Summary outlining design requirements and proposed schemes for a new change gear system, focusing on silent operation and gear engagement methods.
| Identifier | ExFiles\Box 6\2\ 02-page104 | |
| Date | 20th September 1930 | |
| SG. {Arthur F. Sidgreaves - MD} } FROM R. {Sir Henry Royce} RB. {R. Bowen} } c. EG. Wor. {Arthur Wormald - General Works Manager} S. L.C. EP. {G. Eric Platford - Chief Quality Engineer} FR. X523 N1/20.9.30. X.523 X.531G X.731G CHANGE GEAR SUMMARY UPON WHICH OUR WORK IS BASED. It is understood and agreed that at least we must have a more silent 3rd. speed, but with idling and direct drive of the best possible silence. We cannot hope to get easy enough change with edge of teeth engagement, so that we must have at least jaw clutch engagement or brake control for the more important gears - (necessitating constant mesh gears). We (R. {Sir Henry Royce} and WW.) cannot believe that we ought to interfere with the main clutch (even as Salerni or Wilson have done). The foot control of this should be left as unaffected as possible. After years of experience we cannot see a way of getting a permanently good scheme except with epicyclic gear units. At present we have near completion 2 schemes which are alike in that the 1st, 4th and reverse are positive with jaw clutch engagement, and as these (except 4th) are used when the car is standing there seems no disadvantage. Blue The two schemes/are alike in the gear train, but, in the simpler (and perhaps also perfect to handle) form, the 2nd. and 3rd. are also obtained by jaw clutch. These are synchronised by brakes which is possible owing to the epicyclic form of gears, otherwise a clutch is used). The more elaborate scheme has for these 2nd. and 3rd. years brake engagement as used by Lanchester and Wilson, but in our case we only have two brakes instead of four, and these need only be less than half the capacity - i.e. half, and one, engine torque, instead of half, one, two, and four, engine torques. It should be understood that most of the devices confined almost entirely to American cars (except the Wilson gear) cannot be considered to solve the problem because :- | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).