Rolls-Royce Archives
| Identifier | Entry | ||
| B002_X 131 135-page01 | Blank page with a handwritten reference or page number in the top right corner. | ||
| View original record | 13/ | ||
| B002_X 131 135-page02 | Design changes to differentiate the Peregrine model from the 25HP, focusing on coachwork and the instrument panel. | ||
| View original record | X131 TO SG. FROM EV. EV3/9.1.33. COPY TO WDR. HS. BY. E. RE; PEREGRINE. It has occurred to us that whilst we cannot skimp the specification of the Peregrine as a motorcar as the specification of some… | ||
| B002_X 131 135-page03 | Features and development of a new grouped instrument panel for the Peregrine. | ||
| View original record | 8131 To Sg. from S. E.3/HP.11.1.33. X6069 C. Wkr. Hq. Br. Hy/CW. re Peregrine Grouped Instruments. Referring to memo EV3/9.1.33, we have had in hand for some time a grouped instrument panel for… | ||
| B002_X 131 135-page04 | Suggestion to use the same improved scheme on both the Peregrine and 20/25 car models. | ||
| View original record | - 2 - E.3/HP.11.1.33. ---------------- and we would suggest that rather than attempt to make the Peregrine and the 20/25 unlike each other that it would be better to use the improved scheme on both… | ||
| B002_X 131 135-page05 | Suggestions and requirements for a new instrument board panel design for both RR and Bentley cars. | ||
| View original record | X131-7 E. FROM DA/EV. DA/EV1/M18.2.33. X.7530. X.5530. X.4553. X.4027. C. to SG. WOR. HS. BY. HDY. RR. & BENTLEY CARS. re. INSTRUMENT BOARD PANEL. We thank you for EL/HP10233. and the attached prints… | ||
| B002_X 131 135-page06 | Review of design points concerning an outer frame, switchgear, and switchbox, with suggestions for improvement. | ||
| View original record | (2) With respect to the outer frame which is of the section exactly similar to that which we use, we suggest that this would be improved in appearance if it were very much less wide than on the… | ||
| B002_X 131 135-page07 | Letter discussing a new design for a combined speedometer and tachometer with glass edge illumination. | ||
| View original record | (3) We have asked Smith & Sons to send you a model of our latest design of combined speedometer and tachometer and glass edge illumination. We take it that as you are doing the design of the… | ||
| B002_X 131 135-page08 | Blank page with the handwritten page number 135. | ||
| View original record | 135 | ||
| B002_X 131 135-page09 | Modifications to the Peregrine 2 accelerator pedal and related bodywork concerns. | ||
| View original record | X.135. BY. FROM DA. C. to HS. E. DA2/ML.2.32. X.4027 PEREGRINE 2. PEDALS. We think we shall probably wish to modify the accelerator pedal shewn on RR.sch.167. We note that you have followed the 20/25… | ||
| B002_X 131 135-page10 | Technical memorandum regarding the addition of a spring washer to prevent clutch pedal oscillation on J.III and Peregrine models. | ||
| View original record | Hy. From Hs/Les. C. to S. C. to Hor. J.III AND PEREGRINE PEDALS. In order to prevent the clutch pedal from oscillating up and down due to its own inertia, it is necessary to add a spring thackery… | ||
| B002_X 131 135-page11 | Blueprint for a proposed fixed pedal support for the Peregrine. | ||
| View original record | To Bm. from E. c. Sir. Hy. Rce. re Pedal Support for Peregrine. Referring to our discussion on the telephone, we send you herewith a blueprint of F.100783 roughly marked up in pencil to show proposed… | ||
| B002_X 131 135-page12 | Suggestion to fit a felt washer to the circular stem for the Peregrine foot and clutch pedals. | ||
| View original record | 6.135. To Hs. from GWH. c. E. BY. Hs/GWH.3/KT.30.12.32. Re. PEREGRINE PEDALS. Now that we have a circular stem for the foot and clutch pedals, we would suggest that we fit a felt washer to embrace the… | ||
| B002_X 131 135-page13 | Confirming instructions for a felt washer to be fitted to the Peregrine pedal stem. | ||
| View original record | Hs. r 135 BY/Mtn11/N.2.1.33. Re: Peregrine Pedals. ------------------- Referring to Hs/GWH.3/KT.30.12.32, suggesting a felt washer to embrace the pedal stem, kindly note we have instructed this in… | ||