Parts list and instructions for a Bentley 50 car heater and dashboard arrangement.
| Identifier | ExFiles\Box 137\2\ scan0179 | |
| Date | 18th October 1938 | |
| 1158 870 HPS. {Horace Percy Smith - Experimental Factory Mgr} c. Rm. {William Robotham - Chief Engineer} o. {Mr Oldham} Rm {William Robotham - Chief Engineer} /Std. BY {R.W. Bailey - Chief Engineer} /Ald. {F. Allwood - Experimental Design} 17/G.18.10.38. BENTLEY 50. CAR HEATER - DASHBOARD NO SECTION. SECTION 7130. Please receive herewith two prints of the following new drawings (three where marked thus *) :- S.CD.938 Car Heater Arrgt. * Ex.S.1134 Housing - Motor Support. 1 off. Ex.S.1135 Bush - Bearing. 1 off. Ex.S.1136 Rubber Washer. 2 off. Ex.S.1137 Steel Washer. 2 off. Ex.S.1138 Spindle Extension. 1 off. Ex.S.1139 Sleeve - Spindle Extension. 1 off. Ex.S.1140 Rubber Support. 2 off. Ex.S.1141 Screwed Sleeve. 2 off. SECTION 7130. Ex.S.1142 Dashboard 1 off. The following standard parts will also be required :- K.1816 Cheese Head Screw. 2 off. K.9005 Washer 2 off. K.4404 Washer 2 off. K.4340 Nut 2 off. The remainder of parts can be obtained from Rm {William Robotham - Chief Engineer} /Std. i.e. Heater Unit, A.C. Motor etc. The above is in accordance with memo Rm {William Robotham - Chief Engineer} /Std.5/MH. {M. Huckerby} 6.10.38. This completes instructions for the above experiment. Ald {F. Allwood - Experimental Design} BY {R.W. Bailey - Chief Engineer} /Ald. {F. Allwood - Experimental Design} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).