Particulars and test bench results for the EAC 'V' Series engine.
| Identifier | ExFiles\Box 69\4\ scan0278 | |
| Date | 1st February 1925 | |
| R.R. 493A (50H) (D.B. 175 25-9-24) J.H.D. -5- EXPERIMENTAL REPORT. Expl. No. REF: Hs {Lord Ernest Hives - Chair} /ACL/LG6.2.25. SOME PARTICULARS OF EAC. 'V' SERIES. Bore and stroke. 4.25 X 5.5" Swept vol. 1 cyl. 78.02 cu.ins. or 1278 c.c. Total swept vol. 468.12 cu.in. or 7668 c.c. Firing order 1. 4. 2. 6. 3. 5. Water capacity of engine only 2.7 galls. Speed of maximum output 2500 r.p.m. 7.2º = 1" on flywheel. 1 tooth on timing makes 7 1/2º difference on flywheel. B.M.E.P. from dyno' lift For WN/2400 dyno' only. B.M.E.P. = 0.705 W lbs.sq.in. 110º Camshaft is used. POWER OUTPUT OF EAC. 'V' SERIES ENGINE - Test bench results. These tests were taken with an open cutout. The exhaust system used consisted of the standard manifolds and 2" lead pipes. These pipes run into a 3" pipe which is carried to a standard 40/50 HP. silencer. See sketch :- From front cyl. From rear cyl. 2" dia. 2" dia. 3" dia. To std. 40/50 HP. silencer. EXHAUST BRANCH USED. contd :- | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).