Blueprints and parts for the 'Japan III' project, covering cylinder, inlet pipes, carburetter, and silencer sections.
| Identifier | ExFiles\Box 102\1\ scan0064 | |
| Date | 11th December 1931 | |
| To RHC. {R. H. Coverley - Production Engineer} c. HS {Lord Ernest Hives - Chair} /Rn. {Mr Robinson} X5080 BY {R.W. Bailey - Chief Engineer} /CS.5/EH.11.12.31. X5050 X5080 X5230 Re Japan(Experimental Engine) III - Cylinder - Section 5050 Inlet Pipes - Section 5070 Carburetter - Section 5080 Silencer for Exhaust Heated Throttle - Sec: 5231 ----------------------------------------------------------- Please receive herewith blueprints of the following, detailed to Scheme 1380:- Section 5050. E.57538 Washer (Inlet Branch) 6 off. E.57539 " ( " " ) 2 " Section 5070. E.57536 Inlet Pipe (Front) 1 off. E.57537 " " (Rear.) 1 " E.57540 Dowel for Induction pipe 1 off E.57608 Restriction Washer (Inlet Pipes) 1 off. E.57609 Washer (Inlet Pipes) 1 off. Section 5080 E.57542 Carburetter Air intake 1 off. E.57549 Breather Pipe 1 " E.57611 Stud (Carburetter) 2 " Will you please instruct up three sets of the above, to-gether with a similar quantity of the following:- Section 5050. G.54601 Stud (Inlet Flanges) 18 off. K.4008 Nut for ditto. 18 off. K.9008 F.S. Washer for ditto.18 off. Section 5070. E.50922 Plug (Large) Inlet Pipes. 2 off G.75549 Washer for ditto. 2 " K.209 Bolt 3 " K.4008 Nut 3 " K.9008 F.S. Washer 3 " Section 5080 E.55407 Breather Elbow E.55408 Breather Gauze E.55409 " " Frame E.51694 Union (Carburetter Drain) E.55004 Union Nut for ditto E.51296 Nipple for ditto. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).