Replacement parts for the Phantom III Ignition Distributor to allow for micrometer adjustment.
| Identifier | ExFiles\Box 61b\2\ scan0318 | |
| Date | 12th February 1936 | |
| c. Hs {Lord Ernest Hives - Chair} /Wst. WST 6119. BY {R.W. Bailey - Chief Engineer} /RD2/W.12.2.36. "Phantom III" Ignition Distributor. LeC.4950. Please receive herewith blue prints of the following parts required to provide micrometer adjustment for contact breakers :- x D.75463. Base. 2 off. D.75464. Cam. 2 off. D.75465. Stud. 4 off. D.75466. Stud. 2 off. D.75467. Pinion. 2 off. D.75468. Dist.Piece. 2 off. D.75469. Lever. 2 off. K.9006A. Spring Washer. 6 off. K.4307A. Lock Nut. 6 off. x :- This item can be produced from the existing distributor base D.75155. The above parts replace the following on the standard L.O.P. D.75167 :- D.75155. Distr.Base. D.75160. Cam. D.74232. Stud. D.74487. Pin. E.40658. Retaining Collar. E.19084. Nut. E.71154. Taper Pin. K. {Mr Kilner} 4646. Split Pin. Will you please put in hand as required. These parts must be used in conjunction with those issued by E.Department in BY {R.W. Bailey - Chief Engineer} /CS5/EH.12.2.35. BY {R.W. Bailey - Chief Engineer} /RD. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).