| Identifier | Entry | |
|
Scan0 |
The standardization of rust protection for water pipe clips using copper and nickel plating.
| |
|
View original record |
To BY. from R. Copy to EFC. Sta. sheet. ORIGINAL. 14th April 1918. R3/G14418 RECEIVED APR 1918 RE X.3200 - Water Pipe Clips. Regarding the experiment X.3200, Mr. Hives considers that the water pipe…
| |
|
Scan1 |
Outlining a proposed testing procedure for various self-starting motors.
| |
|
View original record |
To EFC. from R. Copy to CJ. X.2642 X.3161 X.3175 X.3230 ORIGINAL. RE SELF-STARTING MOTORS 17th April, 1918. 19 APR 1918 R/G17418. RECEIVED With reference to the testing of various Self-starting…
| |
|
Scan2 |
Technical comparison between a R.R. motor and a Lucas motor, focusing on efficiency, speed, voltage and starting characteristics.
| |
|
View original record |
To EFC. from R. -2- R3/G17418 Contd. each motor so that the maximum horse power and maximum efficiency is at approximately the same speed in each machine. For instance, supposing the R.R. motor shewed…
| |
|
Scan3 |
Performance, testing, and modification of starter motors for car and aero engines.
| |
|
View original record |
To EFC. from R. -3- R3/G17418 Contd. there is much more to be considered than the maximum horse power or the maximum efficiency. It was these auxiliary considerations which led us to wind the field…
| |
|
Scan4 |
Voltage settings and performance curves at specific speeds.
| |
|
View original record |
To EFC. from R. -4- R3/G17418 Contd. would probably be a curve shewing a maximum at 2500, slightly higher than the 12 volt one. If these speeds are thought too high, then the voltage should not be 20,…
| |
|
Scan5 |
Suggesting a rig for testing the mechanical strength of crankshafts, similar to one used for pistons.
| |
|
View original record |
To BY. } " DA. } from R. " EH. } Copy to CJ. ORIGINAL D 30 APR 1918 RECEIVED 29th April, 1918. R4/G29418. RE RIG FOR TESTING PISTONS. Many months ago I suggested a rig (Lec.731) for testing pistons;…
| |
| | | |