Recommendation to prevent a short circuit on Watford EW6 Magneto contact breaker covers by filling a riveting hollow with insulating compound.
| Identifier | ExFiles\Box 65\3\ scan0211 | |
| Date | 7th March 1928 | |
| EFC. {E. Fowler Clarke - Electrical Engineer} WC.83. COPY 7.3.28. CONTACT BREAKER COVERS ON WATFORD EW6 MAGNETOS. On these covers the securing spring is liable to be sprung into the wrong locating hollow, there being two hollows in the cover, one in the centre (the correct location) and the other about 1/2" away where the low tension copper connecting blade is riveted to the cover. If the spring was wrongly located in this latter hollow a primary short circuit would occur; this has happened on the Watford EW6 magneto fitted to 17-EX. We recommend that this riveting hollow be filled up with insulating compound level with the surface of the cover to obviate a possible short circuit. EFC {E. Fowler Clarke - Electrical Engineer} /H.E.West. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).