Request for a set of parts and attached blueprints for a Starter Motor, L.O.P. D.71484.
| Identifier | ExFiles\Box 64\2\ scan0127 | |
| Date | 27th October 1927 | |
| X7625B BY {R.W. Bailey - Chief Engineer} /RD4/ML.27.10.27. C. EFC. {E. Fowler Clarke - Electrical Engineer} [Stamp: RECEIVED 27 ...] Lec.2425 - STARTER MOTOR (2.B SCH:) 14-EX. BEARING BRACKETS ETC. SEC:SO10. Please receive herewith details of parts to Lec.2425 and suitable only for fitting to 14-EX. Will you please put in hand one set of parts to L.O.P. D.71484:- Blueprints of the following attached:- + D.71466 - Bearing Bracket C.E. + D.71467 - " " P.E. D.71470 - Bush for Brg: Bracket C.E. D.71471 - Supptg: Piece - End Cover. D.71472 - Securing Nut - End Cover. D.71473 - Spring Ring for D.71472. D.71474 - Supptg: Bush - Plunger Rod. D.71475 - Securing Screw for Brush Holder. D.71476 - Contact Point. D.71477 - Support for Contact Screw. D.71478 - Securing Stud (Contact Support). D.71479 - Insert for Contact Screw. D.71480 - Contact Arm. D.71482 - Cover Insulation. D.71483 - Cross Connector. D.71485 - Insulation Bush. D.71486 - Field Connector. D.71484 - L.O.P. D.71481 - End Cover. † Advance prints have already been handed to Pattern Shop. The following parts called for on the L.O.P. have been previously issued and you may have some in stock:- D.51560 - Contact Screw. D.70161 - Brush Flex. Connector. D.70224 - Rivet - Cover Insulation. D.70281 - Spring Spindle - Brush Holder. D.70289 - Securing Screw - Brg: Brkts: D.70618 - Brush Spring. D.71254 - Brush Holder. D.71255 - Brush Holder Partition. D.71279 - Comm: Brush. D.71280 - Brush Holder Insulation. D.71281 - Insulating Piece. D.71283 - Connector Brush Holder. D.71284 - Packing Piece " " D.71286 - Special Nut. D.71275 - Motor Securing Bolt. BY {R.W. Bailey - Chief Engineer} /RD. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).