Production instructions for engine components to be incorporated into the 22-G-V / C-16 Unit.
| Identifier | ExFiles\Box 101\1\ scan0138 | |
| Date | 24th February 1936 | |
| x 500a To RHC. {R. H. Coverley - Production Engineer} Hs {Lord Ernest Hives - Chair} /GWH. {George W. Hancock - Head Chateauroux} 15/KW.24.2.36. 22-G-V. {VIENNA} C-16 Unit. The following units have been instructed for production and should be incorporated on 22-G-V :- ENGINE. Bearings, Main - white metal. Con. Rods - A.T. Hall's. Pistons - E.60632, die-cast. Valves - Inlet & Exhaust Ex.21131/2, Production No. E.60892/3. Valve Springs - E.60420. Valve Wedges - Inlet, E.60824. Rocker Shaft EB.2854. Rocker Arms R.H. & L.H. EB.2588/9 production. Our number is EB.2850/1 but the large hole at end of rocker must not be drilled, retain the small hole. Induction Pipe - E.60874. Mod. to Pipe LeC.4947. Drain pipesto LeC.4958. Air silencer intake bend E.60587. Carburetter LeC.4883. Rubber drive for dynamo 1.5 engine speed, LeC.4708. LOP. EB.2724. Front exhaust expansion box LeC.4930. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).