS WITH SPHERICAL… | ||
| img153 | Cost and production analysis for standardising brake shoe liners on the 'T' series chassis. | ||
| View original record | 40/SO STANDARDISATION of PARTS DATE 25.5.34 X 7850 Drawing No. Part No. BRAKE SHOE LINERS WITH EXPERIMENTAL BRAKES To reduce line of stock For 10,000 miles on service at no cost Est. cost of extra… | ||
| img154 | Standardisation report for the bifurcated rivetting of brake linings to reduce cost. | ||
| View original record | RR 785 (SH) (52674. 16-10-33) BM. S/262/6. COMPLETED 21.6.34. 40/50 STANDARDISATION of PARTS. Date 28.5.34. Description of Parts. BIFURCATED RIVETTING OF BRAKE LININGS. X No. 7360. Drawing No. Part… | ||
| img155 | Cost estimate for standardising the riveting of brake linings. | ||
| View original record | AO/20 STANDARDISATION of PARTS Date 26.4.35 RIVETTING OF BRAKE LININGS. X Drawing No. To reduce cost. For 10,000 miles on 36-38 at 77 cwt. Found to be satisfactory. Est. cost of extra jigs, tools and… | ||
| img156 | Standardisation of parts document concerning the bifurcated rivetting of clutch linings to reduce cost. | ||
| View original record | RR 788 (SH) (S2574. 16-10-33) BM. 3/262/G. COMPLETED 21.6.34. 40/50 STANDARDISATION of PARTS. Date 28.5.34. Description of Parts. BIFURCATED RIVETTING OF CLUTCH LININGS. X No. 7300. Origin. To reduce… | ||
| img157 | Proposal for standardizing girthgroove rivets for clutch linings to reduce production costs. | ||
| View original record | The document is upside down. When corrected: AC.S.SS/40 Date 25.3.26 STANDARDISATION OF PARTS GIRTHGROOVE RIVETS FOR CLUTCH LINING To reduce cost Report by Department No. Origin Description of… | ||
| img158 | Standardisation of parts for an easy brake adjustment to simplify maintenance. | ||
| View original record | RR 755 (SH) (67512. 20-12-33) BM 3/640/2 COMPLETED 21.6.34. 40/50 STANDARDISATION of PARTS. Date 30.5.34. Description of Parts. EASY BRAKE ADJUSTMENT. X No. 7360. Drawing No. Part List Origin. To… | ||
| img159 | Cost estimate for extra jigs, tools and equipment for a modification instructed for the 'T' series. | ||
| View original record | STANDARDISATION OF PARTS Est. cost of extra jigs, tools and equipment (Sft/Ws. 23.5.34) - £304.0.0. This modification has already been instructed for 'T' series. INSPECTORS A - 12 23.5.34 | ||
| img160 | Standardisation of parts for a fully floating servo. | ||
| View original record | RR 788 (BH) (52674. 16-10-33) BM. 3/262/6. COMPLETED 21.6.34 40/50 STANDARDISATION of PARTS. Date 28.5.34. Description of Parts. FULLY FLOATING SERVO. X No. 7370. Drawing No. GL.700. Part List Origin.… | ||
| img161 | Standardisation sheet for a fully floating bevel, detailing costs and production for extra tooling on the 'T' series chassis. | ||
| View original record | STANDARDISATION OF PARTS FULLY FLOATING BEVEL To obtain maximum stiffness. No splays in the hub lathes. Est. cost of extra jigs, tools and equipment (Sft/Ws.18.5.34) - £36.0.0. Could be brought on to… | ||
| img162 | Standardisation document for an outlet pipe from the water pump with a reduced bore. | ||
| View original record | RR 788 (SH) (R2674, 16-10-33) BM. 3/262/6. COMPLETED 21.6.34. 40/50 STANDARDISATION of PARTS. Date 29.5.34. X No. 7250. Drawing No. Part List Description of Parts. OUTLET PIPE FROM WATER PUMP WITH… | ||
| img163 | Standardisation of an outlet pipe from the water pump with a reduced bore, including tooling costs and production notes. | ||
| View original record | M.A.E. 2195 40/20 3.2.34 STANDARDISATION of PARTS. Drawing Ref. X 1800. CUTLET PIPE FROM WATER PUMP WITH REDUCED BORE. Reason: To prevent loss of water at high speeds. Recommended by Fitted to GS-XH… | ||
| img164 | Standardisation of parts for the washer adjustment of the crown wheel. | ||
| View original record | RR 798 (BH) (52674, 16-10-33) BM. 3/262/6. COMPLETED 21.6.34. 40/50 STANDARDISATION of PARTS. Date 28.5.34 X No. 7350. Drawing No. Part List Description of Parts: WASHER ADJUSTMENT OF CROWN WHEEL.… | ||
| img165 | Cost estimate for extra jigs, tools, and equipment needed to bring the 'T' series chassis into production. | ||
| View original record | 40/SO. STANDARDIZATION of PARTS. ADJUSTMENT OF CHOKE WIRING. Works request. Run 10,000 miles on EX-23. DRAWING NO. X V380 Est. cost of extra jigs, tools and equipment (Sft/Ws.1.5.34) - £43.0.0. Could… | ||
| img166 | Standardisation of parts document for stepped exhaust valve stems. | ||
| View original record | RR 755 (SH) (57312, 29-12-33) BM 3/640/2 COMPLETED 21.6.34. 40/50 STANDARDISATION of PARTS. Date 1.6.34. Description of Parts. EXHAUST VALVE STEMS STEPPED. Drawing No. X No. 7060. Part List Origin. To… | ||
| img167 | Cost estimate for extra jigs and tools for the 'T' series chassis production. | ||
| View original record | Est. cost of extra jigs, tools and equipment (Sft/Ws.28.5.34) - £2.0.0. Could be brought on to production at 1st chassis in 'T' series, (Sft/CH.28.5.34) - without scrap. | ||
| img168 | Standardisation of parts report for a battery box with special indents to hold the battery. | ||
| View original record | COMPLETED 21.6.34. RR 755 (SH) (57312. 29-12-33) BM 3/640/2 40/50 STANDARDISATION of PARTS. Date 1.6.34. X No. 7536. Drawing No. Part List Description of Parts. BATTERY BOX WITH SPECIAL INDENTS TO… | ||
| img169 | Cost estimate for extra jigs, tools, and equipment for the standardisation of parts already in production for the 'S.2' series. | ||
| View original record | M.C.3. / 28 02/04 STANDARDISATION of PARTS ANNULAR BALL RACE AND THRUST BEARING FITTED TO CHASSIS NOS. X DEPT To be fitted in future and existing cars when required. Is jigged for S.2. car, but not… | ||
| img170 | Standardisation of a propeller shaft with needle bearings to prevent seizing in mechanics joints. | ||
| View original record | COMPLETED 21.6.34. RR 753 (SH) (57312. 20-12-33) BM 3/640/2 40/50 STANDARDISATION of PARTS. Date 1.6.34. LOP X No. G80001 Drawing X. 7340 No. Part List Description of Parts. PROPELLOR SHAFT WITH… | ||
| img171 | Cost estimate for extra jigs, tools, and equipment for a modification to the 'S.2' series. | ||
| View original record | STANDARDISATION OF PARTS MODIFICATION TO FRONT AXLE SWIVEL PIN BUSH AND THRUST WASHER. 40/20 Est. cost of extra jigs, tools and equipment (Sft/Ws.25.5.34) - £20.0.0. This modification is already… | ||
| img172 | Standardisation of parts for moving the rear cross member to allow for lower seating. | ||
| View original record | RR 798 (SH) (57312, 29-12-33) BM 3/640/2 COMPLETED 29.6.34. 40/50 STANDARDISATION OF PARTS. Description of Parts. REAR CROSS MEMBER IN FRAME MOVED FOR WELLS IN REAR FLOORBOARDS. Origin. To obtain… | ||
| img173 | Cost estimation for extra jigs, tools, and equipment for the 'S.2' series. | ||
| View original record | SECRET & CONFIDENTIAL STANDARDISATION OF PARTS 40/20 WORKS X Est. cost of extra jigs, tools and equipment (Sft/Ws.25.5.34) - £282.0.0. Already instructed for 'S.2' series. | ||
| img174 | Standardisation document for the modification of balance weight studs to prevent failure. | ||
| View original record | COMPLETED 11.7.34. RR 755 (BH) (S7312. 29-12-33) BM 3/640/2 STANDARDISATION of PARTS. Date 18.6.34 X No. 7010. Drawing No. Part List 40/50 Description of Parts. MODIFICATION TO BALANCE WEIGHT STUDS.… | ||
| img175 | The estimated cost for extra jigs, tools and equipment for a part in the 'S' series. | ||
| View original record | STANDARDISATION of PARTS 4050 Est. cost of extra jigs, tools and equipment (Sft/Ws.5.6.34) - £23.0.0. This part is already instructed for 'S' series. | ||
| img176 | Standardisation of a C.I. bend for an exhaust hot spot to reduce a one beat note. | ||
| View original record | RR 755 (SH) (S7312. 29-12-33) BM 3/640/2 COMPLETED 12.7.34. 40/50 STANDARDISATION of PARTS. Date 22.6.34 X No. 7230. Drawing EX. No. 13565/G Part List Description of Parts. C.I. BEND FOR EXHAUST HOT… | ||
| img177 | Cost estimate for extra jigs, tools and equipment, and potential scrap costs for 'T' series chassis production. | ||
| View original record | STANDARDISATION of PARTS SHOP Est. cost of extra jigs, tools and equipment (Sft/Ws.15.6.34) - £15.0.0. If brought on to production at 1st chassis in 'T' series, (Sft/GH.25.5.34) - cost of scrap… | ||
| img178 | Standardisation of a dynamo drive pinion to scheme LEC.3755. | ||
| View original record | COMPLETED 12.7.34. RR 755 (SH) (57312, 29-12-33) BM 3/640/2 40/50 STANDARDISATION of PARTS. Date 27.6.34 Description of Parts. DYNAMO DRIVE PINION - SCHEME TO LEC.3755. X No. 7100. Drawing No. Part… | ||
| img179 | Cost estimate for extra jigs, tools, and equipment for the 'T' series chassis production. | ||
| View original record | STANDARDISATION OF PARTS 024H. X.1000 Est. cost of extra jigs, tools and equipment (Sft/Ws.15.6.34) - £47.0.0. Could be brought on to production at 1st chassis in 'T' series, (Sft/GH.15.6.34) without… | ||
