The preparation of parts and modification of a flywheel to fit a 10' B & B clutch.
| Identifier | ExFiles\Box 129\4\ scan0197 | |
| Date | 13th April 1938 | |
| γ 1110 To HPS. {Horace Percy Smith - Experimental Factory Mgr} from Rm {William Robotham - Chief Engineer} /NRC. {N. R. Chandler} c. Rm {William Robotham - Chief Engineer} /Wym. {G. Harold Whyman - Experimental Manager} Rm {William Robotham - Chief Engineer} /NRC. {N. R. Chandler} 5/MH. {M. Huckerby} 13.4.38. SEMI-FLEXIBLE FLYWHEEL LOW INERTIA. Please prepare - Rm. {William Robotham - Chief Engineer} 502 Inertia Ring A {Mr Adams} /C. 1 off. 2 copies of drawing herewith. Rm. {William Robotham - Chief Engineer} 516 Washer S/M. 8 off. Rm. {William Robotham - Chief Engineer} 515 Bolt S/N. 6 off. Also Re-drill the existing flywheel Rm. {William Robotham - Chief Engineer} 499 as shown on Rm. {William Robotham - Chief Engineer} 514 so that it will take a 10" B & B clutch. This flywheel is at present on 29.G.VI, but please prepare the other parts before removing the flywheel from car. Rm {William Robotham - Chief Engineer} /NRC {N. R. Chandler} , | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).