Rolls-Royce Archives
| Identifier | Entry | ||
| B001_X101TO X102-page1 | Cover or divider page with the handwritten number '101.'. | ||
| View original record | 101. | ||
| B001_X101TO X102-page2 | Clarifying the design assumptions for the Peregrine Front Axle Control. | ||
| View original record | BY. FROM HDY. X 1017 HDY2/M13.8.32. C. to SG. WOR. E. C. to DA. HS. PEREGRINE FRONT AXLE CONTROL We are presuming that this is being scaled down from J.3, and that no designs are expected from W.W. If… | ||
| B001_X101TO X102-page3 | Drawing for the Peregrine front axle control. | ||
| View original record | [Struck through text] Hay. O. Bgs. C. Her. C. By. C. Hs. [End of struck through text] X / 01 EY/5/C.15.8.32. PEREGRINE - FRONT AXLE CONTROL. ------------------------------- In reply to… | ||
| B001_X101TO X102-page4 | The correct pivot lean for the Peregrine and the necessary modification to the axle control. | ||
| View original record | X101. To By. From Hs/Rm. Hs/Rm.1/MJ.14.10.32. Will you please note that we find the correct pivot lean of the Peregrine is between 4 and 5o. It will therefore be necessary to modify the axle control… | ||
| B001_X101TO X102-page5 | Modification to top ball pads in the anchorage bracket for the Peregrine II chassis. | ||
| View original record | C. Hs/Hm. (crossed out) 8101 BY/HEB/M.30.12.32. PEREGRINE II. CHASSIS. MODIFICATION TO TOP BALL PADS IN ANCHORAGE BRACKET, TO R.R. SCHEME 394. ANCHORAGE FOR FRONT AXLE CONTROL SEC: 7161. FRONT SHOCK… | ||
| B001_X101TO X102-page6 | Adaptation of the 25HP front axle control to use a 3-bolter shock damper following a 10,000-mile test. | ||
| View original record | X/01. BY. FROM DA. DA2/M14.1.33. C. to SG. WOR. HS. E. 25HP. FRONT AXLE CONTROL. X. 235. X. 4027. In view of the necessity for using a 3 bolter shock damper as a result of the 10,000 miles test, we… | ||
| B001_X101TO X102-page7 | Modifications to the Peregrine & Bensport front axle. | ||
| View original record | X101 BY: FROM DA. DAL/M4.3.33. C. to SG. WOR. HS. E. HDY. PEREGRINE & BENSPORT FRONT AXLE. Herewith is N. scheme 3701. giving the above axle modified to give a pivot inclination of 4º with the… | ||
| B001_X101TO X102-page8 | Cover or divider page with a handwritten number. | ||
| View original record | 102. | ||
| B001_X101TO X102-page9 | Modifications for the Peregrine and Bensport rear axles, including new hypoid gear ratios. | ||
| View original record | X107. BY. FROM DA. DAL/M20.8.32. C. to SG. WOR. HS. E. X.4027 X.4553 PEREGRINE & BENSPORT REAR AXLE. We send herewith N. sch. 3514. shewing the 8.5" hypoid gear, ratio 9/46. for Peregrine, and 10/41… | ||