| img180 | Standardisation of parts for an adjustable exhaust nozzle. | ||
| View original record | COMPLETED 20.7.34. RR 755 (DH) (57312, 20-12-33) BM 3/640/2 40/50 STANDARDISATION of PARTS. Date 28.6.34. Description of Parts. ADJUSTABLE EXHAUST NOZZLE. X No. 7230. Drawing No. RR.Sch. 561. Part… | ||
| img181 | Cost estimate for extra jigs, tools and equipment for parts fitted from the beginning of the 'S' series. | ||
| View original record | STANDARDISATION of PARTS Est. cost of extra jigs, tools and equipment (Sft/Ws. 20.6.34) - £52.0.0. These parts have been fitted from the beginning of 'S' series. | ||
| img182 | Standardisation of parts form for a starter motor main switch with finer gauge coil windings. | ||
| View original record | COMPLETED 20.7.34. 40/50 STANDARDISATION of PARTS. Date 28.6.34. X No. 6080. Drawing No. D100208. Part List Description of Parts. STARTER MOTOR MAIN SWITCH WITH FINER GAUGE COIL WINDINGS D.74174/5.… | ||
| img183 | The estimated cost for jigs, tools, and equipment for the standardisation of parts. | ||
| View original record | STANDARDISATION OF PARTS Est. cost of extra jigs, tools and equipment - nil. Could be brought on to production as soon as required. Completed 10,000 miles test on Chassis XM-23. Covered by letter… | ||
| img184 | Standardisation of controllable shock dampers, involving grooves in pistons and increased clearance for the valve damping disc. | ||
| View original record | COMPLETED 21.8.34. RR 755 (SH) (57312. 23-12-33) BM 3/640/2 40/50 STANDARDISATION of PARTS. Description of Parts. CONTROLLABLE SHOCK DAMPERS - GROOVES IN PISTONS & INCREASED CLEARANCE FOR THE VALVE… | ||
| img185 | Standardisation of parts instruction indicating no extra tool cost. | ||
| View original record | The document text is mirrored. Flipped Text Transcription: Top Right: MO.40180 / 22.9.22 Title: STANDARDISATION OF PARTS Top Left Box: OMN.V.TR. Left Box: TEST X Right Box: APPROVED - HAUGHTON… | ||
| img186 | Standardisation of rear shock dampers with strengthened main cylinders, smaller feet and increased diameter bolts. | ||
| View original record | COMPLETED 21.8.34. 40/50 STANDARDISATION of PARTS. Date 11.7.34. Description of Parts. REAR SHOCK DAMPERS WITH STRENGTHENED MAIN CYLINDERS WITH SMALLER FEET AND INCREASED DIA. BOLTS. X No. 7520.… | ||
| img187 | Cost estimate for extra jigs, tools, and equipment for the 'S' series. | ||
| View original record | STANDARDISATION of PARTS 0S/104 Est. cost of extra jigs, tools and equipment (Sft/Ws.22.6.34.) - £15.0.0. Already instructed for 'S' series. | ||
| img188 | Standardisation of parts document for an exhaust heat shield for magneto and aluminium wiring tubes. | ||
| View original record | RR 755 (SH) (57312. 29-12-33) BM 3/640/2 COMPLETED 13.9.34. 40/50 STANDARDISATION of PARTS. Date 20.7.34. X No. 6117. Description of Parts. EXHAUST HEAT SHIELD FOR MAGNETO WIRING TUBE, AND ALUMINIUM… | ||
| img189 | Estimated cost for extra jigs, tools, and equipment, and the feasibility of introducing them for the 'T' series chassis. | ||
| View original record | STANDARDISATION of PARTS 10560 Date 14.8.36 Ref. No. X Est. cost of extra jigs, tools and equipment - nil. Could be brought on to production at 1st chassis in 'T' series without scrap. | ||
| img190 | Standardisation of the 12/41 rear axle. | ||
| View original record | RR 75S (SH) (57312. 29-12-33) BM 3/640/2 COMPLETED 20.9.34. 40/50 STANDARDISATION of PARTS. Date 23.8.34. X No. 7350. Drawing No. Part List Description of Parts. 12/41 REAR AXLE. Origin. To reduce… | ||
| img191 | Report concerning the cost and production of the 55th chassis in the 'S' series. | ||
| View original record | STANDARDISATION OF PARTS 40150 X Est. cost of extra jigs, tools and equipment - Nil. Could be brought on to production at 55th chassis in 'S' series. Cost & scrap £200. Previously reported in… | ||
| img192 | Standardisation of the old camshaft to part E.80070 to increase valve gear silence. | ||
| View original record | RR 755 (SH) (57312, 29-12-33) BM 3/640/2 COMPLETED 26.9.34. 40/50 STANDARDISATION OF PARTS. Date 6.9.34. X No. 7090 Drawing No. Part List Description of Parts. OLD CAMSHAFT TO E.80070. Origin. To… | ||
| img193 | Estimate stating there is nil cost for extra jigs, tools and equipment for part standardisation. | ||
| View original record | STANDARDISATION OF PARTS Est. cost of extra jigs, tools and equipment - nil. Is already instructed for 51 in 'T' without scrap. | ||
| img194 | Standardisation of parts for an enlarged semi-expanding carburettor to maintain power output. | ||
| View original record | RR 785 (SH) (57512. 20-12-33) BM 3/640/2 COMPLETED 18.10.34. 40/50 STANDARDISATION of PARTS. Date 27.9.34. X No. 7080. Drawing No. Part List Description of Parts. SEMI-EXPANDING CARBURETTOR ENLARGED.… | ||
| img195 | Cost estimate for extra jigs, tools and equipment for the 51st chassis in the 'T' series. | ||
| View original record | STANDARDISATION OF PARTS FO/50 Est. cost of extra jigs, tools and equipment (Aft/WS.3.9.34) - £227.0.0. Already instructed for 51st chassis in "T" series. | ||
| img196 | Standardisation of parts document for the Bijur centralised lubrication tank. | ||
| View original record | RR 755 (SH) (57312. 29-12-33) BM 3/640/2 COMPLETED 3.11.34. 40/50 STANDARDISATION of PARTS. Date 5.10.34. X No. 3806. Description of Parts. BIJUR CENTRALISED LUBRICATION TANK. Drawing No. Part List… | ||
| img197 | Modification notice for a bought-out complete unit for the 'U' series chassis. | ||
| View original record | STANDARDISATION OF PARTS 40150 This modification comprises a complete unit bought from outside, therefore there will be no works tool cost involved. Could be brought on to production at 1st chassis in… | ||
| img198 | Standardisation of a new one-piece 12-volt battery in a moulded ebonite container. | ||
| View original record | RR 753 (SH) (57312, 29-12-33) DM 3/640/2 COMPLETED 3.12.34. 40/50 STANDARDISATION of PARTS. Date 5.11.34. X No. 6122. Drawing No. Part List Description of Parts. NEW ONE PIECE 12-VOLT BATTERY IN… | ||
| img199 | Modification notice stating it was fitted to the first chassis in the 'S' series. | ||
| View original record | STANDARDISATION OF PARTS (Mirrored) 40/20 X This modification was fitted at 1st Chassis in "S" series. Table Data: 10V DEXTER .26.11.2 MOW S-DEXTER .26.11. S 3K DEXTER .26.11.23 DR KA DEXTER .26.11.… | ||
| img200 | Standardisation of parts for pistons, deleting stops for scraper rings and making remaining ring stops in stainless steel. | ||
| View original record | RR 788 (SH) (57312. 29-12-33) BM 3/640/2 COMPLETED 3.12.34. 40/50 STANDARDISATION of PARTS. Date 5.11.34. X No. 7040. Drawing No. LOP. E79632 Part List LEG. 3676. E86463. Description of Parts. PISTONS… | ||
| img201 | Estimated cost and production timeline for extra jigs, tools, and equipment for the 'U' series chassis. | ||
| View original record | STANDARDISATION OF PARTS Est. cost of extra jigs, tools and equipment (Aft/WB.3).10.34) - £5.0.0. Could be brought on to production at 1st chassis in 'U' series. Br/GH.30.10.34, without scrap. | ||
| img202 | Standardisation report for a flexible exhaust mounting. | ||
| View original record | RR 755 (SH) (57312. 29-12-33) BM 3/640/2 COMPLETED 7.1.35. 40/50 STANDARDISATION of PARTS. Date 12.12.34. X No. 7230. Drawing No. L.o.C. 4042 Part List Description of Parts. Flexible Exhaust Mounting.… | ||
| img203 | Cost estimate for extra jigs, tools, and equipment and instruction for the 51st chassis in the 'T.2' series. | ||
| View original record | Est. cost of extra jigs, tools and equipment (Sft/Ws.23.10.34) £23.0.0. Already instructed for the 51st chassis in "T.2" series, without scrap (Sft/CH.23.10.34). | ||
| img204 | Standardisation of the flexible rear engine mounting. | ||
| View original record | RR 755 (SH) (57312. 29-12-33) BM 3/540/2 COMPLETED 30.1.35. 40/50 STANDARDISATION of PARTS. Date 12.1.35. X No. 7005. Drawing No. L60 Part List 4067 3946 4115 4061 4063 Description of Parts. FLEXIBLE… | ||
| img205 | Estimate for the cost of extra jigs, tools, and equipment, and the production start for the 'T.2' series chassis. | ||
| View original record | STANDARDISATION OF PARTS 40120 Est. cost of extra jigs, tools and equipment (Aft/Ws.7.12.34) - £225.0.0. Could be brought on to production at 51st chassis in "T.2" series. (Aft/GH.7.12.34) without… | ||
| img206 | Standardisation of parts to increase the initial load of shock dampers for cars with continental road springs. | ||
| View original record | RR 759 (SH) (57312. 29-12-33) BM 3/640/2 COMPLETED 30.1.35. 40/50 STANDARDISATION OF PARTS. Date 9.1.35. X No. 7520. Drawing No. Part List Description of Parts. INITIAL LOAD OF SHOCK DAMPERS TO BE… | ||
| img207 | Standardisation of parts report for a Lucas-C.A.V. Voltage Regulator, Type B2.C.J.1. | ||
