Page 2 of a memo from E. to D.A. regarding modifications to a C piston ram and oil collecting groove.
| Identifier | WestWitteringFiles\D\November1919\ Scan28 | |
| Date | 27th November 1919 | |
| To DA. {Bernard Day - Chassis Design} from E. {Mr Elliott - Chief Engineer} -2- E1/G27/11/19 Contd. impractical, and plenty of holes should be drilled through the oil collecting groove in place of it. The ram on C piston is shewn with a spring, but it is desired not to use the spring unless it is found necessary. Would you kindly instruct the necessary material for carrying out the tests desired. E. {Mr Elliott - Chief Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).