Brake failure on car 33.G.6, caused by a loose banjo connection on the hydraulic cylinder.
| Identifier | ExFiles\Box 143\3\ scan0363 | |
| Date | 14th June 1940 | |
| Mr. Barkworth. Transport. from Rm. {William Robotham - Chief Engineer} When Hs {Lord Ernest Hives - Chair} 's car, 33.G.6. arrived at the Clan Foundry we found that the reason why the brakes were not functioning was because a banjo connection had come loose and all the oil had run out of the hydraulic cylinder. Tightening the banjo up and re-filling the cylinder put the brakes right. Since we are now located a considerable distance from Derby and it is extremely inconvenient for Hs. {Lord Ernest Hives - Chair} to lose his car for any length of time I cannot see why Hs {Lord Ernest Hives - Chair} 's chauffeur should not endeavour to locate and rectify faults of this type without holding up the car by sending it to Belper. We are quite willing to give him a brief instruction on the running and maintenance of the car at any time. Rm. {William Robotham - Chief Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).