Blueprint for a Clevite bush with dimensions and inspection methods.
| Identifier | ExFiles\Box 9\7\ 07-page116 | |
| Date | 15th October 1935 | |
| CHAMFERED END. .050" STEEL. 1/64" RAD. REMOVE SHARP CORNER 15° to 20° .038/.040 11/16" + - 1/64 REMOVE SHARP CORNER 1/8" R. {Sir Henry Royce} 3/8" DIA HOLE. 1/8" RAD. OIL GROOVE 1/8" WIDE .025" DEEP MAX. OUTSIDE DIA: 1.298 1/2" PRESS FIT IN 1.295 1/2 / 1.296" HOUSING. WHEN PRESSED INTO 1.2955 HOUSING. BORE DIA: 1.1145 / 1.1205 LEAVING FOR REAMERING IN POSITION. METHOD OF INSPECTION. THE BUSH SHOULD HAND PUSH FIT INTO 1.2995" RING GAUGE WHEN IN RING GAUGE TRY BORE WITH PLUG GAUGE. 1.1175" GO / 1.1245 NO GO Nº 881.B. DRN:- C.F. H. {Arthur M. Hanbury - Head Complaints} DATE 15.10.35 MATERIAL 25% CLEVITE .088" - .090" VANDERVELL PRODUCTS LIMITED WESTERN AVENUE, PARK ROYAL, LONDON, W.3. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).