Parts and blueprints for the Wraith front engine mounting and damper fixings.
| Identifier | ExFiles\Box 8\7\ 07-page44 | |
| Date | 30th September 1937 | |
| BY {R.W. Bailey - Chief Engineer} /NS. {Norman Scott} 3/G.30.9.37. 622 WRAITH - FRONT ENGINE MOUNTING. Please receive herewith two blueprints of:- S.CD.22 Fixing for 25/30 Dampers, to Wraith. (Issue 2). We also send :- Issue 2. Ex.S.16 } Bracket Front Engine Mounting. R.H. 1 off. Ex.S.17 } Upper. L.H. 1 off. Ex.S.118 } Bracket Front Engine Mounting. L.H. 1 off. Ex.S.119 } Lower. R.H. 1 off. Ex.S.120 Distance Piece. 2 off. Ex.S.121 Washer 6 off. S.CD.22 (Issue 2) supersedes S.CD.22 (Issue 1) - see memo BY {R.W. Bailey - Chief Engineer} /NS. {Norman Scott} 1/G.23.8.37. These pieces are required to suit the re-arrangement of Damper Rubbers shewn on S.CD.22 (Issue 2). This modification has been made at the request of Rm {William Robotham - Chief Engineer} /Wmn. The following parts will also be required :- K.4211 Nut 2 off. K.4608 Split Pin. 2 off. K.105 Bolt 6 off. K.4006 Nut 6 off. K.9006 Washer 6 off. F.60862 Washer 2 off. Will you kindly instruct two sets of these pieces. BY {R.W. Bailey - Chief Engineer} /NS. {Norman Scott} Note: 1 set of these prints has been handed to Rm {William Robotham - Chief Engineer} /Wmn. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).