Required and obsolete parts for the Bentley III chassis rear frame end.
| Identifier | ExFiles\Box 99\2\ scan0206 | |
| Date | 29th April 1938 | |
| To RPS. c. BY. {R.W. Bailey - Chief Engineer} c. RRC/OAN. c. Rm {William Robotham - Chief Engineer} /Les. BY {R.W. Bailey - Chief Engineer} /HEB. {H. Biraben} 1/WB. {Mr Brazier / Mr Bell} 29.4.38. A.P.M. 427. BENTLEY III CHASSIS. BOX SECTION FRAME SIDE MEMBER REAR END FCD.633. FRAME AND FITTINGS - SEC : 7000. Please receive herewith two blue prints of each of the following parts with an extra print of part marked @, which have been detailed in accordance with the above scheme :- FB.3809 Frame Stiffener Rear End.(R.H.) 1 off per chassis. FB.3810 " " " (L.H.) 1 " " " @ FB.3811 Bumper Bracket (Rear) 2 " rplg.FB3235/6. FB.3815 2nd Crossmember. 1 " " FB3800. The following standard parts will be required :- K.422. .375 x 2.500 Bolt for Bumper Bkt. 4 off per chassis K.4316. .375 Dia: Lock Nut " " 4 " " " K.9010. .375 " S.Washer " " 4 " " " K.454. .375 " Bolt, Rear XMember Support. 4 " replg.K408. K.4316. .375 " L.Nut, " " 4 " K4010 The following standard parts will not be required:- K.4011. .4375 Nut, Rear Bumper Bkt. 6 off. K.9011. .4375 Washer. " " 6 " KB.2907. .4375 Bolt. " " 2 " KB.2909. " " " " 4 " We attach to Rm {William Robotham - Chief Engineer} /Les' copy of this memo, one blue print of FB.3809/10. (sens to J.T.R.) 29/4/38 The Bentley '50' Frame Stiffener will be similar to FB.3809/10 only 2.750 longer at the narrow end. Please note. BY {R.W. Bailey - Chief Engineer} /HEB. {H. Biraben} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).