New and replacement push rod parts for Bentley 60 and Bentley 80 models.
| Identifier | ExFiles\Box 123\5\ scan0258 | |
| Date | 19th January 1939 | |
| 10HH To HPS. {Horace Percy Smith - Experimental Factory Mgr} c. BY. {R.W. Bailey - Chief Engineer} c. BHC/Wld. c. Rm {William Robotham - Chief Engineer} /Swdl. {Len H. Swindell} c. Roy {Mr H. Royce - Buyer} /Les. for HPS. {Horace Percy Smith - Experimental Factory Mgr} Lecle BY {R.W. Bailey - Chief Engineer} /CS.4/B.19.1.39. Re: Bentley 60 and Bentley 80. Valves and Fittings. Section 5060. PD.332 - Push Rods. Please receive herewith blueprints of the following new parts detailed in accordance with the above scheme :- Fig: I. Replacing. EB.4527 - Push Rod, ) EB.4528 - Push Rod - End Top. ) EB.4199. EB.4529 - Push Rod - End Bottom. ) EB.4530 - Push Rod Assembly. EB.4531 - Adjusting Screw. EB.3287. Fig II. * EB.4526 - Push Rod. Please instruct as required, together with :- E.89386 - Adjusting Screw. EB.3287. * E.89387 - Push Rod End Top. * EB.3860 - Push Rod End Bottom. * Replacing EB.4199. To complete our instructions to the above scheme we are adding a groove to the Inlet Valve Guide EB.4000 to trap the Safety Ring - Alt. 20251/E. 1 Set of prints herewith to Roy {Mr H. Royce - Buyer} /Les. BY {R.W. Bailey - Chief Engineer} /CS. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).