Recommendation for cadmium plating on Phantom chassis parts based on long-term testing.
| Identifier | ExFiles\Box 30\6\ Scan045 | |
| Date | 1st October 1928 | |
| K1360 To R. {Sir Henry Royce} from Hs {Lord Ernest Hives - Chair} /GWH. {George W. Hancock - Head Chateauroux} Hs {Lord Ernest Hives - Chair} /GWH {George W. Hancock - Head Chateauroux} 1/LGS.10:28. c. to B.J. Wor. {Arthur Wormald - General Works Manager} c. to E. {Mr Elliott - Chief Engineer} DA. {Bernard Day - Chassis Design} c. to BY. {R.W. Bailey - Chief Engineer} PHANTOM CHASSIS. RE. CADMIUM PLATING. We recommend the following parts to be cadmium plated. We have run 10,000 miles on 12-EX with most of the parts recommended and the condition of these is as first plated. We have included additional parts which were not plated on 12-EX that were found to be slightly rusted. Cadmium plating we find to be equal to sher- ardising in results. The cost is reported to be about the same, but the plating will be more convenient to adopt. Hs {Lord Ernest Hives - Chair} /G.W.Hancock. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).