The weight and cost implications of half floating axles versus fully floating axles, and pressed wheels versus spoked wheels.
| Identifier | ExFiles\Box 7\3\ X 602 Axle Rear-page25 | |
| Date | 24th September 1936 | |
| -4- Hs {Lord Ernest Hives - Chair} /Gry. {Shadwell Grylls} 16/Ks.24.9.36. We realise that a half floating arrangement will always weigh more than a fully floating axle, but think the extra weight (due solely to the larger axle shafts) is worth while to eliminate all slack. The saving in cost will be about £1 per car, due to the absence of splines connected with the wheel drivers. If at any time we should use pressed instead of spoked wheels, this can be done on a half floating axle with a saving in weight of about 12 lbs. It should be possible to retain such a wheel with one central nut. Hs {Lord Ernest Hives - Chair} /Gry. {Shadwell Grylls} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).