List of proposed parts to be tested on a Bentley car intended for France.
| Identifier | ExFiles\Box 83\2\ scan0080 | |
| Date | 2nd July 1937 | |
| SG. {Arthur F. Sidgreaves - MD} from Rm {William Robotham - Chief Engineer} /Gry. {Shadwell Grylls} Hs. {Lord Ernest Hives - Chair} o-E. {Mr Elliott - Chief Engineer} 200a Rm {William Robotham - Chief Engineer} /Gry {Shadwell Grylls} 6/R.2.7.37. BENTLEY CAR FOR FRANCE. It is proposed to send 6.BIV. to France to get information on the following parts:- CHASSIS. X (1) Armstrong rod controlled dampers. X (2) Cheaper rear road springs. X (3) New exhaust system with nickel plated mild steel parts. X (4) Raised front engine mounting to LeC drawings. (5) Hardy Spicer Propeller Shaft. X (6) Schatz bearings in gearbox to reduce cost and length of Wraith box. X (7) Fixed radiator shutters and cheap thermostat. X (8) 'Non crackle' alum. brake drums with Girling rear brakes. Lead linings to prevent squeaks. X (9) Same axle parts that have already run 15,000 miles for further mileage. Pre-loaded bearings. X (10) Widney bonnet. X (11) New ignition coil with better performance at high temperatures, required as soon as possible on 25/30. X (12) Petrol pumps in Frame. (13) 6.50 x 17 tyres on 4" rims, silent pattern tread. X (14) Wraith steering box. X (15) Modified lubrication system for springs. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).