| View original record | COMPLETED 13.2.35. 40/50 STANDARDISATION of PARTS. Date 17.1.35. Description of Parts. LUCAS-C.A.V. VOLTAGE REGULATOR, TYPE B2.C.J.1. X No. 6092. Drawing No. Part List Origin. To allow the dynamo to… | ||
| img208 | Standardisation of parts modification for bought-out items with no tool cost. | ||
| View original record | STANDARDISATION of PARTS P460 X This modification affects bought out parts only. No Works tool cost is involved. S3 Destgd. .29.4.21 ZS 10A Destgd. .22.1.21 ROW C Destgd. .08.1.21 C ML Destgd.… | ||
| img209 | Standardisation of a shorter propellor shaft to suit a new gearbox. | ||
| View original record | RR 755 (SH) (57312. 29-12-33) BM 3/640/2 COMPLETED 16.3.35. 40/50 STANDARDISATION of PARTS. Date 8.2.35. X No.7340. Drawing No.G51227. Part List Description of Parts. PROPELLOR SHAFT TO SUIT NEW… | ||
| img210 | Estimate for bringing the 51st chassis in 'D' series into production, noting no cost for extra tooling. | ||
| View original record | GH./S.8.DE STANDARDISATION OF PARTS 10780 X Dept. Est. cost of extra jigs, tools and equipment (Sft/Ws.20.10.34) Nil. Could be brought on to production at 51st chassis in 'D' series (Sft/GH.20.10.34)… | ||
| img211 | Standardisation of undersheets in connection with a new gearbox and engine mounting. | ||
| View original record | RR 78B (SH) (57312. 29-12-33) BM 3/640/2 COMPLETED 16.3.35 40/50 STANDARDISATION of PARTS. Date 8.2.35. Description of Parts. UNDERSHEETS IN CONNECTION WITH NEW GEARBOX AND ENGINE MOUNTING. Origin. To… | ||
| img212 | Cost estimation for extra jigs, tools and equipment, and production details for the 'T' series chassis. | ||
| View original record | SТЯАЧ ʇo ИOIТAƧIᗡЯAᗡИAТƧ 40180 X 4720 20.9.34 Est. cost of extra jigs, tools and equipment (Sft/Ws.20.9.34) Nil. Could be brought on to production at 51st chassis in 'T' series. (Sft/GH.20.9.34)… | ||
| img213 | Standardisation of a gearbox with synchromesh 2nd gear. | ||
| View original record | RR 755 (BH) (57312, 29-12-33) BM 3/640/2 COMPLETED 16.3.35. 40/50 STANDARDISATION of PARTS. Date: 7.2.35. X No. 7310. Drawing No. H. Sch. Part List: 3964/5/6 3984/5/6/7/8 4016/7/8 4002 3992/8 4140… | ||
| img214 | Cost comparison and production implementation analysis for a new part. | ||
| View original record | STANDARDISATION of PARTS 40/20 Est. cost of extra jigs, tools and equipment (Sft/Ws.20.10.34) £1514.0.0. Could be brought on to production at 51st chassis in 'T' series. (Sft/GH.20.10.34) without… | ||
| img215 | Standardisation of Lucas P-100 headlamps with ribbed front glass having a plain centre to improve distance visibility. | ||
| View original record | AR 755 (SHJ) (S7384. 30-1-34) BN 3/787/1. COMPLETED 29.3.35. 40/50 STANDARDISATION of PARTS. Date 22.3.35. X No. 6116. Drawing No. Part List Description of Parts. LUCAS P-100 HEADLAMPS WITH RIBBED… | ||
| img216 | Standardisation of Morganite EGO brushes on the dynamo. | ||
| View original record | AR 755 (SH) (57394. 30-1-34) SM 3/787/1. COMPLETED 15.4.35. 40/50 STANDARDISATION of PARTS. Date 28.3.35. Description of Parts. MORGANITE EGO BRUSHES ON DYNAMO. X No. 6093. Drawing No. Part List… | ||
| img217 | The estimated cost and production implementation for the standardisation of parts. | ||
| View original record | STANDARDISATION of PARTS 40/20 Est. cost of extra jigs, tools and equipment (Eft/Ms.12.3.35) NIL. Could be brought on to production at 26th chassis in U2 series (Eft/CH.12.3.35) without scrap. | ||
| img218 | Standardisation of an A.T. Speedometer with larger figures on the mileage disc and a shrouded magnet. | ||
| View original record | RR 785 (SH) (57394. 30-1-34) RM 3/787/1 COMPLETED 8.5.35. 40/50 STANDARDISATION OF PARTS. Date 16.4.35. Drawing No. X No.6051. Part List Description of Parts. A.T. Speedometer with Larger Figures on… | ||
| img219 | Estimated cost of extra jigs, tools and equipment for production of the 36th chassis in 'D' series. | ||
| View original record | STANDARDISATION OF PARTS DFW Est. cost of extra jigs, tools and equipment (Bft/WB.19.3.35) £112.0.0. (& X.No.6033 - 40/50). Could be brought on to production at the 36th chassis in 'D' series,… | ||
| img220 | Standardisation of instruments with concave dials and modified form of slot illumination to improve lighting. | ||
| View original record | COMPLETED 8.5.35 40/50 STANDARDISATION of PARTS. Date 16.4.35. X No. 6033. Drawing No. Part List Description of Parts. INSTRUMENTS WITH CONCAVE DIALS AND MODIFIED FORM OF SLOT ILLUMINATION. MODIFIED… | ||
| img221 | Standardisation sheet cross-referencing to another document for the 40/50 HP model. | ||
| View original record | STANDARDISATION OF PARTS 40136 Details of this Std. Sheet are included on X.No.8051 - 40/50 HP. | ||
| img222 | Standardisation of Cornercroft wing lamps, noted as having a better appearance than the Lucas wing lamps. | ||
| View original record | RR 758 (SH) (57394. 30-1-34) BM 3/787/1. COMPLETED 14.7.36. 40/50 H.P. II STANDARDISATION of PARTS. Date 15.6.36 X No. 6116 Drawing No. Part List Description of Parts. CORNERCROFT WING LAMPS. Origin.… | ||
| img223 | Notification regarding the status of bought-out parts. | ||
| View original record | STANDARDISATION of PARTS X Bought Out Parts. Works Not affected. | ||
| img224 | Standardisation of parts for Lucas Headlamps Type P.100.R. | ||
| View original record | RR 752 (SH) (57394. 30-1-34) BM 3/757/1. COMPLETED 14.7.36. 40/50 H.P. III STANDARDISATION of PARTS. Date 13.6.36. X No. 6116. Drawing No. Part List. Description of Parts. LUCAS HEADLAMPS TYPE… | ||
| img225 | Modification sheet for the standardisation of B.O. parts, noting no works tool cost is involved. | ||
| View original record | Header (inverted): STANDARDISATION of PARTS This modification affects B.O. Parts. No works tool cost is involved. [The lower half of the document contains a table with illegible content.] | ||
| img226 | Standardisation of parts for a rubber mounting for a petrol pump. | ||
| View original record | RR 785 (5M) (57394. 30-1-34) BM 3/787/1 48/50 STANDARDISATION of PARTS. COMPLETED 14.7.36. Date 15.4.36. X No.1263. Drawing No. Lec. 4990 Part List Description of Parts. RUBBER MOUNTING FOR PETROL… | ||
| img227 | Cost analysis for tools on Standardisation Sheet No: 1263 for the 25/30 HP model. | ||
| View original record | STANDARDISATION of PARTS OROD 28 FEV X Cost of tools included in Standardisation Sheet No: 1263 - 25/30 HP. Could be brought on to production at the 1st chassis in "B" series. (sft/GH.6.4.36.) without… | ||
| img228 | Standardisation of the Radiator Matrix in Marston Mark VI block. | ||
| View original record | RR 785 (SH) (57394. 30-1-34) BM 3/787/1 COMPLETED 25.8.36. Ph. III x40/50 STANDARDISATION of PARTS. Date 6.7.36. Description of Parts. Radiator Matrix in Marston Mark VI block. X No. 340 Drawing No. E… | ||
| img229 | Estimated cost of extra jigs, tools, and equipment and their production availability. | ||
| View original record | STANDARDISATION OF PARTS 023020 Est. cost of extra Jigs, Tools and eqipment (Sft/Ws.23.6.36.Nil.). Could be brought on to production as soon as available (Sft/GH.24.6.36.). | ||
| img230 | Standardisation document for repositioning the petrol filter to assist coachbuilders. | ||
| View original record | AR 755 (SHJ) (57394, 30-1-34) BM 3/787/1. COMPLETED 28.8.36. PH. III K40/50 STANDARDISATION of PARTS. Date 4.7.36. Description of Parts. PETROL FILTER IN THE REAR POSITION ON THE 2nd CROSS MEMBER,… | ||
| img231 | Cost analysis for parts standardisation, showing savings and estimated costs for new equipment. | ||
| View original record | STANDARDISATION OF PARTS 0210P Estimated cost of extra Jigs, Tools and Equipment (Sft/Ws16.6.36.£12.Os.Od.). Could be brought on to production on the 1st chassis in "B" Series (Sft/Gh.24.6.36.).… | ||
| img232 | Standardisation of parts document regarding the altered position of an anti-rattle felt collar for steering controls. | ||
| View original record | AR 75S (SH) (S7394. 30-1-34) SM 3/787/1 (COMPLETED, 25.9.36) Ph.III 40/50 STANDARDISATION OF PARTS. Date 2.7.36. X No. 350 Drawing No. LEC. Part List 4809 Description of Parts. ALTERED POSITION OF… | ||
| img233 | Cost estimate for extra jigs, tools, and equipment for the 'B' series chassis production. | ||
| View original record | STANDARDISATION OF PARTS WORKS Est. cost of extra jigs, tools and equipment (Sft/WS.17.6.36.) £44.0.0d. Could be brought on to production at 1st. chassis in "B" series (Sft/GH.15.6.36.) without scrap. | ||
| img234 | Standardisation of the outside filler on the petrol tank. | ||
| View original record | RR 785 (SH) (57394. 30-1-34) BM 3/787/1. COMPLETED 27.8.36. Ph. 11 40/50 STANDARDISATION of PARTS. Description of Parts. OUTSIDE FILLER ON THE PETROL TANK. Origin. Accessibility, and avoiding fumes in… | ||
| img235 | Cost analysis for a production change to be implemented on the 'B' series chassis. | ||
