Listing parts with quantities, organized by section number, required for testing on a single-cylinder unit.
| Identifier | ExFiles\Box 134\1\ scan0130 | |
| Date | 9th February 1939 | |
| -2- By {R.W. Bailey - Chief Engineer} /Ald. {F. Allwood - Experimental Design} 2/AW.9.2.39. Section 5090. K.4008. Nut for Camshaft Gear Wheels. 10 off. KB.2954. Lockwasher for Camshaft Gear Wheels. 10 off. A.50571. Key for Cam. 2 off. KB.5058. Nut for Camshaft. 2 off. E.80939. P.Washer for Camshaft. 2 off. G.100377. L.Washer for Camshaft. 2 off. Section 5050. K.4847. Pin for Housing Oil Holes. 1 off. E.16242. Pin for Rocker Arm. 3 off. E.27486. Washer for Oil Feed Union. 1 off. E.75961. Union for Oil Feed Union. 1 off. F.80605. Disc for Oil Plug. 1 off. Section 5060. EB.3855. Tappet - Inlet Valve. 1 off. EB.3856. Tappet - Exhaust Valve. 1 off. EB.3861. Adjusting Screw - Exhaust Valve. 1 off. G.80757. Nut for Adjusting Screw. 1 off. EB.4312. Inlet Push Rod. 1 off. Also attached are 2 blue prints of the following compiled to suit the above:- EXS.1419.LOP. Camshaft. Kindly instruct 1 set. The above is as requested by memo Rm {William Robotham - Chief Engineer} /Ed. {J. L. Edwards} 16/JH.10.1.39 to enable tests to be made on the single Cylinder Unit with B.60 Cams and Tappets. Attached to Rm {William Robotham - Chief Engineer} /Ed {J. L. Edwards} 's copy is a blue print o {Mr Oldham} / SCD.1172. Ald {F. Allwood - Experimental Design} By {R.W. Bailey - Chief Engineer} /Ald. {F. Allwood - Experimental Design} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).