Modification of a radiator matrix unit and the fitting of new mounting blocks.
| Identifier | ExFiles\Box 9\3\ 03-page118 | |
| Date | 20th July 1938 | |
| 640 To HPS. {Horace Percy Smith - Experimental Factory Mgr} from Rm {William Robotham - Chief Engineer} /Std. c.c. Rm {William Robotham - Chief Engineer} /Wym. {G. Harold Whyman - Experimental Manager} Rm {William Robotham - Chief Engineer} /Std.6/MH. {M. Huckerby} 20.7.38. We have removed the radiator matrix unit from 26.G.VI car in the Garage, and are handing it to the radiator shop. Will you please instruct them to modify the water inlet nozzle in the same way they did that of 28.G.VI, i.e. provide one delivery slot .750" wide x 2" long projecting water to the nearest side of the top tank. The order number for the job is 52439. Rm {William Robotham - Chief Engineer} /Std. P.S. Will you also please re-fit the matrix unit while above car is in the shop, and at the same time fit the new rubber mounting block, durometer 60-65. (We will supply this). | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).