| View original record | STANDARDISATION of PARTS Est. cost of extra Tools, Jigs and Equipment (£30 Sft/WS.19.6.36.) Could be brought on to production at the 1st chassis in "B" series (SFT/CH.26.6.36.). (Without scrap).… | ||
| img236 | Standardisation of parts for steering gear boxes, changing from malleable iron instead of bronze. | ||
| View original record | RR 785 (SH) (57394. 30-1-34) EM 3/787/1. COMPLETED 4.9.36. 40/50 Ph. III STANDARDISATION of PARTS. Date 19.8.36 X No. 350 Drawing No. Part List Description of Parts. STEERING GEAR BOXES, F.67098/9 IN… | ||
| img237 | Cost analysis calculating the net savings of introducing new parts for production on the 'B' series chassis. | ||
| View original record | STANDARDISATION of PARTS AD120 Estimated cost of extra Jigs, Tools and Equipment NIL. (AFT/WE.13.7.36.). Could be brought on to production at the first Chassis in "B" series (without scrap)… | ||
| img238 | Standardisation of an oil scoop on the gearbox 3rd motion shaft. | ||
| View original record | AR 755 (SH) (69654. 19-9-34) BM 3/1832/5. COMPLETED 15.9.36 Ph. III 40/50 STANDARDISATION of PARTS. Date 3.9.36. X No. 328. Drawing No. SCH 4685 Part List Description of Parts. OIL SCOOP ON GEARBOX… | ||
| img239 | Cost estimation for extra Jigs, Tools, and Equipment for production on the 'B' series chassis. | ||
| View original record | STANDARDISATION of PARTS +0150 Est. cost of extra Jigs, Tools and Equipment £103 (Sft/Ws.26.8.36.) Could be brought on to production at the 101st Chassis in "B" series (Without scrap) Sft/GH.26.8.36.)… | ||
| img240 | Standardisation of Ferodo S.5805 brake linings on all brakes, including the hand brake. | ||
| View original record | AR 755 (SH) (69654. 19-9-34) SM 3/1032/S. COMPLETED 15.9.36. PH.III 40/50 STANDARDISATION of PARTS. Date 25.8.36. X No. 306 Drawing No. Part List Description of Parts. FERODO S.5805 ON ALL BRAKES… | ||
| img241 | Estimate for the cost and production start for extra jigs, tools, and equipment for the 'B' series chassis. | ||
| View original record | STANDARDISATION of PARTS O204 Estimated cost of extra Jigs, Tools and Equipment £40 (Bft/GL.10.8.36.) Could be brought on to production at the first Chassis in "B" series (Bft/GL.21.8.36.) | ||
| img242 | Standardisation of Phantom III brake drums from R.R. Cylinder Iron instead of Millerite to reduce cost. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 15.9.36. PHANTOM III. STANDARDISATION of PARTS Description of Parts. BRAKE DRUMS IN R.R. CYLINDER IRON INSTEAD OF MILLERITE. Origin. To reduce cost. Report… | ||
| img243 | Proposal for the standardization of parts for the Phantom III 'B' series chassis, noting nil cost for extra equipment. | ||
| View original record | STANDARDISATION of PARTS PHANTOM III X Estimated cost of extra Jigs, Tools and Equipment NIL (Sft/Ws.10.8.36.). Could be brought on to production at the first Chassis in "B" series (Sft/GH.21.8.36.).… | ||
| img244 | Standardisation of a large rear spring front anchorage bracket suitable for conversion to rubber shackles. | ||
| View original record | RR 755 (SH) (69654. 19-9-34) BM. 3/1632/5. COMPLETED 2.10.36. 40/501 STANDARDISATION of PARTS. Date 23.9.36. X No. 346. Drawing No. C.8084. Part List Description of Parts. LARGE REAR SPRING FRONT… | ||
| img245 | Cost comparison and analysis for a new part to be introduced on the 'B' series chassis. | ||
| View original record | STANDARDISATION of PARTS Date X Est. cost of extra Jigs, Tools and Equipment 4153 (Sft/VB.27.8.36.) Could be brought on to production at the first chassis in "B" series (Sft/GL.5.9.36.) Material £. s.… | ||
| img246 | Standardisation of the rubber part between the rear springs and rear axle to reduce tyre noise. | ||
| View original record | RR 785 (BH) (69654. 19-9-34) RM. 3/1832/5. Ph.III. 40/50 COMPLETED 7.10.36. STANDARDISATION OF PARTS. Date 7.9.36. X No. 346 Drawing No. 68485/6 Part List Description of Parts. RUBBER BETWEEN REAR… | ||
| img247 | Cost analysis document for the standardization of a part for the 'B' series chassis. | ||
| View original record | STANDARDISATION of PARTS Est. cost of extra Jigs, Tools and Equipment £153 (sft/WB.27.8.36). Could be brought on to production at the first Chassis in "B" series (sft/GH.3.9.36). Material Labour… | ||
| img248 | Standardisation of Tinman's headed solid copper rivets for fixing Ferodo to brake shoes. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 30.11.36. PHANTOM III. STANDARDISATION of PARTS Description of Parts. TINMAN'S HEADED SOLID COPPER RIVETS FOR FIXING FERODO TO BRAKE SHOES. Origin. To… | ||
| img249 | Standardization of parts proposal for Phantom III, including an estimated cost for extra jigs and equipment. | ||
| View original record | PHANTOM III STANDARDIZATION OF PARTS A.W.E 327/92 DATE 26.11.36 [Stamp]: 30.11.36 [Stamp]: X Issued 6Z Est. cost of extra jigs, and equipment (Sft/No.26.10.36) £12.0.0. All the parts affected are… | ||
| img250 | Standardisation of a modified H.T. rotor on the distributor for the Phantom III. | ||
| View original record | RR 755 (SH) 20396 21/7/36 J.W.S. COMPLETED 9.12.36. PHANTOM III. STANDARDISATION of PARTS Date 26.11.36. X No. 6119 Drawing No. Part List Description of Parts, MODIFIED H.T. ROTOR ON DISTRIBUTOR… | ||
| img251 | Estimate for the cost of new tools for the 'CW' series chassis. | ||
| View original record | PHANTOM III STANDARDISATION OF PARTS Estimated cost of new tools £10.0.0. X Could be brought on to production at the first chassis in "CW" series To replace Experimental T. Assembled unless otherwise… | ||
| img252 | Standardisation report for the Phantom III 'Concertina' 3rd speed coupling. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 9.12.36. PHANTOM III. STANDARDISATION of PARTS Date 26.11.36. X No. 328 Drawing No. N.Sch.4894 Part List Description of Parts. "CONCERTINA" 3 rd SPEED… | ||
| img253 | Estimated cost of extra jigs, tools and equipment for the 'C' series chassis. | ||
| View original record | PHANTOM III STANDARDISATION OF PARTS Estimated cost of extra jigs, tools and equipment (Sft/Ws.20.11.36) £32.0.0. Could be brought on to production at the 1st. chassis in "C" series (Sft/GH.10.11.36)… | ||
| img254 | Standardisation of Phantom III exhaust system to replace Staybrite exhaust lag with nickel-plated mild steel to save cost. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 19.12.36. PHANTOM III. STANDARDISATION OF PARTS Date 27.11.36. X No. 323 Drawing No. Part List Description of Parts. PHANTOM III EXHAUST SYSTEM. REPLACE… | ||
| img255 | Standardisation of parts for the Phantom III model, detailing nil new tool costs and order series. | ||
| View original record | CONFIDENTIAL. NOT TO BE COMMUNICATED OUTSIDE THE FIRM. PHANTOM III STANDARDISATION of PARTS Description of Part Part No. E.S.S Drawn by Traced Altd. Estimated cost of new tools - NIL. Ordered to the… | ||
| img256 | Standardisation of a dynamo cut-out with double contacts for the Phantom III, to reduce volt-drop and overheating. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 1.2.37. PHANTOM III. STANDARDISATION of PARTS Date 15.1.37. No. 6142 Drawing No. Part List Description of Parts. DYNAMO CUT-OUT WITH DOUBLE CONTACTS TO… | ||
| img257 | Cost estimation for the standardisation of parts on the Phantom III chassis. | ||
| View original record | C.S.I. COMMITTEE PHANTOM III STANDARDISATION OF PARTS Estimated cost of new tools approximately £1.3.0. Assuming this feature is standardised on all three types of chassis. [X] Could be brought in to… | ||
| img258 | Standardisation of leather washers on the rear brake bell crank levers for the Phantom III. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 1.2.37. PHANTOM III. STANDARDISATION of PARTS Date 15.1.37. X No. 306. Drawing No. H.-ph. Part List 4778 Description of Parts. LEATHER WASHERS ON REAR BRAKE… | ||
| img259 | Cost estimation for new tools related to the standardization of parts for the Phantom III 'D' Series chassis. | ||
| View original record | PHANTOM III STANDARDISATION OF PARTS Estimated cost of New Tools - £10.0.0. Could be brought on to production at the 1st. Chassis in "D" Series (without scrap). COST TABLE: | | MATERIAL | LABOUR |… | ||
| img260 | Standardisation of a split upper ball pad in the cross steering tube joint for the Phantom III to prevent low speed wobbles. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 1.2.37. PHANTOM III. STANDARDISATION of PARTS Date 15.1.37. X No. 350 Drawing No. G.84934 G.84938 Part List G.84938 Description of Parts. SPLIT UPPER BALL… | ||
| img261 | Standardisation of parts for the Phantom III, instructing new parts for the 'B' Series. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS Estimated cost of new tools £4.0.0. New Parts instructed for "B" Series. [Text from reverse of page, inverted and showing through] MATERIAL LABOUR CHARGES TOTAL a… | ||
