Specification of revised work carried out on a Bentley Chassis 1-B-50 and Bentley Unit B.60 - No.1.
| Identifier | ExFiles\Box 153\3\ scan0179 | |
| Date | 3rd September 1942 | |
| To Rm. {William Robotham - Chief Engineer} from Rm {William Robotham - Chief Engineer} /CP. [strikethrough]to Rm {William Robotham - Chief Engineer} /Wym. {G. Harold Whyman - Experimental Manager} [/strikethrough] 1298 Rm {William Robotham - Chief Engineer} /CP.7/LH. {Mr Haworth} 3.9:42. Bentley Chassis 1-B-50. Bentley Unit B.60 - No.1. Specification of the above Chassis is revised as follows :- Work carried out at Clan 2.9.42. Front Axle. LOP.FB.3091. The following new parts fitted :- J. {Mr Johnson W.M.} 389 Needle Bearing FB.4265 Pivot Pin - ground to suit - correct pin not available. } Near Side. Front Brakes. LOP.FB.3182. Brakes relined with B.Z and R.U. liners. Propeller Shaft. LOP.GB.3176. New universal joint fitted - rear end. Rm {William Robotham - Chief Engineer} /CP | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).