Suggestion to modify brackets on the front brake intermediate shaft for the Wraith III model.
| Identifier | ExFiles\Box 7\7\ X 606 Brakes-page086 | |
| Date | 21th October 1937 | |
| Handwritten: MARTIN DOLE Handwritten: 686 Handwritten: Any Comments? Handwritten Signature: Rm {William Robotham - Chief Engineer} [redacted] from HPS {Horace Percy Smith - Experimental Factory Mgr} /RH. {R. Hollingworth} c.c. to [redacted]y. c. to [redacted]m. {Mr Moon / Mr Moore} or to [redacted]ay. Handwritten: File HPS {Horace Percy Smith - Experimental Factory Mgr} /RH. {R. Hollingworth} 1/CB.21.10.37. WRAITH III. Front Brake Inter: Shaft. M.Sch.5138. Two brackets on lower half crankcase, as shown on the above scheme, i.e. SW.1257 stop bracket, and SW.1029 anchor plate for silencer, lie close to one another, and with slight modification one bracket will serve the two purposes. Suggest that stop bracket SW.1257 be deleted, and anchor plate SW.1029 modified to include a stop with turned down lip, as shown on attached sketch Ex. I.238. The stop boss on inter: lever GW.1660, will require lengthening by approx. .200 to suit. The detail drawing for inter: lever GW.1660 shows the stop boss on the wrong side. HPS {Horace Percy Smith - Experimental Factory Mgr} /RH. {R. Hollingworth} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).