Complaints that Dermatine washers are inferior and a proposal to test a thicker version.
| Identifier | ExFiles\Box 42\4\ Scan001 | |
| Date | 25th August 1919 | |
| R.R. 235 a (996 T) (S.F. 674, 22-5-19) G. {Mr Griffiths - Chief Accountant / Mr Gnapp} 3376 83855 BY {R.W. Bailey - Chief Engineer} /JH9/H. 25. 8. 19. EFC {E. Fowler Clarke - Electrical Engineer} Mr.Shelton. RE DERMATINE WASHERS *3570 The Works are complaining that the Dermatine washers used on the chassis are inferior to the rubber insertion washers used in pre-War days. They are of the opinion that if the dermatine washers were increased in thickness a better joint would be obtained. The Order Office inform us that the Stores have a sheet of Dermatine of a thickness greater that washers used on the chassis. Could you please arrange to fit a set of washers made in this thicker material to a chassis and report upon same. The difficulty the Works are having is due to the fact that the Dermatine crinkles making it impossible to obtain a water-tight joint. Will Mr.Clarke please issue an experimental number. BY {R.W. Bailey - Chief Engineer} /JH. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).