Letter from a supplier regarding the manufacture and replacement of back plates for springs.
| Identifier | ExFiles\Box 9\5\ 05-page099 | |
| Date | 28th June 1937 | |
| 646 JONAS WOODHEAD & SONS, LTD., MANUFACTURERS OF LAMINATED SPRINGS FOR ROLLING STOCK ROAD OR RAIL TRADE MARK REGISTERED. TELEPHONES: LEEDS 20814 AND 20815. (PRIVATE BRANCH EXCHANGE) LONDON MAYFAIR 4541 REG'D OFFICE AND WORKS: KIRKSTALL ROAD, LEEDS, 4. LONDON OFFICE: DEVONSHIRE HOUSE, STRATTON STREET, W.1. ON ADMIRALTY WAR OFFICE COLONIAL AND ALL LISTS ESTABLISHED 1850. TELEGRAMS: 'FORGE, LEEDS' CODE: 5th. Edition A.B.C. TELEGRAMS LONDON 'JOWOS' PICCY LONDON Messrs.Rolls-Royce Limited, Nightingale Road, DERBY. DATE 28th June, 1937 YOUR REF. Rm {William Robotham - Chief Engineer} /Les15/R OUR REF. THS/BMM Dear Sirs, BACK PLATES FOR SPRINGS FW.754. We have your favour of the 25th instant in connection with the above, and we note your remarks. The reason the eyes were welded was to enable us to drill the small oil hole, as we found we could not get through the gap in the scarf without welding. We much regret the out of round eye back plate you returned, which was seen by the writer, and special precautions are being taken with the four new plates to ensure satisfaction in this direction. We will send these off to you this week, and we now remain, Yours faithfully, JONAS WOODHEAD & SONS, LTD. J H Saunders DIRECTOR & TECHNICAL ENGR. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
