Torque estimations and recommendations for EAC.10 servo gears.
| Identifier | ExFiles\Box 12\5\ 05-page044 | |
| Date | 13th December 1927 | |
| To BY. {R.W. Bailey - Chief Engineer} from Hs {Lord Ernest Hives - Chair} /Rm. {William Robotham - Chief Engineer} +7420 +7370 lis/Rm {William Robotham - Chief Engineer} 4/LG13.12.27. We understand you are interested in the torque which will have to be transmitted through the EAC.10 servo gears. We estimate that this will be about 160 lbs.ft. on the servo driving shaft and recommend that you specify 170 lbs.ft. to allow for extreme conditions or variations in the leverage and drum diameter which may take place from time to time. In making our calculations we have assumed that the leverages on EAC.10 will be the same as those on EAC.7. as this is the latest design on which we have a complete specification. Hs {Lord Ernest Hives - Chair} /Rm. {William Robotham - Chief Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).