Specification sheet detailing parts and instructions for various vehicle systems.
| Identifier | ExFiles\Box 97\1\ scan0247 | |
| Date | 1st November 1938 | |
| -3- Suspension. Rear - Cont'd. {John DeLooze - Company Secretary} Spring shackle FCD.912. Locating screw threaded bushes FCD.852. Sliding control SCD.819/20. Dampers. R.R. type. Valve specification later. Rear roll rod. Scheme later. Spare wheel carrier FB.8. Duprene washers for anchorage pins FCD.901. Clutch. As 8.B.V. but with flexible flywheel to Rm. {William Robotham - Chief Engineer} 533. Petrol System. Petrol pump. Cast iron pots. High pressure pump. Olive joints. Electrically operated reserve tap. Smith's single wire gauge with warning light. 18-gallon petrol tank. Spot welded straps FB.4227/8. Isolated vent pipe. Modified. Steering. To L.O.P. FB.3799. Frame. To L.O.P. FB.3658. Fittings LOP.FB.4211. Frame already in works. Exhaust System. To Rm {William Robotham - Chief Engineer} /Sym's instructions. Engine. Specification to be issued by Rm {William Robotham - Chief Engineer} /Swdl. {Len H. Swindell} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).