| img262 | Standardisation of Parts form for the Phantom III, detailing the addition of holes in the cross frame. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 23.2.37. PHANTOM III. STANDARDISATION of PARTS Description of Parts. HOLES IN CROSS OF FRAME. Origin. To enable clutch cover studs to be with-drawn without… | ||
| img263 | Standardisation parts list for the Phantom III 'C' series chassis. | ||
| View original record | A.W.G 28/7/37 ME/MS PHANTOM III STANDARDISATION PARTS SS.J.21. Extra tool cost .... Nil. Could be brought on to production at the 1st. chassis in "C" series (without scrap). Report to Experimental.… | ||
| img264 | Standardisation of parts form for carbon graphitic bearings on the Phantom III electric petrol gauge. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 15.3.37. PHANTOM III. STANDARDISATION of PARTS Description of Parts. CARBON GRAPHITIC BEARINGS ON SMITH ELECTRIC PETROL GAUGE. Origin. To avoid spindle… | ||
| img265 | Standardisation of parts document for the Phantom III chassis, noting no extra tool cost for 'C' series production. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS Extra tool cost nil. Could be brought on to production at the 1st. chassis in "C" series (without scrap). This applies to chassis d-IV-10f for 10,000 miles and… | ||
| img266 | Standardisation of parts regarding the clearance between inlet valves and guides. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 25.3.37. PHANTOM III. STANDARDISATION of PARTS Date 16.3.37. X No. 354. Drawing No. Part List Description of Parts. CLEARANCE BETWEEN INLET VALVES AND… | ||
| img267 | Production note for a 'C' series chassis part, stating no new tool cost is required. | ||
| View original record | PHANTOM III. STANDARDISATION Estimated tool cost nil. Could be brought on to production at the 1st. chassis in 'C' series (without scrap). --- [The following text is reversed bleed-through from the… | ||
| img268 | Standardisation of parts for the Phantom III, concerning 1' extra clutch pedal travel to lighten clutch pedal pressure. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 25.3.37. PHANTOM III. STANDARDISATION of PARTS Date: 16.3.37. X No. 312. Drawing No. Part List: Sch. 5004. Description of Parts: 1" extra clutch pedal… | ||
| img269 | Cost estimation for new tools and production notes for the 'D' series chassis. | ||
| View original record | CONTINUED. S.P. 513 PHANTOM III STANDARDISATION OF PARTS Estimated cost of new tools £2.0.0. Could be brought on to production at the 1st. chassis in "D" series (without Scrap). TABLE COLUMNS:… | ||
| img270 | Standardisation of K.L.G. 'Corundite' plugs (Type FE.30X) for the Phantom III. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 20.4.37 PHANTOM III. STANDARDISATION of PARTS Date 13.4.37. X No. 6001B. Drawing No. Part List Description of Parts. K.L.G. "CORUNDITE" PLUGS TYPE FE.30X.… | ||
| img271 | Standardization of parts directive for the Phantom III model. | ||
| View original record | Header: PHANTOM III STANDARDISATION OF PARTS Extra tool cost Nil. To be brought on to production immediately. Cost Table: Column Headers: MATERIAL, LABOUR, CHARGES, TOTAL Row Headers: Cost of old… | ||
| img272 | Standardisation of a stiffener plate for the copper contacts on the Phantom III starter switch to prevent failure. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 20.4.37. PHANTOM III. STANDARDISATION of PARTS Date 12.4.37. X No. 6139. Drawing No. Part List Description of Parts. STIFFENER PLATE FOR COPPER CONTACTS ON… | ||
| img273 | Standardisation of parts document for the Phantom III, detailing tool costs and production implementation. | ||
| View original record | AWI/WTA/MHS 26.2.35 PHANTOM III. STANDARDISATION of PARTS. Description of Part Original Report by Technical Dept. Extra tool cost £11. X C.M.S 22/4 Could be brought on to production at the 1st chassis… | ||
| img274 | Standardisation of parts form for a filter gauze between the radiator bottom tank outlet and pump. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 28.4.37. PHANTOM III. STANDARDISATION of PARTS Date: 16.4.37. Description of Parts. FILTER GAUZE BETWEEN RADIATOR BOTTOM TANK OUTLET AND PUMP. X No. 1269.… | ||
| img275 | Assessment for implementing a change on the 'C' series chassis at no extra tool cost. | ||
| View original record | PHANTOM III STANDARDISATION OF PARTS Extra tool cost Nil. Could be brought on to production at the 1st. chassis in "C" series (without scrap). Cost Table Headers: MATERIAL, LABOUR, CHARGE, TOTAL… | ||
| img276 | Standardisation of a hand brake lever with increased travel for the Phantom III. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 26.4.37. PHANTOM III. STANDARDISATION of PARTS Description of Parts. HAND BRAKE LEVER WITH INCREASED TRAVEL. Origin. To increase the power of the parking… | ||
| img277 | Cost estimate for new tools for the 'D' series chassis production. | ||
| View original record | Forward-facing text: A.W.L. M.L.W. R.W.H. H.J.S. WT.S.T. 11.4.38. 30£ Estimated cost of new tools £99.0.0. W.125A. Could be brought on to production at the 1st. chassis in "D" series (without scrap).… | ||
| img278 | Standardisation of bell cranks with increased travel for the Phantom III front brake operation. | ||
| View original record | RR 755 (10H) 38137 7-4-37 WHK 26070 COMPLETED 25.5.37. PHANTOM III STANDARDISATION of PARTS. Date 10.5.37. X No. 306. Drawing No. N.Sch.49 Part List 15. Description of Parts: BELL CRANKS WITH… | ||
| img279 | Parts standardisation document for the Phantom III, estimating the cost of new tools for the 'C' series chassis. | ||
| View original record | COMBINED Sheet 2 of 2. FC. PHANTOM III STANDARDISATION of PARTS Description of Proposal Date: 10.9.36 Drawing No.: F.2003 X Ref No.: M.894/36-10- Part No.: Estimated cost of new tools £11.0.0. Could… | ||
| img280 | Standardisation of Phantom III water connections, changing the water joint washer material to Klingerite. | ||
| View original record | RR 755 (10H) 38137 7-4-37 WHK 26070 COMPLETED 1.6.37. PHANTOM III STANDARDISATION of PARTS. Description of Parts: WATER CONNECTIONS - (1) RUBBER HOSE CONNECTIONS SUPPLIED BY LEYLAND & BIRMINGHAM… | ||
| img281 | Parts standardisation document for the Phantom III, detailing a production change with no extra tool cost. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS Date: 16.2.37 Ref. No.: S.P.C. 33/7 Extra tool cost Nil. Could be brought on to production at the 1st chassis in "E" series (without scrap). MATERIAL LABOUR… | ||
| img282 | Standardisation of parts report for a Phantom III non-return ball valve and oil relief valve housing. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 1.6.37. PHANTOM III. STANDARDISATION OF PARTS Date 3.5.37. Description of Parts. Housing of non return ball valve & seat and oil relief valve. No. 354.… | ||
| img283 | Standardisation of parts document for the Phantom III, detailing a modification to a valve. | ||
| View original record | R.W.T. REPLIES NOS (98) (68) & (5) PHANTOM III STANDARDISATION of PARTS Description of Part Estimated cost of new tools .........£8.0.0. Could be brought on to production at the 1st chassis in "D"… | ||
| img284 | Standardisation of the Phantom III Tappet Oil Filter to resolve dismantling difficulties. | ||
| View original record | RR 755 (5H) 20396 21/7/36 J.W.S. COMPLETED 1.6.37. PHANTOM III. STANDARDISATION of PARTS Date 30.4.37. Description of Parts. TAPPET OIL FILTER. X No. 1179. Drawing No. Leg.555D. Part List Origin.… | ||
| img285 | Cost estimation for new tools related to the standardisation of parts for the Phantom III. | ||
| View original record | COMPLETED A.W.I. NOTED S.M.R. M.L.E. PHANTOM III. STANDARDISATION of PARTS. No. RC.S.33 Date 22.9.36 Estimated cost of new tools £.3.0.0. Could be brought on to production at the 1st. chassis in "B"… | ||
| img286 | Standardisation of stiffer rear axle shafts for the Phantom III to improve the clutch. | ||
| View original record | RR 755 (10H) 38137 7-4-37 WHK 26070 COMPLETED 11.6.37. PHANTOM III STANDARDISATION of PARTS. Date 27.5.37. X No. 302. Drawing No. Part List Description of Parts: STIFFER REAR AXLE SHAFTS TO DRAWING… | ||
| img287 | Cost estimation and production planning document for the standardization of parts on the Phantom III. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS Estimated cost of new tools .............£48.0.0. Could be brought on to production at the 16th chassis in G series (without scrap). TABLE 1: Headers: MATERIAL,… | ||
| img288 | Standardisation of a spring for cross steering tube ball joints to exert a higher load. | ||
| View original record | RR 755 (10M) 38137 7-4-37 WHK 26070 COMPLETED 10.7.37. PHANTOM III STANDARDISATION of PARTS. Date: 23.6.37 X No.: 350. Drawing No.: Rm.254. Part List Description of Parts: SPRING FOR CROSS STEERING… | ||
