Drawing of a tubular shaft assembly with associated joints and dimensions.
| Identifier | ExFiles\Box 148\4\ scan0025 | |
| Date | 12th April 1933 | |
| K3-2-119 K3-1-39 SB {Mr Bull/Mr Bannister} -47Y K3-2-18 K3-5-38 K3-3-38 3-1-39 K3-16-43 3-15-33 TUBULAR SHAFT ASSEMBLY K3-62-216-GB112- PART N° K3-42 -GB11 K3-26-27 4 - 7/16 DIA BOLT HOLES 1.875 R 1.874 2.250" PILOT DIA x 3/64" HIGH 2.248" 1351 JOINT 40° SECTION A-A 3/8 DIA 13/16 R 11/16 R .135 DIA .133 1.187 DIA 1.182 1345 1344 CAM TAP 1/8" GAS OR 3/8" BSF NOTE:- ARROWS MUST BE IN LINE THEY ALIGN TRUNNIONS FACE TO FACE LENGTH TUBULAR SHAFT ASSEMBLY LENGTH. .085 WALL TUBE LENGTH (16-32-CB22- ) STAMP: HARDY SPICER & CO LTD, MAY 11 1933, DRAWING OFFICE NOTE:- USE TUBE BALANCING CONSTANTS INCH/LBS. TORSION TEST WHIP TEST RPM. CUSTOMER'S REFERENCE TITLE BLOCK: KR TYPE 1351-1358 JOINT SET HARDY SPICER & CO. LTD BIRMINGHAM ENGLAND DATE - 12-4-33 SCALE:- FULL SIZE DRAWN - JM. {Mr Morley} TRACED - CHECKED - GB. NOTE N° CHANGED FROM BY DATE 1358 JOINT | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).