Instructions for ordering steering column, horn button, dip switch, and steering wheel components.
| Identifier | ExFiles\Box 109\3\ scan0202 | |
| Date | 12th September 1941 | |
| _cont'd- - 2 - Rm {William Robotham - Chief Engineer} /HH.5/SW.12.9.41. The Steering Column and Box is being brought from Messrs. Burman & Sons, complete with Pendulum Lever to our drawing RF.2525 by Ev {Ivan Evernden - coachwork} /DB. {Donald Bastow - Suspensions} The Horn Button is a standard Lucas button to their drawing No. 323790. When ordering this, will Rm {William Robotham - Chief Engineer} /RC. {R. Childs} please note that 3 inserts to Lucas drawing No. 321087 will also be required for moulding into our Control Quadrant. The Dip Switch is also a Lucas piece, and will be ordered to their drawing No. 323342, by Rm {William Robotham - Chief Engineer} /RC. {R. Childs} The Steering Wheel will be ordered by Ev {Ivan Evernden - coachwork} /JD. {J. Draper - Frames} This completes our instructions for the above section. Rm {William Robotham - Chief Engineer} /HH. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).