Request to order Goshawk dynamo brushes from The Morgan Crucible Co.
| Identifier | ExFiles\Box 50\5\ Scan024 | |
| Date | 23th February 1922 | |
| V4333 To Wd. {Mr Wood / Mr Whitehead} from EFC. {E. Fowler Clarke - Electrical Engineer} EFC {E. Fowler Clarke - Electrical Engineer} 2/T23.2.22. X.4333 - GOSHAWK(Aero Engine)(Codename for 20HP Car / Aero Engine after Kestrel(Aero Engine)) DYNAMO BRUSHES. X 3745 Would you kindly order up from The Morgan Crucible Co. 4 sets (one dozen brushes) in their H.M.6 Morganite to print D.50301. Kindly note that as before the terminal D.50302 will be produced by us and therefore the pig-tail as supplied should be without this piece. These brushes are required for experimental test on the Goshawk(Aero Engine)(Codename for 20HP Car / Aero Engine after Kestrel(Aero Engine)) dynamo and to be used in case of emergency, i.e. if further the Le Carbone Grade C brushes are not delivered by the time they are required, it being known that the Morganite Company will be more prompt with despatch. EFC. {E. Fowler Clarke - Electrical Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).