The cost savings for Phantom III coupling shafts by using Carbon Steel instead of Nickel Steel.
| Identifier | ExFiles\Box 94\2\ scan0112 | |
| Date | 11th December 1936 | |
| To Rm. {William Robotham - Chief Engineer} from G {Mr Griffiths - Chief Accountant / Mr Gnapp} /Rb. {R. Bowen} [Struck through: c.c to Roy {Mr H. Royce - Buyer} /MS.] X328 Phantom III Chassis Engine Coupling (6020) Coupling Shafts. We are informed by Roy {Mr H. Royce - Buyer} /MS that you wish to know the cost difference of the Coupling Shaft - rear G83429, and Coupling Shaft - front G82463, if this were forged by us in Carbon Steel (201.D) instead of as present in 3½% Nickel Steel. Please note that the saving in Factory Cost so far as the forgings are concerned would be 2/- and 2/5d. respectively. G {Mr Griffiths - Chief Accountant / Mr Gnapp} /Rb. {R. Bowen} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).