Instructions regarding a change to a new Dynamo Armature and the dispatch of corresponding blueprints.
| Identifier | ExFiles\Box 60\1\ Scan044 | |
| Date | 21th June 1928 | |
| X7660 To RHC {R. H. Coverley - Production Engineer} [Struck Through] C. EFC. {E. Fowler Clarke - Electrical Engineer} BY {R.W. Bailey - Chief Engineer} /RD6/ML21.6.28. S.S. DYNAMO - L&C.2501. SECTION 8070. In our previous instructions for the Armature of the Dynamo on this chassis we were anticipating using an existing 28 slot, but as this is required by EFC. {E. Fowler Clarke - Electrical Engineer} for other purposes and we have now to make a new one, we propose to set the commutator in the same position as the 20 H.P. - 28 slot Armatures, so we therefore, send you herewith blueprints of D.71653 - Armature Assembly and D.71653 - Armature L.O.P. This will not affect any material you may have on order. The other Sections for this machine are to our memo - BY {R.W. Bailey - Chief Engineer} /RD7/ML30.5.28. [Stamp] RECEIVED 21 JUN 1928 BY {R.W. Bailey - Chief Engineer} /RD. Hs {Lord Ernest Hives - Chair} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).