To Mr. Dalley providing feedback on the design of a Valve Tappet Spanner, E4372.
| Identifier | ExFiles\Box 79\2\ scan0134 | |
| Date | 2nd July 1914 | |
| R.R. 235A (150 H) (W.W. 529. 2-7-14) G. {Mr Griffiths - Chief Accountant / Mr Gnapp} 0670. ( C O P Y ) Re. Valve Tappet Spanner - E4372. Na. {Mr Nadin} Mr.Dalley. EP {G. Eric Platford - Chief Quality Engineer} 3/W18614. I have received the above, but the spanner does not appear to be exactly on the lines of the original idea. It may be an improvement, but at present I cannot see it. The jaw at each end of the spanner should be the same size, so that two tappets can be locked at once. I shall be glad to hear further from you on this matter. EP. {G. Eric Platford - Chief Quality Engineer} [Stamp: W.M. 10 JUL 1914] [Watermark: 1804] [Watermark: MADE AT CROXLEY] | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).