Blanking plate for use on the Wraith III dashboard when a car heater is not fitted.
| Identifier | ExFiles\Box 137\3\ scan0131 | |
| Date | 25th August 1939 | |
| BY {R.W. Bailey - Chief Engineer} /NS. {Norman Scott} c. Rm. {William Robotham - Chief Engineer} c. De/JD. {J. Draper - Frames} 11-8 DA. {Bernard Day - Chassis Design} 8/G.25.8.39. RR. CAR HEATERS ON DASHBOARD. WRAITH III. Please receive herewith :- F.CD.1510 Blanking Plate for use when heater is not fitted. As it is intended to drill all dashboards so that a car heater can be fitted, when required, with a minimum amount of work, this scheme shows a method of blanking off or covering the holes when the heater is not fitted. It consists of a mild steel plate located by the two hank rivet bushes and secured by a centre bolt. 2 BA. screws should be inserted in the heater fixing holes. This is required for production chassis. DA. {Bernard Day - Chassis Design} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).