Request to manufacture two cast iron servo drums to replace problematic steel drums on Wraith and B.III models.
| Identifier | ExFiles\Box 99\3\ scan0178 | |
| Date | 16th March 1938 | |
| To HPS. {Horace Percy Smith - Experimental Factory Mgr} from Rm {William Robotham - Chief Engineer} /AFM. {Anthony F. Martindale} c. Rm {William Robotham - Chief Engineer} /Wym. {G. Harold Whyman - Experimental Manager} c. Rm {William Robotham - Chief Engineer} /FD. {Frank Dodd - Bodies} #41. Rm {William Robotham - Chief Engineer} /AFM. {Anthony F. Martindale} 3/AP.16.3.38 WRAITH & B.III. SERVO DRUMS. Will you please make 2 pieces to Rm. {William Robotham - Chief Engineer} 507, this being similar to GW.1025 except for material. When ready we will have one fitted to a Wraith, the other to a B.III. We are having a little trouble on Wraith & B.III. with steel drums; cast iron will make a better rubbing surface, less prone to judder. The trouble is being accentuated by bad finish - the surfaces should be polished where marked on the drawing. On B.III. we have had to pull down the servo and polish it in the Garage. Rm {William Robotham - Chief Engineer} /AFM. {Anthony F. Martindale} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).