Investigation into the failure of a P&R battery cell due to the stretching of positive plates.
| Identifier | ExFiles\Box 54\1\ Scan305 | |
| Date | 3rd October 1928 | |
| ROLLS-ROYCE LTD. INSTRUCTIONS. To: G.F.G. Order No.: IC130. Customer's No.: X 4617S. Re Failure of P&R cell in SX Battery (159) One P&R cell has failed in this battery (cell no 4) after having run 13,787 miles + been on our bench life test - 9 mths. {Reg Matthews} The cause of failure was due to the stretching of the positive plates allowing sediment to accumulate on the top of the separators. The plates + separators were in good condition & the positive plates had lost very little paste. This cell was replaced by a P&R cell from S4 battery. Signed: G.G. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).