New drawing for a Push Rod for the Bentley 60 Chassis, replacing an older part.
| Identifier | ExFiles\Box 123\5\ scan0082 | |
| Date | 7th September 1938 | |
| To: HES c/c D.P. c/c Capt. Wadds c. Rm {William Robotham - Chief Engineer} /Swdl. {Len H. Swindell} 1044 Swell Plee BY {R.W. Bailey - Chief Engineer} /CS3/EH.7.9.38. Re Bentley 60 Chassis (Cast Iron Engine). Valves & Fittings - Sec:5060. Please receive herewith blue prints of the following new drawing, detailed in accordance with memo' BY {R.W. Bailey - Chief Engineer} /NS. {Norman Scott} 2/G.3.9.38. EB.4199 Push Rod replaces (E.87350 (EB.3859/60. Will you please instruct as required. In accordance with the above memo' these parts are to be produced by the Belgrave Engineering Co. BY {R.W. Bailey - Chief Engineer} /CS. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).