| img289 | Assessment for the standardization of parts for the Phantom III, noting zero tool cost. | ||
| View original record | PHANTOM III STANDARDIZATION OF PARTS Estimated tool cost nil. Could be brought on to production at the 1st. chassis in "E" series (without scrap). TABLE COLUMNS: MATERIAL £ s d LABOUR £ s d CHARGES £… | ||
| img290 | Standardisation of Phantom III R.R.36 Main Bearing Shims. | ||
| View original record | RR 755 (10M) 38137 7.4.37 WHK 26070 COMPLETED 30.6.37. PHANTOM III STANDARDISATION of PARTS. Date 17.6.37. X No. 1020. Description of Parts: R.R.36 Main Bearing Shims. Origin: Satisfactory adoption on… | ||
| img291 | The estimated cost of new tools for the Phantom III series. | ||
| View original record | PHANTOM III STANDARDIZATION of PARTS Estimated cost of new tools £15.0.0. Could be brought on to production at the 1st. chassis in E series (without scrap). TABLE HEADERS (inverted): MATERIAL LABOUR… | ||
| img292 | Standardisation of parts report for the Phantom III concerning an ignition ballast resistance. | ||
| View original record | RR 735 (10H) 38137 7-4-37 WHK 26070 COMPLETED 30.6.37. PHANTOM III STANDARDISATION of PARTS. Date 17.6.37. X No. 6145. Drawing No. Part List Description of Parts: IGNITION BALLAST RESISTANCE WOUND… | ||
| img293 | Standardization of parts document detailing estimated tool costs and production schedules. | ||
| View original record | PHANTOM III STANDARDISATION OF PARTS Estimated tool cost Nil. Could be brought on to production at the 1st. chassis in "E" series onwards (without scrap). MATERIAL LABOUR CHARGES TOTAL £ s d £ s d £ s… | ||
| img294 | Standardisation of a steady bracket for the ignition control tube on the Phantom III. | ||
| View original record | RR 755 (10M) 38137 7-4-37 WHK 26070 COMPLETED 23.8.37. PHANTOM III STANDARDISATION of PARTS. Date: 3.8.37. X No. 300. Drawing No. LMC.4549 Part List: - Description of Parts: STEADY BRACKET FOR… | ||
| img295 | Cost estimation for new tools for the Phantom III 'D' series chassis production. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS. Estimated cost of new tools £36.0.0. Could be brought on to production at the 1st chassis in "D" series (without scrap). Top Left Box: Date: 2.9.35 Ref.: On X… | ||
| img296 | Standardisation of parts report for the Phantom III, regarding the ventilation of the ignition governor to prevent corrosion. | ||
| View original record | RR 755 (10H) 35137 7-4-37 WHK 26070 COMPLETED 23.8.37. PHANTOM III STANDARDISATION of PARTS. Date 7.6.37. X No. 6013. Drawing No. Part List Description of Parts: VENTILATION OF IGNITION GOVERNOR TO… | ||
| img297 | Cost estimation for new tools related to the standardization of Phantom III parts. | ||
| View original record | PHANTOM III STANDARDIZATION OF PARTS S.A.P. No. Estimated cost of new tools £5.0.0. Could be brought on to production immediately (without Scrap) MATERIAL | LABOUR | CHARGES | TOTAL £ s d | £ s d | £… | ||
| img298 | Standardisation of screw threaded synchromesh cones for the Phantom III. | ||
| View original record | RR 755 (10H) 38137 7-4-37 WHK 26070 COMPLETED 21.8.37. PHANTOM III STANDARDISATION of PARTS. Date: 10.7.37 X No. 328. Drawing No. Part List Description of Parts: SCREW THREADED SYNCHROMESH CONES. 9°… | ||
| img299 | Cost estimate for new tooling for 'E' series chassis production. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS Estimated cost of new tools £45.0.0d. Could be brought on to production at the 1st. chassis in "E" series (without scrap). TABLE 1 (headers are printed in… | ||
| img300 | Standardisation of an ignition coil with reversed primary connections for the Phantom III. | ||
| View original record | RR 755 (10H) 38137 7-4-37 WHK 26070 COMPLETED 21.8.37 PHANTOM III STANDARDISATION of PARTS. Date: 2.8.37 X No. 6013 Drawing No. Part List Description of Parts: IGNITION COIL WITH REVERSED PRIMARY… | ||
| img301 | Standardisation of parts form for the Phantom III 'D' series chassis. | ||
| View original record | PHANTOM III STANDARDISATION OF PARTS EDITION WITH CHROME RADIATOR SHELL MODIFICATIONS (D.J. Dept. X) Extra Tool Cost Nil. Could be brought on to production at the 1st. Chassis in 'D' series (without… | ||
| img302 | Standardisation of Phantom III front suspension fulcrum pins and Bijur pipe coil to simplify machining and reduce costs. | ||
| View original record | RR 755 (10H) 38137 7-4-37 WHK 26070 COMPLETED 21.8.37. PHANTOM III STANDARDISATION of PARTS. Date 3.8.37. X No. 1184. Drawing No. N.Sch. 4907 Part List G.84953 to G.84955 Description of Parts: FRONT… | ||
| img303 | Estimate for the cost of new tools for production on the 1st chassis in the 'E' series. | ||
| View original record | [Upside down text] PHANTOM III STANDARDISATION of PARTS W.E.S/C.D/ 15.8.33. Estimated cost of new tools £9.0.0d. Could be brought on to production at the 1st. chassis in "E" series (without scrap)… | ||
| img304 | Standardisation of parts for the Phantom III, concerning the propellor shaft sliding joint at the rear of the shaft. | ||
| View original record | COMPLETED 23.8.37. RR 755 (10H) 38137 7.4.37 WHK 26070 PHANTOM III STANDARDISATION OF PARTS. Date: 3.8.37. X No. 337. Drawing No. Part List Description of Parts: PROPELLOR SHAFT SLIDING JOINT AT REAR… | ||
| img305 | The standardisation of parts for the Phantom III, confirming no extra tool cost is required. | ||
| View original record | PHANTOM III STANDARDISATION OF PARTS PLANT NO. Extra tool cost Nil. Could be brought on to production at the 1st chassis in "D" series (without scrap). Condition RAG 000,000 on CC-X9 in series.… | ||
| img306 | Standardisation of Phantom III filter body, filter gauze, and filter chamber plug. | ||
| View original record | RR 755 (10H) 38137 7-4-37 WHK 26070 COMPLETED 21.8.37. PHANTOM III STANDARDISATION OF PARTS. Date 17.6.37. X No. 1138. Drawing No. E.87324 Part List H.6080 Description of Parts: P.III FILTER BODY,… | ||
| img307 | Standardization of parts proposal for the Phantom III, including tool cost estimate and production notes. | ||
| View original record | PH/ZNW PHANTOM III STANDARDIZATION OF PARTS. Estimated cost of new tools £3.0.0. Could be brought on to production at the 1st. Chassis in "E" series (without scrap.. TABLE: | MATERIAL | LABOUR |… | ||
| img308 | Standardisation of Phantom III shock absorber rod controls to replace the 'Arens' control. | ||
| View original record | COMPLETED 28.6.37. PHANTOM III STANDARDISATION of PARTS. Date 11.6.37. X No. 342. Drawing No. LeC. Part List 5498. Description of Parts: SHOCK ABSORBER ROD CONTROLS TO REPLACE "ARENS" CONTROL. Origin:… | ||
| img309 | Cost estimate and production plan for new tooling for standardisation of parts on the Phantom II 'C' series chassis. | ||
| View original record | PHANTOM II STANDARDISATION of PARTS Estimated cost of new tools £108.0.0. Could be brought on to production at the 101st chassis in "C" series (without scrap). (Faint mirrored text decodes as: The… | ||
| img310 | Standardisation of parts for the Phantom III, 4 port cylinder head. | ||
| View original record | RR 755 (10H) 38137 7.4.37 WHK 26070 COMPLETED 26.8.37. PHANTOM III STANDARDISATION of PARTS. Date 16.7.37. X No. 319. Drawing No. E.88908. Part List Description of Parts: 4 PORT CYLINDER HEAD. Origin:… | ||
| img311 | Estimate for the cost of new tools for the 'D' series chassis production. | ||
| View original record | PART No. III STANDARDISATION of PARTS Ref. No. TC./1 Date 25.8.35 [X] Estimated cost of new tools £362. 0. 0. Could be brought on to production at the 1st. chassis in "D" series (without scrap).… | ||
| img312 | Specification document for the standardisation of a 4 port head, detailing alterations. | ||
| View original record | SPECIFICATION FOR STANDARDISATION OF 4 PORT HEAD. To detailed instructions By/CS.1/EH.2.3.37. with the following alternations. E.88447 exhaust valves (strengthened) E.88782 Inlet valves (solid) Water… | ||
| img313 | Standardisation of parts for a Phantom III throttle control spring. | ||
| View original record | RR 755 (10H) 38137 7-4-37 WHK 26070 COMPLETED 2 6.8.37. PHANTOM III STANDARDISATION of PARTS. Date 2.8.37. X No. 308. Drawing No. Part List Description of Parts: E.38488 spring throttle control… | ||
| img314 | Cost estimation for new tools for the 'L' series chassis production. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS COMPLETED S.O. 16.3.3 Estimated cost of new tools £30. Could be brought on to production at the 1st. chassis in "L" series (without scrap). MATERIAL LABOUR CHARGES… | ||
| img315 | Standardisation of parts for the Phantom III, concerning hydraulic jacks, rams with loose rubbers, and standard D.W.S. pump. | ||
| View original record | RR 755 (10H) 38137 7-4-37 WHK 26070 COMPLETED 7.9.37. PHANTOM III STANDARDISATION of PARTS. Date: 23.8.37 No. 1166. Drawing No. Part List Description of Parts: HYDRAULIC JACKS. Rams with loose… | ||
