Confirming instructions to fit a starter carburettor to D.2 series pieces and produce a special spindle.
| Identifier | ExFiles\Box 13\3\ 03-page100 | |
| Date | 16th August 1929 | |
| BY {R.W. Bailey - Chief Engineer} /cc. c. Hs. {Lord Ernest Hives - Chair} K7280 BY2/G.16.8.29. STARTER CARBURETTER. -------------------- I wish to confirm your verbal instruction of yesterday afternoon that we should at once instruct the Experimental Department to fit up a starter carburetter to series D.2 pieces. All the parts from the union upwards can be utilised on the present chassis. In addition we must produce a special spindle having the D.2 series diameter of seating, and also having the 6° taper on the spindle. The spindle itself should fit into a present type chassis. We should hold up this spindle on K.2 series, and I will myself arrange the matter with the Works in a manner which will not alarm them. BY. {R.W. Bailey - Chief Engineer} By Handwritten note: tried & failed do not go further | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).