The parts and blueprints required for a Smiths Car Heater assembly.
| Identifier | ExFiles\Box 137\2\ scan0265 | |
| Date | 15th December 1938 | |
| HPS {Horace Percy Smith - Experimental Factory Mgr} c. Rm. {William Robotham - Chief Engineer} o. {Mr Oldham} Rm {William Robotham - Chief Engineer} /Std. 1158 BY {R.W. Bailey - Chief Engineer} /Ald. {F. Allwood - Experimental Design} 19/G.15.12.38. B.111 and B.50. CAR HEATER. Please receive herewith two blueprints of each of the following, issued in accordance with memo Rm {William Robotham - Chief Engineer} /Std.7/MH. {M. Huckerby} 29.11.38. S.CD.1042 Smiths Heater to RR. Dash. Ex.S.1311 Driving Sleeve. 2 off. Ex.S.1312 Assembly of Driving Sleeve. 1 off. Ex.S.1313 Distance Piece. 4 off. Ex.S.1314 Plate - Gas Seal 1 off. Ex.S.1315 Tube " " 1 off. Ex.S.1316 Screw 2 off. Ex.S.1317 Bracket. 1 off. The following standard parts will also be required :- FB.3961 Hank Bush. 2 off. K.1904 Screw 2 off. K.9006 Washer 2 off. K.216 Bolt 4 off. K.4310 Nut 4 off. K.4407 Washer 4 off. K.9008 Spring Washer. 4 off. A detail drawing of the dash drilling will be issued at a later date. Kindly instruct one set. Ald {F. Allwood - Experimental Design} BY {R.W. Bailey - Chief Engineer} /Ald. {F. Allwood - Experimental Design} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).