| img316 | Standardisation of parts for the Phantom III, regarding production of the 26th 'D' series chassis. | ||
| View original record | PHANTOM III STANDARDISATION OF PARTS Extra tool cost Nil. Could be brought on to production at the 26th Chassis in 'D' series (without scrap). MATERIAL | LABOUR | CHARGES | TOTAL £ s d | £ s d | £ s d… | ||
| img317 | Standardisation of Johnson & Phillip's 'Neoprene' ozone-resisting H.T. ignition cable for the Phantom III. | ||
| View original record | COMPLETED 7.9.37. PHANTOM III STANDARDISATION of PARTS. Date 7.7.37. X No. 6110. Drawing No. Part List Description of Parts: JOHNSON & PHILLIP'S "NEOPRENE" OZONE RESISTING H.T. IGNITION CABLE. Origin:… | ||
| img318 | Zero extra tool cost for part standardisation on the Phantom III 'E' series chassis. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS Old no. X Drawing no. Extra tool cost - Nil. Could be brought on to production at the 1st. chassis in 'E' series (without scrap). TABLE 1: Headers (mirrored):… | ||
| img319 | Standardisation of the water temperature thermometer with flexible capillary for the Phantom III. | ||
| View original record | RR 755 (10H) 38137 7-4-37 WHK 26070 COMPLETED 7.9.37. PHANTOM III STANDARDISATION of PARTS. Date 16.8.37 X No. 6003. Drawing No. D.15953 Part List Description of Parts: WATER TEMP. THERMOMETER WITH… | ||
| img320 | Cost and production analysis for the standardization of parts for the Phantom III Z series chassis. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS Ref No. 26/Z X Extra tool cost Nil. Could be brought on to production at the 1st. chassis in Z series (without scrap). MATERIAL LABOUR CHARGES TOTAL £ s d £ s d £… | ||
| img321 | Standardisation of Phantom III parts, specifically springs and steering components to improve performance and reduce cost. | ||
| View original record | RR 755 (10H) 38137 7.4.37 WHK 26070 COMPLETED 4.10.37. PHANTOM III STANDARDISATION of PARTS. Date 18.6.37. X No. 350. Drawing No. RM.393 Part List RM.393 Description of Parts Springs and parts to give… | ||
| img322 | Cost-saving modification recommendation for the Phantom III 'E' series chassis, reducing tool costs. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS OC X Date: 12.8.31 Estimated cost of new tools ...... £19.0.0. Could be brought on to production at the 1st. chassis in 'E' series (without scrap). By altering… | ||
| img323 | Standardisation of parts for Phantom III rear road springs. | ||
| View original record | RR 755 (10H) 38137 7.4.37 WHK 26070 COMPLETED 4.10.37. PHANTOM III STANDARDISATION of PARTS. Date: 23.8.37 X No. 346. Drawing No. FIRTH 201. Part List Description of Parts: REAR ROAD SPRINGS. Origin:… | ||
| img324 | Cost analysis and production decision regarding clips for the 'D' series chassis. | ||
| View original record | HAMPTON III STANDARDISATION of PARTS Estimated cost of new tools £12.10.0d. Could be brought on to production at the 51st. chassis in "D" series (without scrap). The Clips F.89582/3/4 differ only… | ||
| img325 | Standardisation report for a Phantom III stay between the gearbox and engine to reduce chunking. | ||
| View original record | RR 755 (10H) 38137 7-4-37 WHK 26070 COMPLETED 11.10.37. 7J.e. PHANTOM III STANDARDISATION of PARTS. Date 31.8.37. X No. 328. Drawing No. N.Sch.5072. Part No. N.Sch.5119. Part List Description of… | ||
| img326 | Standardisation of parts for the Phantom III, concerning modifications to the engine and gearbox mountings. | ||
| View original record | F.11 COMPLETED 11.10.37 PHANTOM III STANDARDISATION of PARTS Ref. P.III / 37 DATE 9.12.36 X on S.T.O. STO. / 105.[illegible] eff. Nov. 1936 1st [illegible] FLEXIBLE GEARBOX AND ENGINE MOUNTINGS TO… | ||
| img327 | Standardisation of parts report for a cheaper hydraulic jack tank on the Phantom III. | ||
| View original record | RR 755 (10H) 38137 7.4.37 WHK 26070 COMPLETED 14.10.37. PHANTOM III STANDARDISATION of PARTS. Date 18.9.37. X No. 1166. Drawing No. Part List Description of Parts CHEAPER HYDRAULIC JACK TANK. Origin… | ||
| img328 | Standardisation proposal for Phantom III chassis hydraulic damper arms to reduce cost. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS Drawing No. X 1106 CHASSIS HYDRAULIC DAMPER ARMS. Reason for change: To reduce cost. Extra tool cost Nil. Could be brought on to production at the 26th chassis in… | ||
| img329 | Standardisation of parts for Phantom III large differential thrust washers. | ||
| View original record | RR 755 (roll) 38137 7.4.37 WHK s6070 COMPLETED 14.10.37. PHANTOM III STANDARDISATION of PARTS. Date 24.9.37. X No. Drawing No. 302. Part List Description of Parts: LARGE DIFFERENTIAL THRUST WASHERS.… | ||
| img330 | Standardisation of a water thermometer with a scale reading up to 90°C for the Phantom III. | ||
| View original record | RR 755 (10H) 38137 7.4.37 WHK 26070 COMPLETED 14.10.37. PHANTOM III STANDARDISATION of PARTS. Date 24.9.37. X No. 6003 Drawing No. To be made by D.O. Part List Description of Parts: WATER THERMOMETER… | ||
| img331 | Cost analysis for a printing cliche to be used on 'E' Series Phantom III chassis. | ||
| View original record | CONCESSION C./15.1.37 PHANTOM III STANDARDISATION of PARTS. Extra cost of printing cliche £2 7 6d. Could be brought on to production at the 1st. Chassis in 'E' Series (without scrap). TABLE HEADERS… | ||
| img332 | Standardisation of parts for the Phantom III, specifically the Clutch Driven Plate with 'Long' type compound cushion and Thermoid facings. | ||
| View original record | RR 255 (10M) 38137 7.4.37 WHK 26070 COMPLETED 24.10.37. PHANTOM III STANDARDISATION of PARTS. Date 9.9.37. No. 312. Drawing No. EX 27309 Part List Being Prepared. Description of Parts: CLUTCH DRIVEN… | ||
| img333 | Cost analysis and production update for introducing a new clutch plate and associated tooling for the 'D' Series Chassis. | ||
| View original record | D.C.P. - 1 X on 12. Estimated cost of new tools - £79. 10. 0d. Could be brought on to production at the 101st. Chassis in "D" Series (without scrap) The nett increase stated overleaf will be 5/-… | ||
| img334 | Standardisation of parts for a Lucas P.100 open type headlamp for the Phantom III. | ||
| View original record | RR 755 (10H) 38137 7-4-37 WHK 26070 Completed 29.10.37. PHANTOM III STANDARDISATION of PARTS. Date 7.10.37. X No. 6116. Drawing No. D.182-3. Part List Description of Parts: LUCAS P.100 OPEN TYPE… | ||
| img335 | The standardisation of parts for the Phantom III 'C' series chassis. | ||
| View original record | Ref: XDW/AW. Issue No. 23. PH/ST/11. DATE 9.10.37 PHANTOM III STANDARDISATION of PARTS. To Production Dept. [Box on left] Date 9.10.37 X Div. Oil 3 B.S.(-30) per set. [Main text box] Extra tool cost… | ||
| img336 | Standardisation of parts for the Phantom III rear brake intermediate shaft, lengthening the output lever by 20%. | ||
| View original record | RR 755 (10M) 38137 7-4-37 WHK 26070 COMPLETED 11.11.37. PHANTOM III STANDARDISATION of PARTS. Date 24.9.37. X No. 306. Drawing NoG.85616. Part List Description of Parts: REAR BRAKE INTERMEDIATE SHAFT.… | ||
| img337 | Cost estimation and production planning for a standardized rear brake intermediate shaft. | ||
| View original record | NATHAN III STANDARDIZATION OF PARTS DRG. No. X 206 PART No. D.2016 REAR BRAKE INTERMEDIATE SHAFT (RIGHTHAND) TO CONTOUR OF BRAKE CHASSIS DRG. 206 to increase the proportion of stress on the front… | ||
| img338 | Standardisation of parts for an engine flexible steel coupling on a Phantom III. | ||
| View original record | RR 755 (10H) 38137 7-4-37 WHK 26070 COMPLETED 11.11.37. PHANTOM III STANDARDISATION of PARTS. Date 25.8.37 No. 312. Drawing No. Part List Description of Parts: ENGINE FLEXIBLE STEEL COUPLING… | ||
| img339 | Estimated cost for new tools and production details for the 'L' series chassis. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS Date 10.5.38 Estimated cost of new tools £16.0.0d. Could be brought on to production at the 1st. chassis in "L" series (without scrap). MATERIAL LABOUR CHARGES… | ||
| img340 | Standardisation of parts for the Phantom III, concerning the adjustment of side steering tube springs to prevent rattles. | ||
| View original record | RR 755 (roH) 46071 12-8-37 WHK 27059 COMPLETED 16.11.37. PHANTOM III STANDARDISATION of PARTS. Description of Parts: SET-UP ADJUSTMENT OF SIDE STEERING TUBE SPRINGS INCREASED FROM 0.005-0.007 to… | ||
| img341 | Standardization of parts proposal for the Phantom III model, with no extra tool cost noted. | ||
| View original record | PHANTOM III STANDARDIZATION of PARTS Date: 25.11.38 Ref. No.: X / OCE Drawing No.: niL Description of modification. This list MUST be attached to TEST OUTLINE. (P.3.C-200.0 & P.3.D-810.0) Origin To… | ||
| img342 | Standardisation of Phantom III parts, detailing a cost-saving change to a two-part brazed inner steering column tube. | ||
