Outlining details for the Front Stabiliser, dynamo, distributor, and starter motor sections.
| Identifier | ExFiles\Box 109\3\ scan0181 | |
| Date | 2nd July 1941 | |
| -2- Rm {William Robotham - Chief Engineer} /HH.6/RH. {R. Hollingworth} 2.7.41. Section 7166 - Front Stabiliser. RF.2560 LOP. No bought out parts. It should be noted that the above sections do not complete the chassis and therefore, it is probable that further parts may have to be obtained as other sections are completed. We would point out that the following sections were issued under memos Rm {William Robotham - Chief Engineer} /HH.6/SW.2.6.41, and Rm {William Robotham - Chief Engineer} /HH.4/SW. 24.4.41. Sections 8070 to 8110 - dynamo Section 8120 - distributor. Section 8000 to 8040 - starter motor. The above to be supplied to HPS. {Horace Percy Smith - Experimental Factory Mgr} by Rm {William Robotham - Chief Engineer} /RC. {R. Childs} who has been supplied with prints. Prints of the relevant details are attached to individual copies of this memo. Rm {William Robotham - Chief Engineer} /HH. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).