Unsatisfactory friction arrangement on the EAC.V11 servo linkage, noting an underperforming spring.
| Identifier | ExFiles\Box 12\5\ 05-page030 | |
| Date | 24th February 1927 | |
| To DA. {Bernard Day - Chassis Design} from Hs {Lord Ernest Hives - Chair} /Rn. {Mr Robinson} X9420 Hs {Lord Ernest Hives - Chair} /Rm {William Robotham - Chief Engineer} 3/LG24.2.27. RE, FRICTION ON EAC.V11 SERVO LINKAGE. X7370 The friction arrangement for the swinging link on EAC.V11 is unsatisfactory. We give below a report from GWH. {George W. Hancock - Head Chateauroux} We should be obliged if you would look into this matter. "The spring G.75326 does not give the required load. We get a max. load of 16 lbs. and we require 25 lbs. We have taken this matter up with the D.O. but they say it is a question of design. At the present time we have packed the spring up on 14-EX to overcome front brake thumps but this will have to be changed before the car is finished off". GWH. {George W. Hancock - Head Chateauroux} Hs {Lord Ernest Hives - Chair} /Rn {Mr Robinson} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).