| View original record | RR 755 (10M) 16071 15.8.37 WHK 27059 Completed 16.11.37. PHANTOM III STANDARDISATION OF PARTS. Date 27.10.37. X No. 330 Drawing No. F.89500 F.89501 Part List F.1073 Description of Parts: INNER… | ||
| img343 | Cost estimation and production details for the standardisation of Phantom III parts. | ||
| View original record | Completed 15.11.38. PHANTOM III STANDARDISATION of PARTS Description of Part. Drawing No. 10850 X 220 Report on Experimental No. Estimated cost of new tools ....... £8. 0. 0. Could be brought on to… | ||
| img344 | Standardisation of a Phantom III part, adding extra oil holes to a spring drive centre plate to improve lubrication. | ||
| View original record | RR 755 (10H) 46071 18-8-37 WHK 27059 Completed 16.11.37. PHANTOM III STANDARDISATION of PARTS. Date 19.10.37 X No. 317. Drawing Rm. No. 394. Part List Description of Parts Extra oil holes in spring… | ||
| img345 | Drilling additional oil holes in the spring drive centre plate to improve lubrication of cotton duck washers. | ||
| View original record | PHANTOM III STANDARDISATION OF PARTS Estimated cost of new tools £5.0.0d. Could be brought on production immediately (without scrap). Drilling of additional oil holes in spring drive centre plate is… | ||
| img346 | Standardisation of the coupling piece between the dynamo and water pump. | ||
| View original record | RR 755 (10H) 46671 18.8.37 WHK 27059 COMPLETED 16.11.37. PHANTOM III STANDARDISATION of PARTS. Date: 27.10.37 No. 1269. Drawing Ex. No. 27901. Part List Description of Parts: COUPLING PIECE BETWEEN… | ||
| img347 | Cost estimate and production timeline for new dies for a Phantom III frame bracket for an oil cooler. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS Description. Part No. FRAME BRACKET FOR OIL COOLER Origin Report from Experimental Dept. Estimated cost of new dies ......£14. 0. 0. Could be brought on to… | ||
| img348 | Standardisation of parts for front and rear brake drums made in Chromidium. | ||
| View original record | RR 755 (toH) 46071 18-8-37 WHK 27059 COMPLETED 16.11.37. PHANTOM III STANDARDISATION of PARTS. Date 14.10.37. X No. 1028. Drawing No. S5623/4 Part List Description of Parts: FRONT AND REAR BRAKE DRUMS… | ||
| img349 | Costing and production schedule for a standardised part for the Phantom III 'D' Series chassis. | ||
| View original record | S. E. C./14.10.36 PHANTOM III STANDARDISATION of PARTS Description of Stuff. Date 14.10.36 X Nov. 1936 Drawing A36569 Part nil Extra Tool Cost Nil. "Could be brought on to production at the 101st.… | ||
| img350 | Standardisation report for an S.U. high-pressure petrol pump on the Phantom III, intended to prevent vapour lock. | ||
| View original record | RR 755 (10H) 38137 7.4.37 WHK 26070 COMPLETED 16.11.37. PHANTOM III STANDARDISATION of PARTS. Date 11.10.37 X No. 1263. Drawing No. S.3191. Part List Description of Parts S.U. HIGH PRESSURE PETROL… | ||
| img351 | Estimated cost of new tools for a modification introduced on the 117th chassis in 'C' Series. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS Date 17.10.37 Estimated cost of new tools ... £91. 10. 0. This modification was introduced on production at the 117th. chassis in 'C' series. TABLE 1 (headers are… | ||
| img352 | Phantom III standardisation of parts document, replacing baffle washers with plain washers on the servo drive shaft. | ||
| View original record | RR 755 (roH) 46071 18-8-37 WHK 27059 COMPLETED 16.11.37. PHANTOM III STANDARDISATION of PARTS Description of Parts: BAFFLE WASHERS ON SERVO DRIVE SHAFT REPLACED BY PLAIN WASHERS. Origin: To reduce… | ||
| img353 | Standardisation of parts proposal for the Phantom III, to be introduced on the 'D' series chassis. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS DRAWING No. SHAW'S OFFICE PRINT. REPLACE BY MAIN DRAWING Extra tool cost ..... Nil. Could be brought on to production at the 101 st. chassis in "D" series (without… | ||
| img354 | Modification request to increase the life of a milling cutter, detailing cost and production availability. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS Estimated cost of new tools £14.0.0d. Could be brought on production as soon as new milling cutters are available. (without scrap). Modification requested by Works… | ||
| img355 | Standardisation of Phantom III brake friction lining made of Ferodo M.R. to increase braking power and reduce squeak. | ||
| View original record | RR 755 (10M) 38137 7.4.37 WHK 26070 COMPLETED 18.11.37. PHANTOM III STANDARDISATION of PARTS. Date 4.10.37. X No. 1180. Drawing No. G.S/3619/20/21. Part List G.S3622. Description of Parts: BRAKE… | ||
| img356 | Standardisation of parts document for the Phantom III 'D' series chassis production. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS Description of part's name Drawing No. X Extra tool cost Nil. Could be brought on to production at the 101st. chassis in 'D' series (without scrap). TABLE 1:… | ||
| img357 | Standardisation of a support guard for the sump filter on a Phantom III. | ||
| View original record | RR 755 (10H) 46071 18-8-37 WHK 27059 COMPLETED 1.1.38. PHANTOM III STANDARDISATION of PARTS. Date 24.11.37. Description of Parts: SUPPORT GUARD FOR SUMP FILTER. (Oil). X No. 1139. Drawing No. Lc.… | ||
| img358 | Cost and implementation proposal for a production modification involving a sleeve and caps for a chassis. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS Estimated cost of new tools ......... £18.0.0. Could be brought on to production at the 1st. chassis in "A" series (without scrap). Use Sleeve E.89030 sweated… | ||
| img359 | Standardisation of parts for the Phantom III, involving the deletion of supporting stays on the Air Silencer. | ||
| View original record | RR 753 (10H) 46071 18-8-37 WHK 27059 CS COMPLETED 18.1.38. PHANTOM III STANDARDISATION of PARTS. Date 29.12.37. X No.1297. Drawing No. LOF. 88088. Part List See Rm/Wym.1/AP. 21.9.37. Description of… | ||
| img360 | Standardisation of parts for the Phantom III, concerning the deletion of supplying a syren. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS Deletion of supplying an syren no longer necessary Date 8.SEP.1938 M.C.1206 X Drawing No. Tool No. Tool Cost ........ Nil. Could be brought on production at the… | ||
| img361 | Standardisation of parts for adjustable cross steering tubes. | ||
| View original record | RR 755 (10H) 46071 18-8-37 WHK 27059 LS COMPLETED 18.1.38 PHANTOM III STANDARDISATION of PARTS. Date 13.10.37. X No. 350. Drawing No. N.Sch.4967. Part List No. N.Sch.4974. Description of Parts: CROSS… | ||
| img362 | Standardization of parts proposal for the Phantom III 'E' series chassis. | ||
| View original record | PHANTOM III STANDARDIZATION of PARTS X /01.01.37 Drawn. A H W. 10 DEC 1936 Could be brought on to production on the 1st. chassis in 'E' series (without scrap). Extra tool cost ...... NIL. [Cost Table… | ||
| img363 | Standardisation of a stone-guard for the Phantom III rear brake intermediate shaft. | ||
| View original record | RR 755 (10H) 46071 18-8-37 WHK 27059 LS COMPLETED 18.1.38. PHANTOM III STANDARDISATION OF PARTS. Description of Parts: STONE-GUARD FOR REAR BRAKE INTERMEDIATE SHAFT. Origin: REAR BRAKES JAMMED ON IN… | ||
| img364 | Estimated tool cost and production note for a stone-guard for a rear spring gaiter. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS Description of Part STONE-GUARD FOR REAR SPRING GAITER S.442 Date: 14.2.35 Drawing No.: X No. 300 H.S.S. on S.I. 3144 Estimated tool cost ..........£8.0.0. Could… | ||
| img365 | Standardisation of parts for the Phantom III overdrive gearbox. | ||
| View original record | RR 755 (10H) 46071 18-8-37 WHK 27059 COMPLETED 18.1.38 PHANTOM III STANDARDISATION OF PARTS. Date 10.12.37 X No. 328. Drawing No. EX.26666 Part List Description of Parts: OVERDRIVE GEARBOX. Origin: To… | ||
| img366 | Cost analysis and implementation instructions for introducing an overdrive gearbox on the 'D' series chassis. | ||
| View original record | PHANTOM III STANDARDISATION of PARTS. OVERDRIVE GEARBOX. CONCESSION No. 18.(1..38) To increase bearing life and provide smoother running at high speeds. Estimated cost of new tools ........£450.0.0.… | ||
| img367 | Standardisation of Wraith type front suspension levers for the Phantom III. | ||
| View original record | RR 755 (10H) 38137 7.4.37 WHK 26070 COMPLETED 1.3.38. PHANTOM III STANDARDISATION of PARTS. Date 13.9.37 X No. 346. Drawing No. N.Sch. 4756/7/8. Part List Description of Parts: WRAITH TYPE FRONT… | ||
| img368 | Standardisation of parts for the Phantom III new type front suspension link, including cost estimations. | ||
| View original record | PHANTOM III STANDARDISATION OF PARTS NEW TYPE FRONT SUSPENSION LINK Estimated tool cost £ 720.0.0d. Could be brought on to production without scrap on the 1st. chassis in "E" series. 66 pence each… | ||