Communication about a failed alteration request for Bentley III Chassis rear axle hypoid bevel gears from Gleason Works.
| Identifier | ExFiles\Box 98\1\ scan0117 | |
| Date | 27th November 1937 | |
| Rm {William Robotham - Chief Engineer} /Gry. {Shadwell Grylls} 200 B 402 Cgh. {W Clough} 3/W.27.11.37. Bentley III Chassis. Rear Axle Hypoid Bevel Gears. Further to Cgh. {W Clough} 11/W.22.11.37 in connection with the three sets of 10 x 43 ratio hypoid bevel gears which we have requested the Gleason Works to supply, a cable was sent to them asking if they could leave the shank of the pinion so that it could be ground 35 m {Mr Moon / Mr Moore} /m. diameter and 2" longer, but they have replied that the gears are being cut, consequently it is too late for this alteration to be introduced on these three pairs. Cgh. {W Clough} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).