Requesting the production and fitting of standardised ball bearing servo cams.
| Identifier | ExFiles\Box 105\4\ scan0082 | |
| Date | 8th November 1931 | |
| RHC. {R. H. Coverley - Production Engineer} from Hs {Lord Ernest Hives - Chair} /Rm. {William Robotham - Chief Engineer} Hs {Lord Ernest Hives - Chair} /Rm. {William Robotham - Chief Engineer} 9/AM.8.11.31. X5370 SERVO CAMS. The babl bearing servo cams are now being standardised and we should therefore get them fitted to all our cars. Will you therefore please arrange to produce 3 pairs of 45° and 3 pairs of 35° cams for the 40/50. We should also like 20-GIV and 19-GIN to have ball bearing cams fitted similar to those which are now being run on 18-GIV in France. Hs {Lord Ernest Hives - Chair} /Rm. {William Robotham - Chief Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).