List of parts required for an experiment on the Bentley II Chassis Crankcase, Bearings, and Clutch Operating Mechanism.
| Identifier | ExFiles\Box 132\3\ scan0050 | |
| Date | 8th April 1936 | |
| c. Hs {Lord Ernest Hives - Chair} /Gry. {Shadwell Grylls} X216 BY {R.W. Bailey - Chief Engineer} /CS6/EH.8.4.36. Re Bentley II Chassis - Crankcase & Bearings - Sec:5000. N.Sch.4776 - Clutch Operating Mechanism Bentley Cantilever Pedals. The following existing parts will require instructing up for the above experiment. E.B.1979 Crankcase - Bottom Half replaces E.B.1855. E.B.1980 Bracket - Tie Rod 1 off. E.B.1981 Ball Pin 1 " E.B.1982 Stud - Bracket 2 " K.4209 Castellated Nut 2 " K.4602 Split Pin 1 " K.4009 Nut - Bracket Studs 2 " K.4009 Flat Spring Washers 2 " For all other parts to complete this experiment refer to LOP. E.B.2737. BY {R.W. Bailey - Chief Engineer} /CS. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).