Arrangements to fit a damped pendulum lever N. sch. 2800 onto EAC.7.
| Identifier | ExFiles\Box 17\3\ Scan330 | |
| Date | 17th October 1928 | |
| To DA. {Bernard Day - Chassis Design} from Hs {Lord Ernest Hives - Chair} /Rm. {William Robotham - Chief Engineer} X7430 Hs {Lord Ernest Hives - Chair} /Rml/LG17.10.28. X7450 With reference to DA {Bernard Day - Chassis Design} 3/M10.10.28. There is no doubt that we could arrange to fit the latest type damped pendulum lever N. sch. 2800 on EAC.7. You will appreciate however that it will necessitate using a steering shaft, side steering tube, front ball end etc. and various other details. You will also appreciate that we are putting all we know into the 'SS {S. Smith} '. As a matter of fact, we anticipate we shall have this pendulum lever running on 'SS {S. Smith} ' as soon as we can get it on EAC.7. However, if you still wish this lever to be tried on EAC.7. we will make the necessary bits. Hs {Lord Ernest Hives - Chair} /Rm. {William Robotham - Chief Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).