List of vehicle modifications and specifications, including instructions on ordering parts.
| Identifier | ExFiles\Box 5a\1\ 01-page155 | |
| Date | 28th May 1931 | |
| - 2 - BY {R.W. Bailey - Chief Engineer} /Cgh {W Clough} /G.28.5.31. X 14/- One spare wheel to be carried on the offside instead of at the rear. Spare wheels will only be carried at the rear when specially ordered. If a second spare wheel carrier is ordered, in addition to the standard one on the offside, this should be fitted on the nearside. 15/- Modified bonnet side rest plates and pressed aluminium cover for steering pendulum lever. 16/- Universal type dash suitable for overlapping bonnet but standard in regard to overall dimensions and contour. 17/- Modified gearbox and engine undershields. X 18/- Extended swan neck exhaust pipe and support as per XX Sch.1473. Material for items 5, 6, 7, 9, 11 and 14 should not be ordered until we receive permission either by standardisation sheet or from the Administration. -------------- Will BY {R.W. Bailey - Chief Engineer} /HER. please note that the front and rear dampers should include the following special features :- a {Mr Adams} /- Split piston. b/- Ball joints lubricated from the lower end and oil pipe deleted from the arm. c/- Use 40/50 HP. shock damper for front and modified for the rear. BY {R.W. Bailey - Chief Engineer} /Cgh. {W Clough} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).